Hot Solutions

We've got a Client Access/Hub Transport Server running Exchange 2010 SP1 in our organization since March 2011. Since the last week, we have been experiencing huge delay in email send/receive over Outlook as well as OWA and activesync. Most sent...

OVERVIEW
Have Exchange 2010 setup and running.
Activesync is functioning properly
Have Samsung Galaxy 2 Android based phone
Activesync is working, I can confirm connection to server.
Contacts are syncing
Outlook to phone calendar...

I started receiving this error message a week or two ago. Not sure if this is the result of a new MS patch or not. Google search online did not reveal any solution or lead. Any ideas folks?

Service Details:
Event Log Module Status: 0
The...

Service Details:
Event Log Module Status: 0
The Last Record Number of the eventlog type that current event entry belongs to: 0
# of duplicate events: 1
Source: MSExchangeIS
Category: General
Event ID: 10028
User (If Applicable): N/A...

I have  a Driod 3 that has been working with my SBS 2008 (Exchange 2007) for several weeks. This morning I had to reboot the server to install MS office updates. Now my Droid will not sync. When the Droid trys to sync it gets "accout error" if I...

I can't configure my Exchange 2010 account via ActiveSync on my Android 2.3.6 smartphone. It is initialy recognized but in Exchange don't appear the cellular configuration anche the Sync doesn't start.

Other users of the same domain can be...

I am having this error repeatedly on my Windows 2008 R2 server running Exchange 2010 SP1 RU6.

 Event Type:      Error
Event Source:      MSExchange Common
Event Category:      General
Event ID:      4999
Date:            2/15/2012
Time:            7:49:46 AM
User:            N/A...

Hi,

i have the same error now the second time with same server-product:

Its pre-installed SBS 2011 with new Hardware. The Servers run fine. After configuring network and Server-Name, installing all updates, i started the sbssetup.exe to...

I have one Exchange server installed with Microsoft Exchange server 2003 Service pack 2 [ Build 7638.2].  I have setup this server about 9 month ago and it works well with outlook users.

Most of time it's working fine with IPHONE users, but...

Hi Experts, we had recently deployed patches to one of our Exchange 2010 SP1 mailbox servers, which is part of a DAG. Now, the database copies on the patched server won't mount. Below are the patches that were deployed immediately before the...

I have the following message logged in my MAC Outlook 2011, any idea ?

Error:
Could not synchronize record: FREE to Exchange server

Detail
The folder save operation failed due to invalid property values

Error Code : -19918

Any idea...

Hello,

We have an Exchange 2010 SP2 Rollup 1 server running on 2008 R2 which isn't letting us search using Microsoft OWA.  We keep getting the error "The action couldn't be completed, please try again".

In PShell I have run:...

Hi Guys,

Can you please give me some ideas on how to fix this problem?

In our company we have SBS 2008 server. I configured Outlook AnyWhere and ended up with a lot of frustrated branch users. They constantly experience disconnections from...

Environment-
Windows SBS 2008
Exchange Server 2007 - Version 08.01.0436
BES Express 5.0.3(Bundle 12)
-------------------------------------------------------------------------------
- Blackberry Mail store service failed to start with error...

Hi,

We keep getting Process

Microsoft.Exchange.InfoWorker.Common.Delayed`1[System.String]: Unable to find any replicas for free/busy folder EX:/o=Exchange Org/ou=Name.

Anything i searched it relates to co-existense between exch2003 and...

I have a newly configured Exchange 2010 server.  Everything is working properly with the exception of Autodiscover (which I don't care about--pretty sure it's not working because I have a single-site SSL certificate for mail.domain.com which...

Hello Experts, requesting for your critique of our high-level Exchange 2010 SP2 and UR1 deployment procedure. We have tailored our deployment plan based on existing internet resources and will be happy to receive comments from you regarding...

I have 6 current users mailboxes move them selves to the "Disconnected Mailbox" screen, but they are still in the "Mailbox" section. These users are unable to use Outlook. I can change settings in there properties, but I cannot send them any...

Hi, can someone help me upload my 20GB .PST file to my Office 365 mailbox
"cloud" through remote Powershell.
 
