Some apps dead, Repair Disk with Disk Utility on Lacie Bigger Disk Extreme 1.6TB Firewire drive gives:
Repairing disk failed with error Could not unmount disk
Repair Permissions unavailable.
Name : LaCie Group SA
Type : Disk
Disk Identifier : disk1
Media Name : LaCie Bigger Extreme Media
Media Type : Generic
Connection Bus : FireWire
Connection Type : External
Connection ID : 58629585214331531
Partition Type : Apple_partition_scheme
Device Tree : /PCI0@0/P2P0@9/node@d04b4c
10075a8b/s
bp-2@c000/
@0:0
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : Yes
Location : External
Total Capacity : 1.5 TB (1,600,353,468,416 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
All drives (2) Mac OS Extended (Case-sensitive, Journaled), good idea?
Repair Permissions works on IBM/Hitachi Deskstar 120GB IC35L120AVV207-0 (boot drive) but more or same problems currently always present clicking immediately after.
Name : IC35L120AVV207-0
Type : Disk
Disk Identifier : disk0
Media Name : IC35L120AVV207-0 Media
Media Type : Generic
Connection Bus : ATA
Connection Type : Internal
Connection ID : Device 0
Partition Type : FDisk_partition_scheme
Device Tree : /PCI0@0/IDE0@6/PRI0@0/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 115.0 GB (123,522,416,640 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 0
Partition Number : 0
Downloaded firmware from Lacie site which was updated recently but drive's been superseeded with 3 tray model, safe to apply?
Biggest F800 firmware 1.40
Fixes:
- Fixed PATA hard drive detection issue.
- Fixed allocation ID issue of Hard drive, if move one of hard drive of F800
to another F800 After rebuilding the F800 can't recognize the hard drive.
For firmware flashing procedure for Mac-Biggest F800, please click here.
The firmware upgrade procedure for PC is detailed in the Users Manual.
Posted: 21 October 2005
Last Firmware [209 KB]
10073
Oynx causes fatal languages crash screen near half way, Disk Warrior crashes after entering password, TechTool Pro 4.0.6 not tested, 4.1.1 wont accept serial and crashes after hammering.
What is advisable?
Mac OS X 10.4.3 Build 8f1111a (intel)
Kind regards,
S
Start Free Trial