I need help in configuring SBS 2003 with two nics and PIX 501.
Current Setup:
Internet -> Ethernet Modem -> PIX 501 -> Switch -> Servers and Clients
Modem
IP address 192.168.1.1
Setup in bridged mode
PIX 501
I have configured the pix as follows:
The Inside interface IP address to be 192.168.50.1
The outside IP address is set to DHCP
Server
On the SBS 2003 I have configured one nic card with:
IP Address: 192.168.50.2
Subnet: 255.255.255.0
Default gateway: 192.168.50.1
Preffered DNS : 192.168.50.2
Which is connected to the local LAN Switch
1) What should settings should I use on the second NIC card?
2) Where should I connect the second nic card?
3) Do I need to have a second NIC card?
4) What is the purpose of two nics cards?
Nazmul
Start Free Trial