Shaun Wingrin
asked on
CentOS 5 / Elastix Installation of Driver kickstart issue
Say, After the driver is loaded from USB, installation can't find CDRom to continue - see attached errors.
Help...
One easy solution seems to just load the CDRom Driver...but how?
Help...
One easy solution seems to just load the CDRom Driver...but how?
Why don't you simply kickstart using USB? The problem lies in the stage 1 boot. Once the system boots and the kickstart tries to mount nfs, if that is the option you chose, then it should not have any problem.
And is your kickstart file name ks.default.cfg?
Is it located in the root directory of your CDROM?
Is it located in the root directory of your CDROM?
You may also try using dd
boot: linux ks=cdrom:/ks.default.cfg dd
boot: linux ks=cdrom:/ks.default.cfg dd
ASKER
ks.default.cfg is the file name in the root of CD.
However as per error above it can't read the CD after is loads from the USB....
Where would I issue this command?
You may also try using dd
boot: linux ks=cdrom:/ks.default.cfg dd
However as per error above it can't read the CD after is loads from the USB....
Where would I issue this command?
You may also try using dd
boot: linux ks=cdrom:/ks.default.cfg dd
Why don't you use USB to kickstart?
So at the menu
boot:
Enter this:
boot: linux ks=hd:sda1:/ks.default.cfg
So at the menu
boot:
Enter this:
boot: linux ks=hd:sda1:/ks.default.cfg
ASKER
Must I burn the install to the usb 1st?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
What's the simplest alternate way to setup? I've only the CD
Do you have more than 1 cdrom on the system?
is the cdrom Connected by USB
If you have multiple try using the other CDrom or disabling/ disconectig one of them
If your CDROm is a USD Cdrom, Try using another usb port, or find a bios USB option for legacy or 1.0 speed.
hth
Rodrigo o
Xnet
is the cdrom Connected by USB
If you have multiple try using the other CDrom or disabling/ disconectig one of them
If your CDROm is a USD Cdrom, Try using another usb port, or find a bios USB option for legacy or 1.0 speed.
hth
Rodrigo o
Xnet
ASKER
Needed to setup http server & continue install from it. Used Tinyweb server. Tip: used port 8080 & at one point need to specify folder as /
ASKER
IMG-20111219-00038.jpg
IMG-20111219-00039.jpg