I cannot ping a SCO unix host accross a site-to-site hardware VPN.
I've set up a site-to-site VPN using two new NETGEAR FVG318 VPN Routers. both sites have new, identical ADSL service with 6Mb down/512Mb up speed. Both sites have static public IP's. I set up the IPSec VPN tunnel as follows:
Site1 - LAN(10.20.17.0/255.255.255
.0) - FVG318(LAN IP=10.20.17.1) , (WAN IP=xx.xxx.77.9) --
Site2 - LAN(192.168.124.0/255.255.
255.0) - FVG318(LAN IP=192.168.124.1), (WAN IP=xx.xxx.77.33
The SCO Unix box is on Site1 with a LAN IP of 10.20.17.70. This is the only server and clients are either Windows 2000 or XP. The VPN is up and running but I am not able to ping the SCO Unix box on Site1 from a client PC on Site2. I am able to ping the Site1 router(10.20.17.1), client PC's and a jetdirect print server on Site1 from PC's on Site2. The SCO box responds to ping only from PC's on Site1 but not from PC's on Site2.
Any help on this whould be much appreciated.
Start Free Trial