I know I can use a radius server, however I do not have one in place and I also do not want to create a list of designated users to authenticate on as this will be a publicly accessible access point.
All I want to do is setup the AP to utilize WPA-PSK so that i can assign a personalized passphrase easily remembered as the security code in order to connect to the device and utilize its connection to the internet. It will not be utilize to enter the LAN environment.
Main Topics
Browse All Topics





by: ikalmarPosted on 2009-09-22 at 08:02:41ID: 25393613
You able to do radius server on it!
/products/ hw/wireles s/ps4570/ p roducts_co nfiguratio n_example0 9186a00801 c0912.shtm l
Co nfiguring_ WDS_using_ a_local_RA DIUS_serve r
aaa group server radius rad_eap1
server 1.1.1.1 auth-port 1812 acct-port 1813
!
aaa authentication login default local
aaa authentication login eap_methods group radius
aaa authentication login eap_methods1 group rad_eap1
!
Int loop 0
ip add 1.1.1.1
!
radius-server local
nas 1.1.1.1 key xxxxxxxxx
group mygroup
ssid wlann
reauthentication time 300
!
user yourname nthash 7 xxxxxxxxx group mygroup
http://www.cisco.com/en/US
http://inetpro.org/wiki/