September 5, 2008 12:40am pdt

Member Login

Hall of Fame

Yearly

1rindi 49,184
2and235... 47,321
3KCTS 45,969
4oBdA 41,150
5LeeTutor 36,004
6scrathcyboy 34,900
7MASQUE... 33,536
8PUNKY 33,207
9SysExpert 30,084
10johnb6767 27,680
11nobus 26,445
12Merete 25,584
13tigermatt 23,280
14flubbster 21,271
15leew 20,359
16michko 19,802
17mass2612 17,322
18war1 17,225
19TechSoEasy 17,125
20Shift-3 16,164
21briancassin 15,987
22slam69 15,622
23garycase 13,475
24arnold 12,950
25merowinger 10,772

	[x] Attachment Details

Boot Windows xp/2k from usb 2.0 hdd

Zones: Operating Systems Miscellaneous, Windows Tablet

Tags: usb, boot, windows, from, hdd

Hello,

I tried to install Windows XP on a external usb hdd. The first part of installation (copy files form cd,...) was ok.
After that, when windows try to boot first time from usb hdd, in the loading drivers process, a blue screen appears, with error 7b.

What should i do to boot windows from the external usb hdd.
I'm using a laptop Acer Travelmate 662LCi as host.
If necessary i can use windows 2000 insted of xp.

Thank you,
sey.

Start your free trial to view this solution

[x]

The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

The Grade of the Solution
The Zone Rank of the Expert Providing the Solution
The Number of Author and Expert Comments
The Number of Experts Contributing
The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

3.0

Question Stats

Zone: OS

Question Asked By: sey7

Solution Provided By: modulo

Participating Experts: 20

Solution Grade: B

Translate:

Loading Advertisement...

Open Discussion

Comment by fwilkinson

It seems some people disagree with MS...

http://www.usboot.org/tiki-index.php

http://www.scribd.com/doc/13257/Boot-Windows-XP-from-a-USB-flash-drive

Comment by dclive

Folks - this works fine:
http://www.ngine.de/index.jsp?pageid=4176

I'm doing it now (XPSP2) and it works great - fast, no issues, no gotchas.

Summary:

We will dump the contents of your original Windows XP CD , extract a few files from the Image using ISO modification software, edit the files, and put the modified versions back on the ISO. The resulting ISO image is burnt back onto a CD media, and can then directly be used to install Windows on your USB drive.

I am also covering a few pitfalls that happened to me, in hope they will save you a bit of time.

1) Does your computer support booting from USB?

Usually, if its an option in your BIOS boot sequence menu, the answer to this is yes. If its not there, look for BIOS updates. If you are not sure, proceed and see what happens ;-)

2) Sorting out the "Bootability" of your USB-Drive

Connect your USB drive to your computer, directly, without a Hub. Then, shut down your computer, disconnect any other hard disk drives from it, and insert your original Windows XP CD into the drive. Start the installation, and proceed to the section where you are allowed to pick a hard drive. If it goes beyond the partition selection, your drive is already fine for booting Windows XP. If not (seems to be the cases with many of the Freecom USB HDDs for example), you will get an error like "Windows is unable to find your drive, partition, data etc bla". This is usually not a big problem. All you need to do is "properly" format the drive. Reboot into your normal Windows, and get this HP tool , and use it to format your HDD completely. I chose NTFS format, worked fine everytime i tried. After this, my drives are recognized as valid installation devices by the Windows XP installer.
(In fact, i did not manage to create a USB primary partition with FAT32 that was recognized as being installable)

3) Dumping the original Windows CD into an ISO File

Pretty easy one. Simply open WinISO, and select Actions -> Make ISO from CDROM, and save your CD image.

4) Extracting the files we need to work on

After the CD dump is done, close and reopen WinISO. Then, open the ISO file you just created using File -> Open.
Now, click the I386 folder, and select the following files (Ctrl key to multi-select)

* TXTSETUP.SIF
* DOSNET.INF
* USB.IN_
* USBPORT.IN_
* USBSTOR.IN_

Select Actions -> Extract and put the resulting files into some folder to work on them.

5) Unpacking IN_ files

Use the Cab SDK (from the command line) for extracting the contents of the .IN_ files. Each of them contains exactly one .inf file. If you are unsure how to use the Cab SDK, here is an example command line: "cabarc x USBSTOR.IN_" . You should end up with three new files in the folder, called:

* usb.inf
* usbport.inf
* usbstor.inf

You can now delete the .IN_ files.

6) Editing the files

This is the main job. i ll also try to explain a bit whats happening. Use a simple Texteditor like Notepad.

6-A) TXTSETUP.SIF

This file is loaded on the initial install step by the Windows XP CD installer. In this file, we will change the way Windows treats USB devices during system setup -- the default is to only treat them as input devices during installation -- we will change this to include mass storage driver support (which needs to be loaded into the installer much earlier in order to work).

First, move the following entries from [InputDevicesSupport.Load] to the [BootBusExtenders.Load] section , as shown here

[BootBusExtenders.Load]
pci = pci.sys
acpi = acpi.sys
isapnp = isapnp.sys
acpiec = acpiec.sys
ohci1394 = ohci1394.sys
usbehci = usbehci.sys
usbohci = usbohci.sys
usbuhci = usbuhci.sys
usbhub = usbhub.sys
usbstor = usbstor.sys

[InputDevicesSupport.Load]
usbehci = usbehci.sys
usbohci = usbohci.sys
usbuhci = usbuhci.sys
usbhub = usbhub.sys
usbccgp = usbccgp.sys
hidusb = hidusb.sys
serial = serial.sys
serenum = serenum.sys
usbstor = usbstor.sys

... now the same for [BootBusExtenders] and [InputDevicesSupport]

[BootBusExtenders]
pci = "PCI-Bustreiber",files.pci,pci
acpi = "ACPI Plug & Play-Bustreiber",files.acpi,acpi
isapnp = "ISA Plug & Play-Bustreiber",files.isapnp,isapnp
acpiec = "Integrierter ACPI-Controllertreiber",files.none,acpiec
ohci1394 = "IEEE-1394-Bus-OHCI-konformer Anschlusstreiber",files.ohci1394,ohci1394
usbehci = "Erweiterter Hostcontroller",files.usbehci,usbehci
usbohci = "Open Hostcontroller",files.usbohci,usbohci
usbuhci = "Universeller Hostcontroller",files.usbuhci,usbuhci
usbhub = "Standard-USB-Hubtreiber",files.usbhub,usbhub
usbstor = "USB-Speicherklassentreiber",files.usbstor,usbstor

[InputDevicesSupport]
usbehci = "Erweiterter Hostcontroller",files.usbehci,usbehci
usbohci = "Open Hostcontroller",files.usbohci,usbohci
usbuhci = "Universeller Hostcontroller",files.usbuhci,usbuhci
usbhub = "Standard-USB-Hubtreiber",files.usbhub,usbhub
hidusb = "HID-Parser",files.hidusb,hidusb
serial = "Treiber fr seriellen Anschluss",files.none,serial