How and where to download VMware-vpxa-2.5.0-64192.i386.rpm?
We receive the following error when attempting to connect.
There was a problem connecting
510 could not execute /usr/sbin/vmware-serverd
i attached a screenshot
server = 10.0.5.10...
When trying to install Windows Server 2008 to a VMWare ESX 3.5 Server, I get an error during the step "Where do you want to install Windows". The installation detects that I have a disk with 2...
We have a bootable USB stick housing a Linux install with VMWare Server and a VM of a licenced MS Windows XP installation on another USB (we previously used a BartPE, but updating the tools in...
Scenario:
We have a Windows 2003 'Physical' Server with a 1TB hard drive. I would like to add it as additional storage for VMware ESX 3.5 through way of NFS. However, I can't seem to get ...
I am running VM Ware Server version 8.0 running Windows Server 2003 Standard (172.16.0.109)and have so far configured one guest OS (Windows Server 2003 Standard) in network bridged mode on the...
I want to build a low cost ESX machine for study/cert use at home.
What motherboard/controller/drive combo's does anyone have working without too much grief.
No points awarded for pointe...
HP has advised us to install HPSIM (System Insight Manager) on a Windows
box. We're told if HPSIM is able to connect to our VMWare ESX via Snmp or
DMI or WBEM, we're able to port this Windo...
Hi There.
I am running VMWare ESX and wish to run Server 2008 as a Virtual Machine. Do i need to dsownload anything to make Server 2008 Standard X64 Hyper-V aware?
I'm a little confused ...
Hey Experts,
I just got done installing a trial version of ESX server 3.5. I am connected to the HOST through the VMWare Infrastructure client on my xp workstation. I have a VM created, and...
I have a VM running on a VmWare infrastructure server 2.5.0. One of my VMs keeps BSODing and has thrown the following error code:
Error code 000000d1, parameter1 00001002, parameter2 0000000...
I'm trying to install Openfiler.
Virtual Center 2.5.0
ESX 3.5
VI Client V2.5.0
When I download the 'x86 ESX Virtual Appliance' off openfiler.com it comes as a tar.gz file.
I extracted i...
Hello,
I have used VCB as a tool for doing backup using the follow command: vcbmounter.
It's all ok but I have some warning message like this:
[2008-08-01 10:26:36.422 'App' 4460...
My vpxa service is not starting . seems like VMware-vpxa-2.5.0-64192.i386.rpm is corrupted ..i need to download the same package and reinstall it again...kindly guide me how to do it ?
According to the ESX 3.5 install it successfully finished the install, but upon rebooting the Dell PowerEdge 2900 server it hangs at the Loading VMKernel megaraid_sas.o (options: ).
While...
Our ESX3.5 server runs on a RAID10 array of 8 disks. We had a two-drive failure over the weekend. I have completed the rebuild, however we are still experiencing many problems with our VMs.
...
If you resize a volume on an Equallogic SAN that is being used for an ESX server, what do you need to do to make all of the space available to the ESX server?
Hi,
My company currently is using whole VI based on 3.5 ESX hosts. recently we had to move one of our VM's to other hosts. Problem we encountered is very strange. VM should have only 2 disk f...
we have an ESX 3i host that has an external 1tb USB drive setup as a VMFS datastore, but this was done by another admin and I think during initial setup, I am trying to add a 1tb USB volume to...
I don't have a shared storage is it possible to test windows 2003 clustering on a VMware server(GSX).Are their any readily create images of windows 2003 which I can use for server cluster.
OK, let me start out by saying I'm still very new to the VmWare world and I have inherided to vmware server from the previous admin. Anyway I need to transfer a *.VMDK file / VM from on ESX se...
i have 2003 server paused in vmware. i lost power then rebooted. i cant open that os because it says that its allreddy in use. how do i fix this.
Greetings -
I have a VMware ESX Server (3.0.2) single host environment and am having some issues with my VM network connectivity. I have a few real (as in, not Virtual) NIC bonded networks...
Is there a way to modify the BIOS Manfacturer field in Microsoft Virtual PC? I've tried using dmicfg.exe but is fails to save the changes.
Hi All Expert
I am using VMware to build LAB environment.
Vmware 1.05 server
Machine1:
hostname: abcsyd
OS: Windows2003
Exchange 2003
Domain Name: abc.com.au
domain controller ...
