Top Solutions

Hello I need  a DOS command to use in a batch file to kill a program thats running in windows XP (kill isnt even a recognized command from my command prompt)
THanks
D

Is there any command for deleting a directory and all subdirectories and/or files?

Or does anyone have a good script (*.cmd) file for doing this?

I am using Windows Server 2003... My Server Automatically Restarted, It's showed C:\windows\system32\config\System Folder has been corrected.So, repair the Window OS.. I also Repaired Window OS. Afterward, It's login to my user and restarted.....

Hi,

I am not sure on what are the software utilities available in the market to perform an image or backup of the operating system, OS2. I tried to use ghost but some how or rather this tool is meant for windows operating system.
I would...

Hi guys,

I reinstalled my dell computer using Dell's "Reinstallation CD" and it won't boot in windows after installation.
The CD didn't come with the computer originally; I requested them to send it to me for this particular computer about 2...

I have a problem of installing SGVA driver to all my wkst remotely. As the wkst comes with different display driver chipset (eg Cirrus Logig, s3 etc...), is it possible to check the chipset required thru OS/2 without going to the bios or opening...

What it says on the screen is:
----------------------------------------------------------------------
Caldera DR-DOS 7.03

[DR-DOS] A:\>_
-----------------------------------------------------------------------
iI dont see an R prompt

Hi experts,

while from TL06 to TL10 upgrade , the server is went inactive mode , after that we tried to clear #installp -C  we received a error called .
# installp -C
0503-409 installp: bosboot verification starting...
0503-497 installp: An...

I have a copy of OS/2 ver 2.1 on 3.5 floppy disks. This software is now almost 15 years old.
I want to transfer the installation disks to a CD ROM that will preserve the software. I also want to be able to install from the CD ROM  that is...

Every morning when i switch on my PC i get following message, "the execution illegal instruction an attempt was made to execute an illegal instuction. (0xc00000id) occured in the application at location 0x0190f2b8

My problem started when I transferred pictures from my hard drive to the micro SD.  All of the pictures on the disc were listed with the same ddd.dddd filename.  I decided to format the SD and start over.  I went to "my computer" and tried to...

I have a macpro laptop that has been running windows xp in bootcamp.  Recently, while powering on the laptop, the mac side will not boot and is stuck in the grey screen with the apple logo and progress bar not advancing.  The windowes side,...

Hi all -

I have an lftp program which perform a put operation and then check the size of the file.

put -O /home/ $FILE -o $FILE_NAME
du -b /home/$FILE_NAME

Now, I want to capture the output of the du command and make sure the size of...

Hi Bellow is my nagios report

Host1

HTTP
      
      OK       12-02-2009 14:20:16       2d 18h 19m 32s       1/4       HTTP OK: HTTP/1.1 200 OK - 281 bytes in 0.060 second response time
      
PING
      
      OK       12-02-2009 14:20:10       0d 3h 43m 28s       1/4       PING OK - Packet...

when ever restart server, always asking press F1 to continue.
without pressing F1, we cannot continue.
how to remove this option.

hi
i want to install 50 PC windows xp SP2 after iam install the windows i go and install (VGA,sound,lan,fax modem,...) driver for each PC
is there any way to add my driver to windows CD ( i mean add the above driver to windows Cd thus when...

The following script works good but the videos does not live in one directory.
The videos information is save as DirOne/SubDir/myVideo.mov in the database.
How can I ignore download.php and have the video to force download?
Is this possible...

can Leopard ( Apple OS ) be installed with VMWARE

Noticed the Topic Area has (general) so I asked it in here.

I picked up a manual today 'using the system software' based on workbench 2.0 - I searched google trying to find some guide or something on how to get amiga OS to run in a PC...

How do we check a particular directory is owned by which user.

where can i get boot up disk for os2,dont have access to pc to create one

How may IBM's eServer be set up to allow PC's that lack the usual BootP (RPL) Roms to PXE boot? The PCs are a new blade form factor that due to space constraints on the motherboard lack RPL capability. The Intel PRO 100+ chipset is used. Having...

MY NEAXMAIL did not shutdwon properly and now it won't restart. the error message says that AVMSGK1.ARV failed Error SysInti(argc, argv) cc=99.

SWMON starts and a message says waiting for shutdown...do not attempt manual

I'm getting the following error when I try to run a servlet on Eclipse.  Starting Tomcat v6.0 Server at LocalHost has encountered a problem.  

Serveral Ports (8080, 8009) required by tomcat ... are already in use.  The server may already be...

Hello folks,

I'm trying to fix a computer for one of senior sergeants. It'd be worth some brownie points and that's about it. The computer is a Everex VA1500V which you can read more about here:...

I need to be able to convert the following physical address to logical addresses. I am not sure the formula or the starting point.
given the segmentation table below
0430
110
2500
3400
4112

Segment      Base      Length
0              219               600...