I have tried importing this 20GB PST to my Office 365 mailbox through my Outlook client but it just stops for some reason so I...

I have a client that wants the forced policy removed from the exchange server that applies to smart phones.
anyone know a quick link to the instructions?  at the moment I don't want to read a big document explaining how to understand the whole...

Hi guys,

i have a windows 2008 r2 sp1 standard edition server with 24gb ram running exchange 2010 sp2 w/RU1 about 33 mailboxes, single server.

all search functionality seems broken.  I have rebuilt the index, by deleting the files and...

I am on Exchange 2007 SP3 Rollup 5 and want to upgrade to 6 on my test server.

The process I followed was:
1. Turned off the AV services.
2. Changed the perms on  RelNotes.htm
3. Ran the Rollup.

After the first Next prompt and a few...

Hi Folks,

I have already publishing the OWA with TMG and working ok  but the Outlook Anywhere using the TMG is not working. I created one rule only for the Outlook Anywhere with the setting below. The listener and the CAS Farm are the same...

I have an iPad with IOS 5.1 on it.  I have configured Mail to work with an exchange server and when I got to verify the account settings everything works fine.  However, when I go into the Mail app the email never downloads and eventually I get...

Using Exchange 2010 am getting this error when making any change via the EMC:

Log Name: Application
Source: MSExchange Management Application
Date: 10/08/2011 15:20:57
Event ID: 5000
Task Category: AdminAuditLog
Level: Error ...

Just finished setting up the 2011SBS server, converted over from 2003 Standard and 2003 ExchangeSP2.
Internal and outbound mail work fine. outbound to inbound does not work.
I went through the troubleshooter and it did send an email to an...

I have been emailing my wife to her cell phone successfully until the other day...now when I attempt to email her I get the below response...I use Outlook 2010 and Exchange 2010...any solutions?...


From: Microsoft Outlook...

Exchange 2010 SP1 servers were patched 1/13 for December/January security patches and were upgraded from SP1 rollup 4 to SP1 rollup 6.  So all of these are possible causes.

Ran with no issues reported until 1/25 (although the problem could...

I am looking to add to a powershell script that will check if the user exists. If not then run this script. I just would like to plug that extra part right in. Here is the script.

add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010,...

I configured a backup internet line as a failover for the primary Internet line; we use Postini for receiving as well as Postini smart host for sending out. When I try to setup the Outbound and the reinjection host in Positini for the backup...

I recently moved a public folder to a shared mail box so I could enable exchange 2010 archiving. The public folder was huge and I forgot to turn off the default mail box limits, when I came back to work in the morning the public folder was all...

I need to enable 200 users in Lync 2010 using a csv file formatted as such:

Name,Pool, Sip Address
joeSmith,lyncPool@contoso.com,sip:joeSmith@contoso.com

Please assist.

thank you!

I have an exchange 2010 sp1 setup, OWA web app was working all time, it suddently stopped working on internet explorer only(it works with firefox, safari...) for all users. when I try to login to OWA using IE , I get on the site where it shows...

I have dployed SBS 2011 Standard for a customer. But they now do not want to bring their mail in house. And would like to use their existing POP service with the ISP, and their Outlook to remained configured as is.

With SBS 2011 when you open...

Hi Experts,

I have a system set up:

FrontEnd
1 SQL backend
1 FE Lync Server - 172.16.0.10


Edge:
1 Edge Lync Server - 2 Subnets

172.16.1.10 - Edge Internet NIC
-
172.16.2.50 - Access Edge IP
172.16.2.51 - WebConf IP...

We have recently installed a new Windows SBS 2011 Server and have configured all the Exchange Mail Boxes in conjunction with the users setup. The mail is collected from my POP3/SMTP mail hosting company using the POP3 Connector.

I no longer...

Hello,
I keep receiving the following error when attempting to upgrade from Exchange Server 2010 SP1 to SP2:

Entry DN: CN=ms-Exch-ELC-Expiry-Action,CN=Schema,CN=Configuration,DC=,DC=local
Add error on entry starting on line 1: Operations...

Hi There!

We have a customer who replaced her older iPhone with this new 4S. The old phone was working perfectly for all content to sync from her exchange account in both directions.

This phone everything works except only 1 direction...

