Advertisement

[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.
01/23/2006 at 11:43PM PST, ID: 21707722
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
8.0

TAPI - No dial tone

Asked by sunnette in C++ Programming Language

Tags: atdt, linemakecall

URGENT. I am writing a C++ TAPI application which needs to make a outgoing call. I would need to dial 9 to access an outside line. I use lineMakeCall to dial out and feed it 9Wxxxxxxxx where xxxxxxxx is the phone number that i want to dial to. But i keep on getting NO DIAL TONE. Attached is the modem log. Can someone please help.

01-24-2006 15:19:28.372 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600  
01-24-2006 15:19:28.372 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600  
01-24-2006 15:19:28.372 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600  
01-24-2006 15:19:28.372 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600  
01-24-2006 15:19:28.372 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600  
01-24-2006 15:19:28.372 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600  
01-24-2006 15:19:28.372 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600  
01-24-2006 15:19:28.372 - Modem type: PROLiNK 1456VE V90 External Modem
01-24-2006 15:19:28.372 - Modem inf path: oem32.inf
01-24-2006 15:19:28.372 - Modem inf section: ERVModem
01-24-2006 15:19:28.372 - Matching hardware ID: serenum\aei9249
01-24-2006 15:19:28.388 - 115200,8,N,1, ctsfl=1, rtsctl=2
01-24-2006 15:19:28.403 - Initializing modem.
01-24-2006 15:19:28.419 - Send: AT<cr>
01-24-2006 15:19:28.419 - Recv: AT<cr>
01-24-2006 15:19:28.419 - Command Echo
01-24-2006 15:19:28.419 - Recv: <cr><lf>OK<cr><lf>
01-24-2006 15:19:28.419 - Interpreted response: OK
01-24-2006 15:19:28.434 - Send: AT &F E0 V1 &D2 &C1 S95=47 S0=0<cr>
01-24-2006 15:19:28.434 - Recv: AT &F E0 V1 &D2 &C1 S95=47 S0=0<cr>
01-24-2006 15:19:28.434 - Command Echo
01-24-2006 15:19:28.450 - Recv: <cr><lf>OK<cr><lf>
01-24-2006 15:19:28.450 - Interpreted response: OK
01-24-2006 15:19:28.466 - Send: ATS7=60S30=0L1M1\N3%C3&K3BX4<cr>
01-24-2006 15:19:28.466 - Recv: <cr><lf>OK<cr><lf>
01-24-2006 15:19:28.466 - Interpreted response: OK
01-24-2006 15:19:28.466 - 115200,8,N,1, ctsfl=1, rtsctl=2
01-24-2006 15:19:28.481 - Initializing modem.
01-24-2006 15:19:28.497 - Send: AT<cr>
01-24-2006 15:19:28.513 - Recv: <cr><lf>OK<cr><lf>
01-24-2006 15:19:28.513 - Interpreted response: OK
01-24-2006 15:19:28.528 - Send: AT &F E0 V1 &D2 &C1 S95=47 S0=0<cr>
01-24-2006 15:19:28.544 - Recv: <cr><lf>OK<cr><lf>
01-24-2006 15:19:28.544 - Interpreted response: OK
01-24-2006 15:19:28.559 - Send: ATS7=60S30=0L1M1\N3%C3&K3BX4<cr>
01-24-2006 15:19:28.575 - Recv: <cr><lf>OK<cr><lf>
01-24-2006 15:19:28.575 - Interpreted response: OK
01-24-2006 15:19:28.575 - Dialing.
01-24-2006 15:19:28.591 - Send: ATDT#W########<cr>
01-24-2006 15:19:35.278 - Recv: <cr><lf>NO DIALTONE<cr><lf>
01-24-2006 15:19:35.278 - Interpreted response: No Dialtone
01-24-2006 15:19:35.278 - Hanging up the modem.
01-24-2006 15:19:35.294 - Send: ATH<cr>
01-24-2006 15:19:35.294 - Recv: <cr><lf>OK<cr><lf>
01-24-2006 15:19:35.294 - Interpreted response: OK
01-24-2006 15:19:35.294 - Session Statistics:
01-24-2006 15:19:35.294 -                Reads : 39 bytes
01-24-2006 15:19:35.294 -                Writes: 0 bytes
View the Solution FREE for 30 Days
[+][-]02/01/06 02:29 AM, ID: 15841929

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]02/15/06 04:23 PM, ID: 15966810

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zone: C++ Programming Language
Tags: atdt, linemakecall
Sign Up Now!
Solution Provided By: EE_AutoDeleter
Participating Experts: 1
Solution Grade: A
 
 
 
Loading Advertisement...
20090624-EE-VQP-63