Hi,
Robocat has given me the following to install the HP Jetdirect software
Solaris box to configure LaserJet print queues with JetDirect.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18924&prodTypeId=18964&prodSeriesId=27351&swLang=8&taskId=135&swEnvOID=1088In our case the printer model is LaserJ 4250
After install, a spooler configuration program in /opt/hpnpl/hppi allows us to configure hp printer queues.
It's now printing fine double-sided but along short edge of the paper.
Users now wants doubleside along long edge of the paper (ie we
flip on the long edge to read the back page of paper). MSWord
printing to this same printer came out doubleside on the long edge
& users can't find any Printer Setup on the LCD that could configure
this setting.
How do we do this? I've indicated the section below (by <<==) which is probably
where doubleside printing is configured :
sun02:/tmp > /opt/hpnpl/hppi
**************************
**********
**********
**********
********
**** ] **** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.34
**** ] ] ]]]]] **** M A I N M E N U
****** ] **** User: (root) OS: (SunOS 5.8)
**************************
**********
**********
**********
********
1) Spooler Administration (super-user only)
2) JetDirect Configuration (super-user only)
- TCP/IP configurable parameters
3) Diagnostics:
- diagnose printing problems
?) Help q) Quit
Please enter a selection (q - quit): 1
**************************
**********
**********
**********
********
**** ] **** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.34
**** ] ] ]]]]] **** Spooler Administration
****** ] **** User: (root) OS: (SunOS 5.8)
**************************
**********
**********
**********
********
Spooler:
1) Add printer to local spooler
2) Delete printer from local spooler
3) Modify existing spooler queue(s)
4) Install New Model Script
5) Remove Model Script
?) Help q) Quit
Please enter selection: 3
Currently configured HP network print queues:
--------------------------
----------
----------
-
dvsy01 sds1_hp1
Enter the lp destination name (q - quit): q
**************************
**********
**********
**********
********
**** ] **** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.34
**** ] ] ]]]]] **** Spooler Administration
****** ] **** User: (root) OS: (SunOS 5.8)
**************************
**********
**********
**********
********
Spooler:
1) Add printer to local spooler
2) Delete printer from local spooler
3) Modify existing spooler queue(s)
4) Install New Model Script
5) Remove Model Script
?) Help q) Quit
Please enter selection: 1
Enter the network printer name or IP address (q - quit): 10.51.19.140
The given printer does not have the Model Script/PrinterList
entry associated with it.
1. Accept a new Model Script for this printer.
2. Select printer model from the existing Printer list.
Please enter the choice (q-quit) : 2
The following are supported printer types:
1) HP LaserJet IIISi
2) HP PaintJet XL300
3) HP LaserJet 4 Plus / 4M Plus
. . . . .
35) HP LaserJet 4000 Series
36) HP LaserJet 5000 Series
37) HP Color LaserJet 4500
38) HP DesignJet 3000CP
. . . . .
52) HP DeskJet 1200C / 1200C/PS
53) HP DesignJet 650C
. . . . .
Please indicate 10.51.19.140's printer type (q - quit): 35
\Configurable Parameters: Current Settings
----------------------- ----------------
1) Lp destination (queue) name [10_1]
2) Status log [(No log)]
3) Queue class [(not assigned)]
4) Default queue [NO]
5) Additional printer configuration...
Select an item for change, or '0' to configure (q-quit): 1
Currently used names:
---------------------
dvsy01 sds1_hp1
Enter the lp destination name (default=10_1, q - quit): slarghp1
Select an item for change, or '0' to configure (q-quit): 2
Configurable Parameters: Current Settings
----------------------- ----------------
1) Lp destination (queue) name [slarghp1]
2) Status log [/var/tmp/slarghp1.log]
3) Queue class [(not assigned)]
4) Default queue [NO]
5) Additional printer configuration...
Configurable Parameters: Current Settings
------------------------ ----------------
1) Model Script: [net_ljx000]
2) Default Printing Language [AUTO]
3) Job Recovery [ON]
4) True End-of-Job [ON]
5) Banner Page [ON]
6) PostScript Level [Level 2]
7) Banner Tray [default]
8) Banner Paper Size [default]
9) Duplex print [default]
Select an item for change, or q when done: 5
The following is a list of suggested parameter values for this printer.
To abort this operation, press 'q'.
Configurable Parameters: Current Settings
------------------------ ----------------
1) Model Script: [net_ljx000]
2) Default Printing Language [AUTO]
3) Job Recovery [ON]
4) True End-of-Job [ON]
5) Banner Page [OFF]
6) PostScript Level [Level 2]
7) Banner Tray [default]
8) Banner Paper Size [default]
9) Duplex print [default] <<===
Configurable Parameters: Current Settings
----------------------- ----------------
1) Lp destination (queue) name [slarghp1]
2) Status log [/var/tmp/slarghp1.log]
3) Queue class [(not assigned)]
4) Default queue [NO]
5) Additional printer configuration...
Select an item for change, or '0' to configure (q-quit):
Configurable Parameters: Current Settings
----------------------- ----------------
1) Lp destination (queue) name [slarghp1]
2) Status log [/var/tmp/slarghp1.log]
3) Queue class [(not assigned)]
4) Default queue [NO]
5) Additional printer configuration...
Select an item for change, or '0' to configure (q-quit): 0
Ready to configure slarghp1.
OK to continue? (y/n/q, default=y) y
Start Free Trial