Hello everyone,

I'm using a laptop - Acer TravelMate 3270 - with Win Vista Enterprise and Intel Wireless card. All drivers were setted up correctly and working perfectly. But when windows startup, wireless card don't connect to wifi...

I'm looking for packet drivers for OS/2.
I have a 3Com EtherLink III ISA adapter (3C509B).
I've downlaoded the drivers from the net, but it doesn't include a packet driver for OS/2.
I also tried looking for drivers for a few other Network...

Hi Experts,
I have a original MAC OS box that has one purpose, holding small text files, it gets from a mac share on a file server. Well, the os box crashed, and i had one to replace it with. However, it is missing the small app that watchs the...

I am using VB to connect to an AS/400  terminal emulator (MyExtra) and send keystrokes to it.

My problem is that shift+enter should be .<enter>, but this only works after a command like /FOR X601 on the top of the screen . If I am using it...

Hello!
I have the same problem and question as persepolis_jr has. I am looking for OS/2 driver for 3COM NIC 3C905C-TX card. As I read in the answer from KLYKLY, the driver exist. How can I obtain it? Thanks

Maros

The original...

This is a Dell computer with a 400GB hard drive, 2GB memory.  The O/S is winxp.  Dujring startup I can't even get into safe mode.  How can I get this PC to have a normal startup.  Any help will be appreciated.  Thanks.

I am a new user in OS/2 and I would like to know the commands or utilities used to map a network drive. In Novell network environment, we use "map". How about in OS/2?

...giving a long message starting with "trap 000e" on black screen.
How to get rid of it?
My system used to stop the same way years ago, but I got rid of it installing new display driver. Now I get trapped again after re-installing whole OS...

In z/OS MVS, I've successfully written JCL to create my first Generational Dataset Group (GDG) base. I've run the JCL and now have a gdg base including a model dataset with a DSCB. How do I create my first GDG dataset? What should my JCL look...

We are trying to find a program that we can use to edit our OSCommerce website. We would like to find a program that uses the WYSIWYG approach instead of programming HTML. We tried using Front Page which worked for some small things but we need...

I have been told that samba would be the best to transfer files.
I have samba installed on linux server can any give me steps so as to move files from unix to windows.

Has anyone had success (or failure) imaging and restoring with either Acronis or Ghost on an OS/2  HD?  Please no comments needed regarding Acronis/Ghost on Windows OS.. I need to specifically hear from experience on OS/2.  Thanks.

Why do I get this error?

TRAP 000d  ERRCO=0000  ERACC=****  ERLIM=****
EAX=0000  EBX=9bb7b40c  ECX=00000000  EDX=00000000
ESI=9bd30000  EDI=00863d70  EBP=008b58f4  FLG=00012216
CS:EIP=0fe8:0000513c  CSACC=009b  CSLIM=00004a17...

Hi,

I have an 80gb hard drive which i have been using to test my partitioning ability! and i have to report i am not very good judging at what i have managed to do

at the moment when i fdisk and display partition info there is nothing there...

Hi

Hopinf someone might be able to cast some light on this issuette.

I have a Voice Recorder based on an OS/2 Warp box. The VR application can be access by local "front panel", local keyboard, or via LAN access. Its the last that is causing...

locks up in safe mode runs all drivers then locks up when it runs> mulit(0)disk(0)ridisk(0)partition(1)\WINDOWS\system32\Drivers\Mup.sys.  Any suggestions, would be much appreciated...

I am having a problem using a hard drive puled from an IBM Thinkcentre in a Dell Vostro 220.

When started, the Dell splash appears (F2 for setup, F12 for boot menu...), after this splash screen text appears at the top of the monitor referring...

I use a Windoze application (DRAFIX CAD v3.00) that hogs all "available" CPU cycles.  This makes things in the background run somewhat slowly, but that's OK, when the app is in the foreground.  However, it continues to eat all available cycles...

I have a user running Win XP with IE-7 who cannot see documents in a document library.  The user has read permissions to the document library.  Any idea why this is happening or how to fix this?

Hello everybody!
I want to see what kind of OS is OS/2 because I know it's the most stable in the world!But I don't have so much money to give to IBM - $259 and I know that OS/2 Warp 3 is on 18 floppies so it's not much for sending it to...

I need to backup a machine running OS/2 with HPFS file system. If I create an acronis boot cd will it read this? If not what is the best way to backup that system?

Hi, I am doing a Operation System Homework problem. However, I just have no idea about this problem (I can't find the answer in the book.)  I wonder if someone here can explain it for me?

The question is:
In virtually all systems that include...

I'm trying to access my Outlook Web Access on a Mac OS 10.5.2 using IE 5.2 and I get the "Connection Failure has Occurred" error message. I was able to get a popup window from another domain running Exchange 2003 also. Not sure what I do or don't...

