powerpete
asked on
missing or corrupt: winnt root\system32\ntoskrnl.exe
Greetings,
I have a Compaq proliant server MT350 running NT 4.0. I have an adaptec controller with two mirrored (Supposed to be)SCSI drives. It took forever to find the startup disks and the adaptec driver to load.
I have serveral problems.
1. EIDE CD, after booting to up is not recongnized.
2. I have an duplicate server, same hardware config but slight setup differences, and I tried to create an Emergency Recover Disk and the Bloody thing won't fit on the floppy. Where can I find the files on the C drive.
I need some direction here.
This is a critical server for me and all the data is on it. We are down hard.
Powerpete
I have a Compaq proliant server MT350 running NT 4.0. I have an adaptec controller with two mirrored (Supposed to be)SCSI drives. It took forever to find the startup disks and the adaptec driver to load.
I have serveral problems.
1. EIDE CD, after booting to up is not recongnized.
2. I have an duplicate server, same hardware config but slight setup differences, and I tried to create an Emergency Recover Disk and the Bloody thing won't fit on the floppy. Where can I find the files on the C drive.
I need some direction here.
This is a critical server for me and all the data is on it. We are down hard.
Powerpete
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.