Hi I just did upgrade of Exchange 2007 to sp3 - on the CAS and mailbox servers. The CAS is on a different hardware box than mailbox server. i was hoping sp3 would fix problem - it didnt

both run win2003 x64 sp2 - and have the dst wa timezone...

I just swapped out an SBS2003 for an SBS2011.  So far everything is smooth except for setting up their Ricoh scan to email.

Do I have to enable something on Exchange 2010 to allow access from the scanner?

I have updated the server and smtp...

Hello All -

Yesterday, I performed a migration from SBS 2003 to SBS 2011.  This included AD, DNS, Exchange, and a few other things.

There was a small hiccup during the migration process where it went to desktop and showed a help file for...

We have our own Exchange Server (2010) installed on an Windows Small Business Server (2011).
This server used to be in our office, and everything worked fine. The server has been moved a few months ago to our datacenter and now we are having...

I'm hoping somebody can help me with this intermittent issue we're having with some folks running Outlook 2007.  Occasionally the application will crash.  There's no rhyme or reason to it except it seems to happen when you click the send button...

Hi,

I've enabled some services from a purchased  GoDaddy SSL certificate in Exchange 2007, then imported that certificate in ISA 2004 SP3, then publish a Web Mail Web server then created my Weblistener after importing the Exchange Certificate...

We are moving from BES (Blackberry Enterprise Server) and blackberry phones all together and will be allowing Android, iOS and Windows mobile smartphones. Currently we are on Exchange 2007 SP1 but will be moving to 2010 in a few months. Can...

We are trying to email some of our customers and after a long period of time we get an email from OUR exchange server that says Delivery is delayed to these recipients or groups.  

We host our our Exchange 2010 server.  About a week ago we...

For some reason outlook clients configured for rpc/http are getting prompted for their password. What am I missing?

The RPC/HTTP test failed.
       
      Test Steps
       
      Attempting to resolve the host name mail.schulershook.com in DNS.
       The host...

Dear All,

I have exchange server Edge 2010 SP1. I have configure some sent connector.

I have one Sent connector i.e abc for sending to the specific domain i.e gmail.com so all email that sent to gmail will through send connector abc. Other...

is there a way to make a shortcut and set it to run as different user by default - instead of having to (shift right click , select run as different user , and type in administrator user and password)
?

Thanks

For just one user any scanned documents from the printer would go to junk folder.Till now I have disabled junk filter on the outlook 2010.
Ran the below powershell command on exchange 2010 server
set-mailbox user -AntispamBypassEnabled $false
...

Hi there,
I am trying to write a powershell script to basically re-point mailbox databases CAS Array's to another site's CAS Array.

I have 2 sites, each site has a Client Access Server (Array). SitaA Array and SiteB Array
Basically when we...

I have a client with multiple Undeliverable since Friday. They are able to send most emails out, it is just a few different emails they are trying to send to and I think it would be a coincidence that all of them are having issues. Can someone...

Hi,
I have several accounts from the same domain in which I can set up an exchange email account on the iPhone. One account in particular will not work anymore even if I delete and re add it.
Im wondering if there is a size restriction on the...

Our full Exchange 2007 SP3 backup is starting to fail with this error:

Final error: 0xe000037b - Using the job settings, Backup Exec attempted to back up the passive copy of the Exchange database. However, the passive copy was not available...

Hello,

I have a CSV file containing entries I would like to add to an Exchange Distribution List using Powershell. I have learned how to create a distribution list using Powershell, but still not sure how to add a list of entries into the...

I have some users who state that under Outlook 2007 they were able to receive meeting request in calendars and select "no response required". What this would do is allow this to stay in they're calendar but not remove this.

We moved to Outlook...

I have two exchange 2010 server across two datacenters in the same AD domain. I already have installed SP2 on one of the exchange server at datacenter1 which then update schema. I used this command to do this:

SETUP /m:upgrade...

Hi Guys,

Is there a way to Disable Base64 Encoding for a Specific Mailbox/Contact on Exchange 2010?

We're having issues with our Managed Services Software whereby we've narrowed it down so that emails sent from the application are being...

