2008R2 BUGCODE_USB_DRIVER USBPORT.SYS USBOHCI.SYS BSOD
This server just started crashing with this error. Bluescreen view says its usbport.sys or usbohci.sys.
I updated the chipset drivers and it didnt help. Can we just replace the driver files with updated versions or are we going in the wrong direction?
I updated the chipset drivers and it didnt help. Can we just replace the driver files with updated versions or are we going in the wrong direction?
ASKER
Attached.
What do you use for dump analysis?
052012-34554-01.dmp
052012-37440-01.dmp
052112-33259-01.dmp
What do you use for dump analysis?
052012-34554-01.dmp
052012-37440-01.dmp
052112-33259-01.dmp
I need the latest minidump files.
The dmp files you have uploaded seem to be of 2012
052112-33259-01
052112- 05 stands for month 21 day and 12 for year.
I use windows debugger.
Ded9
The dmp files you have uploaded seem to be of 2012
052112-33259-01
052112- 05 stands for month 21 day and 12 for year.
I use windows debugger.
Ded9
ASKER
You are right, it was sorted the wrong way.
100113-12979-01.dmp
100213-13182-01.dmp
100213-77314-01.dmp
100113-12979-01.dmp
100213-13182-01.dmp
100213-77314-01.dmp
Not much info in the dmp file.
You can enable verifier and upload the latest dmp or install latest bios update to resolve the issue.
Enable driver verifier
1) Open an elevated command prompt
2) Type "verifier /standard /all" (no quotes)
3) Reboot your machine
4) Use machine again until it crashes
After the crash & reboot, go into safe mode with networking or normal mode.
Disable driver verifier
1) Open an elevated command prompt
2) Type "verifier /reset" (no quotes)
3) Reboot your machine
Upload the new dmp file
Ded9
You can enable verifier and upload the latest dmp or install latest bios update to resolve the issue.
Enable driver verifier
1) Open an elevated command prompt
2) Type "verifier /standard /all" (no quotes)
3) Reboot your machine
4) Use machine again until it crashes
After the crash & reboot, go into safe mode with networking or normal mode.
Disable driver verifier
1) Open an elevated command prompt
2) Type "verifier /reset" (no quotes)
3) Reboot your machine
Upload the new dmp file
Ded9
ASKER
I turned on verifier and it ran for 6 hours with no crash. It seems to crash once 20 hours or so.
I will let it run, update the bios, and see what we have.
I will let it run, update the bios, and see what we have.
ASKER
New crash new dump
100213-18501-01.dmp
100213-18501-01.dmp
You can disable the driver verifer.
Again ..not much info in the dmp file.
1. Run test on memory and hard drive. Can be a failing raid controller.Install latest drivers for raid. (MEGASAS RAID Controller Driver )
2. Can be smps issue. Check whether RAM is getting enough power.
3. Make sure overclocking is disabled in bios.
4. Check the driver version for usb devices in device manager.
Last option is clean install.
Ded9
Again ..not much info in the dmp file.
1. Run test on memory and hard drive. Can be a failing raid controller.Install latest drivers for raid. (MEGASAS RAID Controller Driver )
2. Can be smps issue. Check whether RAM is getting enough power.
3. Make sure overclocking is disabled in bios.
4. Check the driver version for usb devices in device manager.
Last option is clean install.
Ded9
ASKER
How do we know if the usb drivers are out of date?
We installed the latest chipset drivers from intel. This is an S1200BT mainboard.
We installed the latest chipset drivers from intel. This is an S1200BT mainboard.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
None are yellow, and I can check the date. But a data of 12.9.12 doesnt mean it is out of date.
Besides installing the MB drivers from intel, how do you know if there is a newer USB driver?
We already disabled verifier.
If we disable the onboard USB all together, will it cause a problem? We can also installed a PCI USb card if we need to.
Besides installing the MB drivers from intel, how do you know if there is a newer USB driver?
We already disabled verifier.
If we disable the onboard USB all together, will it cause a problem? We can also installed a PCI USb card if we need to.
ASKER
I think we did that days ago but I will run it again just in case.
Post the make and model number of your system.
You can get it by running cpuz
http://www.cpuid.com/softwares/cpu-z.html
You can get it by running cpuz
http://www.cpuid.com/softwares/cpu-z.html
ASKER
Intel S1200BLT mainboard
Is this a custom build system or a dell, hp etc.
ASKER
I've requested that this question be closed as follows:
Accepted answer: 0 points for kassant7's comment #a39541077
for the following reason:
Driver was out of date. The intel installer did not update the driver so we had to do it manually.
Accepted answer: 0 points for kassant7's comment #a39541077
for the following reason:
Driver was out of date. The intel installer did not update the driver so we had to do it manually.
ASKER
How do I fix the points? It shouldnt be 0.
Upload the last three minidump
Ded9