We have two pretty much identical new 2008 Servers in a domain.
They are both HP Proliants DL380's with 8 Gb RAM and pretty much the same service pack level.
They both also run Exchange.
After a restart it takes one of the servers about 45...

Hi!

I get many traps on a system with Warp 4 installed.  I
cannot seem to isolate the causes, but sometimes it happens
when the system is simply "sitting there"

The problem, whether trap c,d,e,6 (most common) usuallly
occurs at...

I just found out about the arcinst.exe from a news group. Where can I find additional information on this exe and the other cmd's and exe's in the os/2 director?

Hello All,

I have a "repartee" voicemail system running on OS2.  The drive is a fujitsu 6.4gb.  It has fujitsu's dynamic drive overlay installed on it.  I inherited this system, so I do not know why the DDO is installed.

I want to...

I recently installed a 6.4GB hard drive. When I went into FDISK the correct byte size was displayed, however, a message came up telling me that the partition was corrupt and all I was able to do was delete partitions, I couldn't create any...

When I use the "Find" icon on my Tungsten T3 the corresponding subjects display as they should.  When I go to select a desired subject, I usually receive a fatal error message.  I can reset the PDA but have to repeat the process again with the...

I have a user who changed his desktop lockup password and then forgot what he changed it to. He has lockup on startup turned on. The version is Warp Connect 3. How can I reset his password without losing his desktop settings?

Can anyone point me in the direction of a script or means of automatically accepting the Genuine Advantage update(s)? There are just too many clients to do this manually.

how do you change the time on OS/2. How do you get to a DOS prompt or whatever OS/2 uses.How do you get back to the os/2 desktop from a command prompt

I do not know what happend to my OS/2 Warp 4 Installation a few weeks ago. I have my system set up to run several Operating Systems on 8 or 9 partitions of my main drive.

Now, when I go to the OS/2-Drive-Selection-Window, I can select my D and...

Hi all
Can I know what is the latest Java runtime version for OS/2 Warp 3. I've seen v1.1.8 from IBM web site but I still get lots of Java Script error after installing it when browsing with Netscape. (eg www.yahoo.com)

I know that in Windows...

What are the steps for mapping a drive on a OS/2 server?

I have a 2007 exchange server. I go to add a new group using the Exchange Management console and i get the following error:

Active Direcdtory operation failed on machine.domain.com. The object 'CN=service,CN=Users,DC=domain,DC=Com' already...

Does anyone know a way I can see Netapp filers and samba servers from os/2?  

ok, here's a qn to kill everybody. Where can I download hp670C printer driver for OS/2, free of charge ?

When we load OS/2 on Pentium 166 MHz or above, for dual boot operation (DOS and OS/2), the machine hangs on selecting the
os/2 option from boot manager menu. This may happen randomly, i.e. many times the system boots smoothly to OS/2 . When there...

This is my first time dealing with OS/2 and no one at my company is familiar with it (an external customer uses OS/2, so I must also).  I need to get the OS/2 machine talking to our NT network.  Using NetBios, and TCP/IP in the OS/2 machine, I...

Does OS/2 support DDM?  If it does, does it also support DDM data queues?  Also, can DDM run over TCP/IP?  (I know it's SNA based but some platforms - like the Awesome Server 400 - support it over TCP/IP as well as SNA).

 I would like to use...

Dear Sir ,
                   i have windows xp pro sp3 suddenly my desktop icons (all files and folders are appearing as a blue shadow .
kindly help
regards

Has anyone connected win95 network to an OS/2 network?? I am trying this with file & print share client on warp 4 but not having much luck!! Also trying to add IPX support to OS/2...what protocol do you add to get this? Novell client??

Cheers,

...

Here's the sequence of events and the current state of my 'pooter

1.  WPS hangs after boot, mouse cursor was a timer, rather than the pointer.

2.  Using WatchCat demonstrated a whackload of blocked threads.

3.  I recall seeing my demo of...

Pentium 75, OS2 v3.0, 16 Mb Ram

During Navigator 2.02 browsing, the program will crash and display this message;

SYS3175 - A program in this session encountered a problem and cannot contiune.

This message appear frequently especially after...

Guys,
Ive got a SCO openserver (3.2) that will allow access by telnet to anyone on the LAN but when I forward in telnet (temporary) from the firewall it rejects the connection attempts.  From the client it just times out. I presume the previous...

I recently installed a larger hard drive on my HP laptop using Windows XP and now whenever I shut it down, I get a message that says;
"Other people are logged on to this computer.  Shutting down may cause them to loose data."
Can someone tell...

Whenever I map a Netware volume using the Netware Tools icon, things work fine for about a week.  However, after that time period, the drive mapping is lost!  It no longer exists..  I am using the Z:.  This is not acceptable, since we need to...

