Hi there,
I have a Cisco WLC 2100 that i have configured to have 2 networks on 2 different VLANS, they are setup on the config as ssid 'guest' and 'staff' I have setup on my ciscos dhcp scopes to serve these seperate vlans.
eg this is the config on the core switch for the guest VLAN
ip dhcp pool vlan8
network 10.3.1.0 255.255.255.0
domain name mydomain.com
dns server 10.2.1.4
default router 10.3.1.1
lease 3
then on the WLAN controller i have the 5th interface plugged in to a cisco switch and the port is set to this vlan. Then on the wlc i have an interface setup for the 5th port given it the ip address of 10.3.1.5 and the primary dhcp server is set to that of our core switch. But DHCP does not come through via the wireless. I have plugged a pc direclty in to the port on the switch and it get's an address from the switch.
I have also gone in to the wlans > and clicked on the profile name and edited the DHCP server override and inserted the core switch ip in there. But still no luck.
any ideas please?
Start Free Trial