I have a new install of RedHat ES4 that I cannot get VNC to cooperate in. Actually things look OK on the Linux side, but when I try to connect to a Linux session via VNC from my WIndows deskt...
I have two systems connected to the same router. One is a WinXP machine and the other is CentOS 4. Both machines can ping each other (after I enabled icmp responses in the windows firewall). I...
Hi,
Can you please help me installing wireless and sound card on Dell Latitude D620?
OS: Red Hat EL
uname -r
2.6.9-42.0.0.0.1.EL
Thanks and Regards,
Badri.
Hi, I am running squid 2.5 Stable 3 on mandrake 9.
I have managed to install squid and get it working without authentication. I then compiled and installed MSNT authentication program and ...
I upgraded and Make/ Make dep, etc with a new distro of Apache.
Previously HTTPD start was in rc.d httpd this calls the older version which lives in /usr/sbin/httpd (an executable)
Now I ...
Hi All..here is the problem..
I have a Hardy Server..
Originally /dev/hda1 was 80Gb O/s & Swap.. /dev/hdb was 122Gb single partition../dev/hdc is a 250Gb drive was partitioned to match 122...
Hi,
At each times after booted up centOS, I need to startup samba manually.
I want to ask how to make the centOS 5 startup samba at each times of rebooting automatically?
Thanks
Franci...
I'm trying to mount my windows partition in SLED. When i issue the command i get an error. I will try to provide as much info as possible.
linux-l3cn:/home/jose # mount -t ntfs /dev/hda1 ...
I cannot get dual head to work on my laptop with centos 5. Here is my xorg.conf. Please help
# Xorg configuration created by system-config-display
Section "ServerLayout"
Ident...
We have a new Intel server with hardware RAID (Intel RAID controller) and two x SATA II 350GB HDD.
Assuming I have configured the on-board hardware RAID controller to group the two disk as...
Rookie Linux user here! I am trying to install Fedora 10 on a COMPAQ Proliant DL 380 server that has the Intergraded Smart Array Controller with four 18.2 GB 10K hard drives.
I have all of...
Have installed Mandriva Free 2007 2 times with the same result, even though I changed the graphic card and network card.
Everything goes fine with the installation until I am asked to reboot ...
I am attempting to set up a server using Fedora Core 6. I am using a Biostar P4M800 Pro-M7 motherboard with a VT8237R Plus raid controller. I have two sata hard drives in the raid. I have d...
I just setup RH ES4.0 QU4, but during boot process smartd shows status as failed. How can I fix it.
Hello, i just buy a netnook accer aspire one, this one comes with
limpus linux,,, i am trying to install skype, but i dont find how can i do this.
How I can install the GUI version of CentOs 5 without affecting the trixbox installation?
hi I have installed the trixbox v 2.6 and it comes with CentOs 5, kernel v 2.6. and Asterisk v1.4....
I've tried the latest debian and ubuntu installations. I can't get in to GNOME or KDE. I keep getting a "no screens found" error when i run "startx".
I am using two ATI FireGL v5600 graph...
I am working with Fedora 7 and Samba 3, attempting to authenticate Windows users through Samba for logging users in Squid.
I ran through the walk-through at http://mkeadle.org/?p=13 until t...
Hi,
I have the following problem: I have linux configured to allow dial-in on ttyS0. I use mgetty and pppd.
For ppp no problem
However in case of a telnet session (I use Windows hyper...
I am experiencing great problems setting up a Liunx Software Raid 5 system.
My motherboard is a ASRock K10N78-1394 which has 6 SATA connectors. I have set them to work in AHCI mode.
My dis...
I am trying to install curlftpfs-0.9 on Fedora Core 4. When I run ./configure I am told that glib-2.0 is required but not found. Should I do a "yum install glib-2.0" or will I screw other thin...
I need to be able to use the XSLT Extentions that comes with Dreamweaver 8 but my tests to proccess XSLT fail.
You can check this link for an example:
http://www.travelht.com/carnival/xslt...
Hi,
I had recently downloaded Ubuntu and installed it on a USB thumb drive. Works very well. Anyways,
my question is "...can linux be installed into the preboot environment that is accesse...
I have downloaded and installed SOAP_API that Tim wrote and posted on ORACLE-BASE. I have followed all of his examples code using the SOAP_API code set. I have created code that uses the SOAP_...
I'm trying to run a ruby script on Linux (Linux server running SuSE Linux Entreprise Server 10). I get a message that a library readline cannot be found:
epf:/home/user/epf.eclipse.org/curr...
