Hello:
I have installed mrtg at my remote linux box, it installed successfully.
But when I am running command
/usr/local/mrtg-2/bin/cfgm
aker --global 'WorkDir: /var/www/html/mrtg' --global 'Options[_]: bits,growright' --output /var/www/html/bmesrv/cfg/m
rtg.cfg public@70.84.220.98
Its gives the following output:
--base: Get Device Info on public@70.84.220.98:
SNMP Error:
no response received
SNMPv1_Session (remote host: "70.84.220.98" [70.84.220.98].161)
community: "public"
request ID: 682228112
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../l
ib/mrtg2/S
NMP_util.p
m line 450
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on public@70.84.220.98:
at /usr/local/mrtg-2/bin/cfgm
aker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifDescr scanning because public@70.84.220.98: does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because public@70.84.220.98: does not seem to support it
--snpo: Skipping ifName scanning because public@70.84.220.98: does not seem to support it
--snpo: Skipping ifType scanning because public@70.84.220.98: does not seem to support it
--snpo: Skipping ifPhysAddress scanning because public@70.84.220.98: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "70.84.220.98" [70.84.220.98].161)
community: "public"
request ID: 682228118
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../l
ib/mrtg2/S
NMP_util.p
m line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on public@70.84.220.98:
at /usr/local/mrtg-2/bin/cfgm
aker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "70.84.220.98" [70.84.220.98].161)
community: "public"
request ID: 682228119
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../l
ib/mrtg2/S
NMP_util.p
m line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on public@70.84.220.98:
at /usr/local/mrtg-2/bin/cfgm
aker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "70.84.220.98" [70.84.220.98].161)
community: "public"
request ID: 682228120
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../l
ib/mrtg2/S
NMP_util.p
m line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on public@70.84.220.98:
at /usr/local/mrtg-2/bin/cfgm
aker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "70.84.220.98" [70.84.220.98].161)
community: "public"
request ID: 682228121
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../l
ib/mrtg2/S
NMP_util.p
m line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on public@70.84.220.98:
at /usr/local/mrtg-2/bin/cfgm
aker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "70.84.220.98" [70.84.220.98].161)
community: "public"
request ID: 682228122
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../l
ib/mrtg2/S
NMP_util.p
m line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on public@70.84.220.98:
at /usr/local/mrtg-2/bin/cfgm
aker line 107
--base: Writing /var/www/html/bmesrv/cfg/m
rtg.cfg
I have iptables firewal configured on my Linux Box and 161 port is open.
Kindly advise
Regards
Start Free Trial