I am setting up a new computer and have previously had a dual boot machine: 95/NT, since some drivers have not yet been written for NT.
What are the pros and cons of FAT vs. NTFS? I know tha...
I have an old NT4 server that I am trying to keep alive with some spare parts.
Had 2 - 3 GB SCSI drives on a bootable adaptec 2940 card, and one of the disks died.
Luckily it was mirrored (s...
I dont have a lot of exposure to NT4, its mainly 2000 and 2003 but I need to understand how a NT4 server works because a company still uses NT and are moving to 2003 but not yet.
A NT4 doma...
On Windows NT 4.0: We have 3 NIC cards. We are currently using 2 of the cards. The 3rd adapter does not yet have an IP address assigned. When I look in Control Panel- Network-Adapters, ...
Hi Experts,
Two queries:
1) Suppose i have a Windows NT PDC and BDC in my organization. And the PDC goes down for some reason. Would the BDC serve to authenticate users. Or is it that i ...
How do I add a LPR printer port if the port type is not available? I tried to add a new 'monitor', selected \I386\monitor.inf but no LPR port.
I am trying to do a new NT 4.0 Server install on some new equipment for backup/recovery testing and migration to 2003 Server.
I have the NT server CD in the drive and I get the following blue...
I am running out of space on my hard drive and I want to upgrade from sp3 to sp4. what is the use of the I386 directory? Can I delete the files there or does NT use these files from time to ti...
I have an NT program which performs file manipulation. I am running a program on Digital UNIX (Dec Alpha) and require that this NT program be kicked off by the Digital Unix program and can no...
I need to free up some disk space on the system partition of my NT40 BDC. How can I safely remove the backup files/folders that were created when doing a hotfix/service pack installation? Th...
When starting NT 4 (SP 3) I get the following error box:
"The Protected Storage service terminated with service-specific error 2148270091. "
What is this?
When I try to start it manually in th...
After installing the standalone NT4 workstation, the Event Viewer show the following:
Failed to upgrade printer settings. LocalOnly driver C:\WINNT\System32\spool\DRIVERS\W32X86\2\RASDDUI.DLL...
I'm trying to re-install NT-4 Server and I'm having trouble removing SP3. I go through the remove procedure and am told it is removed but when I re boot I see service pack 3 still installed. I...
How I can change (increase) a "Maximum allowed users" to share directory (or drive) on my NT 4.0 Workstation ?
When I set "Alow 99 Users", system dropped a number 99 to 10...
Hi,
I've tried to install Win NT server version.
This is the setup :
My system : 8500TVX pentium motherboard
: Cyrix P-166+ processor
: 2.5 Gbit HD (quantum bigfoot)
...
NT Workstation 4 install (after reformatting the HD) hangs at the driver loading stage with this message:
TRAP 0000000E PAGE FAULT
At linear address 512C0B84
tr=0028 cr0=80000011...
I have a win 2000 machine that won't boot; it dies after the Win logo screen. The technician wants me to create a UBCD iso so he can remotely examine the machine. I downloaded ubcd411.zip, ex...
I just bought a 10.2 gigabyte IDE drive to replace the 6.4 gig drive in my existing NT4 workstation.
I jumpered the drive to be a slave and put it in my existing system where I set up a singl...
Somehow our PPP control protocols are not properly set up in NT 4, Small Business Server, SP 4. Dial-up networking can properly access our ISP to the point of verifying the password, but err...
hello,
I have a maxtor 30 gig drive. I want to configure it to dual boot nt server and 98. This was easily done on my quantum fireball 2.6 gig. Usually i would do all partitioning with f...
How to change windows cursor shape (cursor that appeare in Ms word,Notepad,nb. vertical line,not mouse cursor!).
What is the last good known configuration? It is supposed to be that configuration that was valid directly before I made any changes.
But when I press the space bar during the boot sequence ...
DURING THE INSTALLATION OF NT 4.0 ARISE THE FOLLOWING ERROR WITH THE FULL PAGE COLORED BLUE:
STOP AT 0X000000A
IRQL_NOT_LESS_OR_EQUAL .....ntoskrnl.exe
IT IS A HP VECTRA 5/133 WITH 32/64 MB R...
I am trying to RAS in using a laptop under NT4 SP5, it dials up connects and authenticates and then comes up with this error message.....'TCP/IP reported error 718:Timed out waiting for a vali...
I have 65 servers (WinNT and Win2K) that have various different locale/language settings. This is affecting the use of a central management program that relies on a consistent date format. I n...
