I get the following error when i install one of my favourite software
InstallShield Wizard
Setup has experienced an error.
Please do the following:
- Close any running applications
- Em...
I want to install Windows NT on a PC using a dual boot with Windows 98. The Windows 98 logical drive is using FAT32, and I want Windows NT to be able to access the data files on this logical d...
What does the following mean:
RegIni: CreateKey() relative to handle (0) failed - 161
RegIni: failed to load from file "c:\registtry\runonce.ini" 161
Where can I find a decent manual for Reg...
I'm trying to install a NT 4.0 Server from a CD-ROM. During the file copy operation it goes so well, but after it does the first boot, I get the message "The file cdrom.sys is corrupted. Setup...
Greetings,
I have a Compaq proliant server MT350 running NT 4.0. I have an adaptec controller with two mirrored (Supposed to be)SCSI drives. It took forever to find the startup disks and t...
What are the parameters to setup the sp3 unattended.
I thought PStools worked on all versions of windows, but when I run any of the PS tools on my 64bit windows install nothing happens.
For example if I run PSservice on the command line it j...
One of my clients is a medium-sized steel manufacturer, with several industrial lasers for cutting and shaping. These machines are all Windows NT4 boxes running specialized software.
Recentl...
Can I install something on my standard NT 4.0 Server that will provide a Terminal Server service for me to connect to in administration mode.
I only want to be able to remotely access the box...
I have setup 2 standalone NT servers.
I add them to the domain from the network properties page of the respective servers. Using create a computer account in the domain.
It says welcome to d...
Are there any utilities which will examine and/or copy files on an NTFS partition while booted up in DOS?
I currently have two NICs on my server, both going in to the main switch. I DO NOT want load balancing as i'm using VMWare and have a Virtual Server running dedicated through one NIC and the o...
Hi Guy´s, Newbie from Denmark joining in as I have found many good answers to earlier problems, but now I really need help...
I´m getting pretty close to desperat soon, my problem is as fol...
Hello, I have a Dell PowerEdge 2400 server with win2000 loaded. It had been running fine for a number years. Today I found that Windows was not accessible. After rebooting I get the "primar...
Need a solution for the following stop message
stop: 0x0000000a (0xe2390000, 0x00000002, 0x00000000, 0x8010922d) IRQL_NOT_LESS_OR_EQUAL*** address 8010922d has base at 80100000 - ntoskrnl.e...
I have a laptop from Wedge Technologies (Pentium 133 MHz, PCI bus) with a VADEM VG 469 PCMCIA Controller Card. I have tried to install two different PC Cards without success. These cards are...
I'm trying to install NT 4 on a seagate HDD, and it is FAT 16. Setup will not recognize the drive, and I am wondering if there is a program which will format a hard drive to ntfs in DOS or by ...
I have a printer server on one domain and would like to share the printers with systems on another domain. I've found two ways to do it, but both are cumbersome. One is to map a drive from th...
OK, I have the following machine:
Tyan Tomcat I board w/ 150+ Cyrix
40 MB SIMM
NEC 4x4 CD ROM
Seagate IDE Drive
- single partition (tried FAT and NTFS)
I am able to load NT 4.0 WS well u...
Is there any way of disabling the lock workstation button on NT4 SP5? We are using Novell IntranetWare Client 4.11b, and do not have Zen running - the client also bypasses the NT login, using...
I'm attempting to do an unattended install across the network. I've placed the cmdlines.txt file and a sp1 (service pak 1) direcory under the $oem$ directory. The cmdlines.txt reads as follo...
I am setting up a new computer and have previously had a dual boot machine: 95/NT, since some drivers have not yet been written for NT.
What are the pros and cons of FAT vs. NTFS? I know tha...
Hi
This comes up when I am trying to Install WinNT 4.0 Server.
-------
STOP: 0*0000007B (0*F9013bd4,0*c0000034,0*00000000,0*00000000
INACCESSIBLE_BOOT_DEVICE
CPUID:AuthenticAMD 5.8.0 irg1:0 S...
What is the optimal size for an NTFS partition, or does it matter?
On Windows NT 4.0: We have 3 NIC cards. We are currently using 2 of the cards. The 3rd adapter does not yet have an IP address assigned. When I look in Control Panel- Network-Adapters, ...
