I have a Sun Enterprise E3500 on Solaris 8 that have 3 identical internal Sun 18G fiber channel disks. The problem is that, they look IDENTICAL so I don't know how to boot to a different disk from the Open Boot Prompt. Here is what they look like from the format command:
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/sbus@2,0/SUNW,socal@d,100
00/sf@0,0/
ssd@w21000
0203717a58
2,0
1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/sbus@2,0/SUNW,socal@d,100
00/sf@0,0/
ssd@w21000
0203717533
a,0
2. c0t2d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/sbus@2,0/SUNW,socal@d,100
00/sf@0,0/
ssd@w21000
0203718a70
7,0
I would like to boot from disk number 2 (c0t2d0) as it is a copy of disk number 0.
From the Open Boot Prompt, this is what shows up:
{a} ok devalias
screen /sbus@2,0/cgsix@1,0
disk /sbus@2,0/SUNW,socal@d,100
00/sf@0,0/
ssd@0,0
disksocal /sbus@2,0/SUNW,socal@d,100
00/sf@0,0/
ssd@0,0
disk /sbus@3,0/SUNW,fas@3,88000
00/sd@0,0
diskbrd /sbus@3,0/SUNW,fas@3,88000
00/sd@a,0
diskisp /sbus@3,0/QLGC,isp@0,10000
/sd@0,0
net /sbus@3,0/SUNW,hme@3,8c000
00
cdrom /sbus@3,0/SUNW,fas@3,88000
00/sd@6,0:
f
tape /sbus@3,0/SUNW,fas@3,88000
00/st@4,0
scsi /sbus@3,0/SUNW,fas@3,88000
00
disk0 /sbus@3,0/SUNW,fas@3,88000
00/sd@0,0
disk1 /sbus@3,0/SUNW,fas@3,88000
00/sd@1,0
disk2 /sbus@3,0/SUNW,fas@3,88000
00/sd@2,0
disk3 /sbus@3,0/SUNW,fas@3,88000
00/sd@3,0
disk4 /sbus@3,0/SUNW,fas@3,88000
00/sd@4,0
disk5 /sbus@3,0/SUNW,fas@3,88000
00/sd@5,0
tape0 /sbus@3,0/SUNW,fas@3,88000
00/st@4,0
tape1 /sbus@3,0/SUNW,fas@3,88000
00/st@5,0
ttya /central/fhc/zs@0,902000:a
ttyb /central/fhc/zs@0,902000:b
keyboard /central/fhc/zs@0,904000
keyboard! /central/fhc/zs@0,904000:f
orcemode
When I try to 'boot disk' or 'boot disksocal', it boots to the first disk (c0t0d0) every time.
Here is when I see from a show-disks at the OBP:
{a} ok show-disks
a) /sbus@7,0/QLGC,isp@0,10000
/sd
b) /sbus@7,0/SUNW,fas@3,88000
00/sd
c) /sbus@6,0/QLGC,isp@1,10000
/sd
d) /sbus@6,0/SUNW,socal@d,100
00/sf@1,0/
ssd
e) /sbus@6,0/SUNW,socal@d,100
00/sf@0,0/
ssd
f) /sbus@3,0/QLGC,isp@0,10000
/sd
g) /sbus@3,0/SUNW,fas@3,88000
00/sd
h) /sbus@2,0/SUNW,socal@d,100
00/sf@1,0/
ssd
i) /sbus@2,0/SUNW,socal@d,100
00/sf@0,0/
ssd
q) NO SELECTION
Please let me know if you have any ideas. I'm sure it's something minor that I am just missing.
Start Free Trial