I have a PC and trying to install Window XP on that PC. The PC has the following Harddisk parameters
LBA, ATA 133, 80 GB. RAM is 256 MB and processor PIV.
When I boot from CD...( by pressing a key to boot from CD...), I find that after sometime this msg appers...(BLUE SCREEN)
A problem has been detected and windows has been shutdown to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
Disable or remove newly installled hardware or software.
Disable BIOS memory options such as Chaching or shadowing
Technical Information
***STOP: 0x0000000A (0x0A0D001B, 0x00000002, 0x00000000, 0x8081c63c)
Somewhere on the experts-exchange site, I found the related help, that is the following:
An attempt was made to touch pageable memory at a process internal
request level (IRQL) that is too high. This error is usually caused by
drivers using improper addresses. If the kernel debugger is available,
get a stack back trace.
Parameters:
1 - Memory referenced
2 - IRQL
3 - Value: 0 = read operation, 1 = write operation
4 - Address that referenced memory
I am not getting, What is this kernal debugger ? and from where I can find it. And how can I instruct drivers to use proper addresses ?
Your help is needed...
Hemant
Start Free Trial