Hello!

I recently insatall OS/2 Warp Server SMP and would like to install device driver to SIS 5595 through SciTech.

Must I first need install fixpak 35.

Where can I get (exactaly) this fixpak? What correct address?

thanks

Hi Experts:
I have couple Windows 2000 server that is in a workgroup. Is there a way to automatically disable inactive user accounts?

Thanks

When running software called Unicorn I get the following error message: System error sys3171 - due to insufficient stack space, the exception was not dispatched. The process was terminated.

How can i fix this?

Otta, answer this...:)

OS/2 warp3.0, Y2K fixpack w32, Pentium 75, 32MB RAM, > 100MB HD space.

        i'm running Netscape 2.02 and whenever i click the page setup from file menu or print a doc after some
        browsing activities, netscape...

Hi,

Is there an easy way to schedule OS/2 Warp v4.0 to perform (script) an unattended shutdown and again reboot at specific time?
VERY URGENT PLS
Thanks

I accidentally moved some files on my Mac OS X 10.4.11 and now some of my programs won't work. How can I find out where they are supposed to go? I bought my iBook G4 through Ebay. They didn't send the system utilities disks with the computer.

Our network file server is window 2003 storage serve 2003 R2 with TCP/IP. I read that there is NetBui support through Windows XP instllation CD  CD-Rom. Is it possible to map to a Windows share once NetBui is installed on the Window server? I...

I just got Warp 4 after running the beta since it came out
and also purchased a Matrox Impressions VLB/2mb.

The problem is, is that I can't load a fullscreen Win-OS/2
session because it can't load matrox's 'smga16.drv'.

I've checked through...

I read somewhere that you can run windows 95 under os/2 warp version 4.0.  Is this true and if so how do you do it.

After removing a software POLY/PM using the sofware uninstall options. The computer stops detecting the cd-rom. I noticed when it boots up, connecting to the network (Novell 3.12) it is mapping to the E: drive which is the CD. I checked the...

Hi All Experts...

1. Could u help me how can i activate the telnet password but without shown at config.sys.

2. I have a lot of OS/2 Client online on network, for security reason i need to change telnet one by one. Is it have another way to...

I'm going to put a picture in OS/2.  The original file is *.bmp which can be opened in windows platform.  I want to convert the *.bmp file which can be opened in OS/2 platform.

I open the Picture Reviewer in OS/2, found that it only supports 3...

I´ve been searching where Download borland for OS/2, and I didn´t find anything, could anyone tell me where I can find it?

Thanks

Please, tell me what key I must use to write an ASCII extended caracter 126.
Waiting someone help me I thanks in advance.
Symotom
Saturday, November 14 2009, 14: 47 hs.- (GMT-4)

I am uning the OS/2 ver3 operating system.  When I try to run Microsoft Office Word or Excell I get an error message which states "Call to undefined dynalink".  What can I do to restore functionality to the program?  I have already tried to...

Hi
is it possible to print in color from e.g: ms word in win-os/2.
The printer works in the color mode, but the printout is only black and white?

best regards

Hi there, again here I am and have other question..

on my OS/2 3.0 system has OS20MEMU. I would like to know if
OS30MEMU verision is released? is it newest verision?
If so, where can I get or download?

Good luck to you guys.

Thanks,

Adrian Gil

I have following problem with Warp 4.
When booting the system, startup.cmd is in foreground until the desktop
is setting up. Once the desktop is up, startup.cmd looses the focus.
This is a problem for me, because i use startup.cmd to load several...

I installed a new S3 Virge card #325 and some HTML is corrupt (ie. some bullets show up as accented a) when viewing it with the 1.0311 drivers.  I tried the Gradd drivers for S3, but they were very instable.  I will pick stability over looks any...

I've been told that OS/2 does not support COM/DCOM and so I am in search of a way to remotely execute programs and batch files residing on an OS/2 machine from a Windows NT machine... I started to look into the "rsh" command, and have had some...

I'm not new to computers, but I am new to OS2.  We have a voice mail system that runs on an OS2 Warp4 based computer.  The Hardware needs upgrading and I have run into problems. I am installing to a 20GB hard drive (the smallest I could new one I...

I'm looking for a tool which will aid in the portation of OS/2 PM code to a Windows 32 environment.  I know one tool, SMART from One-up Corporation used to do this, but One-up no longer sells this tool.

I've been getting this error message: "SYS1200, code 002."
How can I restore the OS/2 DOS capabilities I seem to have lost?

The command setboot of os/2 doesn't work if I boot my computer with DOS operating system (I have a DOS and OS/2 partition).

I want to use the OS/2 boot manager, so the command 'boot /os2' is not what I am looking for.

Is there any execute...