I have 1 user who gets an immediate NDR in Outlook 2010 when sending to a specific external email address: The NDR message is:  "The following recipient(s) cannot be reached: (email address) - None of your e-mail accounts could send to this...

We have an exchange 2007 environment and have 1 user using outlook 2010. When this user received emails from certain users their outlook crashes. If i look at the error that is generated i see

AppName: outlook.exe  AppVer: 14.0.6025.1000...

I have a small network with a Microsoft Small Business server 2008 standard (not Hyper-V)
I only have 6 PC's two running Windows XP Pro 32bit.
All running Office 2010.

My problem is that on all the pc's Outlook kinda disconnects from...

Recently switched to GRT backups of Exchange 2010 and the speed of the backup went from:

1:45 minutes @ 1,450 mb/min with 100 - 110 gigs of data

To

7:15 minutes @ 273 mb/min with 100 - 110 gigs of data

Exchange version is 14.0722.000...

Hi,

We are running up-to-date Exchange 2010 Server with Outlook 2010 clients through rpc/https.

We have a shared mailbox (with online archive), users have full access and send-as permissions on this mailbox. It works fine except for the...

Is there an automated software to import holidays into all my Outlook 2010 users Calendars? Why have an Outlook 2010 environment and Exchange 2010

Hi all,

I have a client with SBS2003 fully patched with Exchange SP3, we have a mixture of iPhone 3s and 4s, when setting up for Exchange all verify the account but get error Cannot Get Mail, The connection to the server failed.

I have...

I'm having trouble sending emails from my on-premises exchange server to a cloud based user.  Messages are being sent from my Exchange 2003 server and are getting stuck on the Exchange 2010 hybrid server with the Hub Transport Role installed. ...

Hello Experts,

I am having a problem of Outlook locking up for couple of users within our company.  We have a Terminal server to which all 14 users connect and are able to access their Outlook and Network Drives.

The problem is only...

Hi Team,

I am using Lync 2010 and i need to know how to export/Import the local contacts in one of the user..

I need to re-enable this user account.. so before deleting this account in the lync server i need to export the local contacts in...

Hi,

We just implemented Room Finder where we created Room List for our users but whenever we create meeting we cannot see the available rooms.  The suggested times is reporting a message indicated in the title of this inquiry.

We can...

Hi,

I'm was trying to upgrade Exchange 2010 from SBS 2011 Standard to Exchange 2010 SP1 but the upgrade didn't complete due to the below error message:


Hub Transport Role
Failed

Error:
The following error was generated when...

Enable-CsUser : ConstraintViolationNoLeadingOrTrailingWhitespace
At C:\EnableLync.ps1:3 char:15

Here is what I'm using:

Name,Pool, SipAddress
joeSmith,lyncPool.contoso.com,sip:joeSmith@contoso.com


Here is the script

$users =...

Hi,

I am currently running into a problem where I'm unable to restore from tape using Backup Exec 2010 R3. I searched high and low and looked through almost all articles and unable to find a solution to my problem.

SERVER:
Windows 2008...

Greetings

I've had a user report that th signature section in OWA is greyed out. I'ved logged into their account to confirm this. I've loged into mine as well ans it's also greyed out.

Generally everyone uses Outlook (installed on their...

Ok so I'm a VBScript guy and never learned .NET so that being said what I'm trying to do is connect to a particular mailbox and download attachments from any email in the inbox.  I've made some real good progress with the Exchange Web Services...

When outside senders send emails with attachments over 10mb, they get the following NDR:
 5.3.4 Message size exceeds fixed maximum (state 18)

I went into exchange management console, hub transport, global settings, right click on transport...

We've configured an FG110C in Interface Mode (not Switch Mode). We had to do this because we have 4 internet providers - one is a T1, 3 are DSL that we want to load balance with.

The T1 and the DSL's are used for completely different things....

The two copiers enabled with scanning ability has been working fine with our Exchange 2003 servers allowing users to scan documents and email it to themselves.
All users information is in the copier and the copier is setup to use one email...

I'm getting ready to migrate to Exchange 2010 from 2003.  I have several virtual machines setup to test the installation.

I have a default install of Exchange 2003.  I have a CAS, HT, and Mailbox servers.  After the install all message are...

