When I enter a cancel command to cancel a print job that is hung, I get the following, and the jobs is not removed..all of the jobs below were cancelled asnd still show as follows
lp6-508600 ...
We've got an old server that had a bad hard drive. I've imaged it to another drive but the system won't boot. It was running SCO OpenServer 5. In my research on the issue, I've found that t...
The server is Unix SCO
The workstation is Windows XP Pro
The workstation uses TinyTERM to access and work with the application in the Unix Server.
All printer outputs is automatically...
I need a script which I can schedule in the Sco Unix crontab which will access variable-named files in a particular directory and remove all carriage returns and any line feeds, which are pres...
How do i return yesterday's date with SCO Unix release 5.0.6 in the format 'YYYYMMDD'. The command date gives me today's date. And i would like the previous day's
Hi,
I am trying to use the mail command in the following way:
$ mail root < /tmp/db_reorg.log
OR
$ echo "Coming home for dinner!" | mail sylvia@home.com
to send a file that is generated...
Hi Experts,
I am a Linux Engineer but not too familiar with SCO Openserver Unix. I was wondering how I could do the following:
1. How can I start/stop and disable portmap service ? In Li...
I'm runing an ISA server as a router and I'm having trouble reaching our UNIX servers via FTP. I can ping and telnet to them fine, but FTP fails to connect.
FTP does connect fine to Window...
I am trying to install OpenServer 5.0.4 on a PowerEdge 2300. The system is configured with three 9GB SCSI drives in a RAID 5 configuration on a Perc RAID controller, a SCSI CD Rom on a Adapte...
Hi,
I am trying to install SCO unix 6.0 on a dell server and it has SATA Raid5 raid card with 3 SATA hard drives. For some reason SCO is not recognizing the configuration. I am not able to lo...
I'm trying to do a restore on a system running SCO OpenServer 5.0.7. I've done some research and I THINK I'm adding the tape device correctly. I've used 'mkdev tape' to add the tape. There ...
Hi, is it possible to setup an NFS between SCO O/S 5 and remote Windows XP machine?
If so, can anyone recommend a very good source of advice on how to achieve this as I have zip experience in...
On Friday afternoon we had a power outage here in the building. This Dell PowerEdge was attached to a UPS, but that failed and the machine was shutdown hard. Now, the machine will not boot. Wh...
Hi
I have a Dell box with an Intel Pro/1000 MT card installed and I'm running SCO Openserver 5.0.6. It wasn't until I tried to do backups to an external NFS drive that I realized the card ...
Without giving all of the backstory - I've downloaded the OpenServer 5.0.7 ISO from SCO and I only need it to run for a day or two while I use the install to fix a server we have running OpenS...
I cannot ping a SCO unix host accross a site-to-site hardware VPN.
I've set up a site-to-site VPN using two new NETGEAR FVG318 VPN Routers. both sites have new, identical ADSL service with ...
When running the 'lpstat -t' command on my SCO Unix version 5.0.7 i386, it displays several printer queues and then just hangs indefinitely. It never completes the printer listing of all print...
I have a customer who has a SCO OpenServer 6.0 server. Recently, the root password has been changed and no one in the company knows who changed it or what it is. I have been called out to re...
Hi all,
I have a problem with logging into sco open server 5.0.6Ga.
I would describe myself as a novice to slightly better sco unix user...
First a little about the server
This server...
I'm getting frustrated with SCO and need some help. I need to install Samba but found out the GCC wasn't installed. So I downloaded GCC and tried configuring but get an error:
checking for ...
What is the best way to duplicate a 9GB to another for replacement of the SCO unix disk in a single disk system?
I'm running SCO OSR 5.0.7 and my server IP is 192.168.2.7 , I want to setup a printer using a print server module Dlink DP-301P+, I setup the print server to be IP 192.168.2.17.
How can I cre...
I have a SCO Unix server kernel 3.0.3 ..(very old one though ... i feel its from 2002) .
The server was running hapily for long time andn now it doesn't boots up.
When I start it I get nme...
Hi,
I have a server currently running Sco OpenServer Release 5. (Version 5.0.5) with a Progress (8.3) Database application running on it. Due to performance considerations a replacement ser...
I am wondering if anybody has any experience, tips, prewritten routines etc they would be willing to share for exporting data from a UNIX based system called Intellect into Windows? Intellect ...