Hi I'm looking for a powershell script that will return a list of AD contacts that do not have a exchange contact any help would be great

thanks

Hello,

I'm planning to upgrade memory (RAM) on Exchange Server 2010 running on two ESX hosts. I'm looking for directions to put some part of servers in maintenance mode while the second host handle traffic.

Here is the existing setup:
...

I just migrated Exchange 2003 to 2010. Do I need anything setup to get a samsung stratosphere connected? I found this setup help: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=48388

Do I need to enable active sync on...

Hello,

I want to convert my physical exchange server 2010 SP1 to virtual ESX5i using VMware Converter .

Please I need best practice  to accomplish it and if feasible to do it while the exchange is online

We are getting this error message with only one domain.  davisware.com  I have no idea what else to check.  any help would be great.

Identity: HBEXCH2\499170\79271
Subject: FW: RE: Las Vegas
Internet Message ID:...

Hi Experts,

I have 8 Exchange servers in total.

4 in Site A
4 in Site B

Each site consists of:

2 HUB/CAS
2 Mailbox servers in a DAG

I have a CAS Array for the live site.

Cas name:

CAS_ARRAY_LN
Site: London
FQDN:...

Hi

Moving from 1 database to another, with the Discovery Mailbox being the last one to go over.

Error:

DiscoverySearchMailbox... DiscoverySearchMa... wales            50 GB (53,687,091,200 bytes)
WARNING: The object...

having an issue connecting clients to POP3 from our exchange server.

I have started the POP3 Service, set to automatic, I can telnet my servername on port 110 and get the "+OK The Microsoft Exchange POP3 service is ready." message, mailboxes...

Transitioned from Exchange 2003 to Exchange 2010, and noticing high memory usage and multiple processes running taking up a lot of memory.  Is any of this an issue, or to be concerned about?  It's a single Exchange 2010 server with SP2...

We have one TMG server, which has a wildcard certificate installed; this is the main certificate for all our SSL services and used by the following web listeners:
1. Exchange Forms Based Authentication
2. Exchange integrated
3. SSTP VPN and ...

Hi,

We recently moved a client's Exchange off a Standard SBS 2003 Server to a Hosted Exchange 2010 Server. We did by exporting all mailboxes to PST files, re-creating the accounts in Exchange 2010 (there was only 15) and then re-imported the...

Hello:

We have 1 user that has had the start & End time changed in some of his re-occurring appointments, after daylight savings time?  Again, not all of his re-occurring appointments; but some.

For example, this 1 user has a re-occurring...

We have a number of meeting room's and other equipment (cars, Projectors etc) that I have created a Room or Equipment mailbox for in Exchange2010.  I have added these to outlook2010 on a few test computers to make sure all is working.  I now need...

Hello,

We have an Exchange Server 2003 and a user who has an iPhone.  When AT&T transferred her contacts to her new iPhone, they did not link it to her Exchange account, causing all contacts she imported & all contacts she entered to be stored...

Hi Experts,
Im trying to move my on-premises exchange 2003 on windows server 2003 SP3 to the cloud with Exchange Online on Office 365, and Im trying to Test my connection RPC over HTTP and I get this error.

Attempting to ping RPC endpoint...

I have migrated from an old server running Exchange 2003 to a new server running Exchange 2010.

My Outlook 2003 clients are able to download the OAB fine, but my Outlook 2007 clients get an error 0x80200049 when trying to download the OAB.
...

I am not sure whats happened, but all of a sudden all our outlook clients (mix of 2007 and 2010 on exchange 2007, sbs 2008) have started asking for a password constantly. the 2007 clients wont even accept it once its in, whereas the 2010 clients...

I am trying to install Exchange 2010 onto a server in a child domain with an empty root domain. The child domain has Exchange 2003 running currently. I have run the Schema update commands.
setup /pl:child.domain.fqdn
setup /ps
setup /p...

Suddenly external email to our company stopped reaching our building, while internal email continues to function.

We have a Sonicwall which directs the email to a Barracuda Spam filter, which sends it to our Exchange 2010 Server. There is no...

Hi,

I have a Terminal Server environment where 4-5 clients are working.

Did somebody set up such a thing like 2 exchange account in the same outlook profile?


Thanks.