brothertruffle880
asked on
Unable to Transcode WMV to MP4.
I'm using handbrake for the very first time and would like to take a WMV file and convert it to MP4.
When I say Scan a source Title "1" or Title "none" the software goes through a scanning sequence 10%, up to 100% and then stops. ?However, I can't do anything else after that!
I don't see any of my titles in the title drop down list.
I'm in the correct source folder and am selecting the correct source file.
I see my file listed after the word "Source:" However when I click START, the software is telling me "You must first scan a source.
" BUT I DID SCAN A SOURCE!
What am I doing wrong?
Here is the log:
-i "H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv" -t0 --min-duration=10 -v
[14:19:00] hb_init: starting libhb thread
HandBrake 0.9.9 (2013052900) - MinGW x86_64 - http://handbrake.fr
4 CPUs detected
Opening H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv...
[14:19:00] hb_scan: path=H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv, title_index=0
libbluray/bdnav/index_pars e.c:162: indx_parse(): error opening H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv/BDMV/index.bdmv
libbluray/bdnav/index_pars e.c:162: indx_parse(): error opening H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv/BDMV/BACKUP/index.bd mv
libbluray/bluray.c:1725: nav_get_title_list(H:\adap tik\2014-0 3-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv) failed (000000000031D540)
[14:19:00] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 4.1.3
libdvdread: Encrypted DVD support unavailable.
libdvdnav:DVDOpenFileUDF:U DFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdnav:DVDOpenFileUDF:U DFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[14:19:00] dvd: not a dvd - trying as a stream/file instead
Input #0, asf, from 'H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv':
Metadata:
WMFSDKVersion : 12.0.9600.16384
WMFSDKNeeded : 0.0.0.0000
IsVBR : 1
WM/ToolVersion : 6.2.1 Build 1350
WM/ToolName : 㙉䜴呯䵯敥楴æ®
BitRateFrom the writer: 3971
Audio samples : 3288
Video samples : 1450
recording time : Fri, 28 Mar 2014 16:04:25 Eastern Daylight Time
Duration: 00:54:58.90, start: 0.000000, bitrate: 400 kb/s
Stream #0.0: Audio: wmav2, 44100 Hz, 1 channels, fltp, 48 kb/s
Stream #0.1: Data: [0][0][0][0] / 0x0000, 2 kb/s
Stream #0.2: Video: G2M4 / 0x344D3247, 1920x1080, 349 kb/s, 2.30 fps, 1k tbn
[14:19:01] scan: decoding previews for title 1
[14:19:01] scan: audio 0x0: wmav2, rate=44100Hz, bitrate=48024 Unknown (wmav2) (1.0 ch)
[14:19:48] Warning: Could not read data for preview 10, skipped
[14:19:48] libhb: scan thread found 0 valid title(s)
No title found.
HandBrake has exited.
When I say Scan a source Title "1" or Title "none" the software goes through a scanning sequence 10%, up to 100% and then stops. ?However, I can't do anything else after that!
I don't see any of my titles in the title drop down list.
I'm in the correct source folder and am selecting the correct source file.
I see my file listed after the word "Source:" However when I click START, the software is telling me "You must first scan a source.
" BUT I DID SCAN A SOURCE!
What am I doing wrong?
Here is the log:
-i "H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv" -t0 --min-duration=10 -v
[14:19:00] hb_init: starting libhb thread
HandBrake 0.9.9 (2013052900) - MinGW x86_64 - http://handbrake.fr
4 CPUs detected
Opening H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv...
[14:19:00] hb_scan: path=H:\adaptik\2014-03-28
libbluray/bdnav/index_pars
libbluray/bdnav/index_pars
libbluray/bluray.c:1725: nav_get_title_list(H:\adap
[14:19:00] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 4.1.3
libdvdread: Encrypted DVD support unavailable.
libdvdnav:DVDOpenFileUDF:U
libdvdnav:DVDOpenFileUDF:U
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[14:19:00] dvd: not a dvd - trying as a stream/file instead
Input #0, asf, from 'H:\adaptik\2014-03-28 15.05 Placeholder for Policywriter Workflows Part 2.wmv':
Metadata:
WMFSDKVersion : 12.0.9600.16384
WMFSDKNeeded : 0.0.0.0000
IsVBR : 1
WM/ToolVersion : 6.2.1 Build 1350
WM/ToolName : 㙉䜴呯䵯敥楴æ®
BitRateFrom the writer: 3971
Audio samples : 3288
Video samples : 1450
recording time : Fri, 28 Mar 2014 16:04:25 Eastern Daylight Time
Duration: 00:54:58.90, start: 0.000000, bitrate: 400 kb/s
Stream #0.0: Audio: wmav2, 44100 Hz, 1 channels, fltp, 48 kb/s
Stream #0.1: Data: [0][0][0][0] / 0x0000, 2 kb/s
Stream #0.2: Video: G2M4 / 0x344D3247, 1920x1080, 349 kb/s, 2.30 fps, 1k tbn
[14:19:01] scan: decoding previews for title 1
[14:19:01] scan: audio 0x0: wmav2, rate=44100Hz, bitrate=48024 Unknown (wmav2) (1.0 ch)
[14:19:48] Warning: Could not read data for preview 10, skipped
[14:19:48] libhb: scan thread found 0 valid title(s)
No title found.
HandBrake has exited.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
The file is from a webinar I attended. Perhaps goto meeting? or something like that? I don't remember because we use several online meeting vendors.
I'm trying to clean the presentation up a bit using Camtasia.
First Camtasia asked me to move the script to the header so I did.
Then I was asked to re-index. So I did.
Now Camtasia is asking me to transcode it.
This is becoming sooo time-consuming.
IS THERE ANY WAY I CAN REPAIR THIS WMV file?
I'm trying to clean the presentation up a bit using Camtasia.
First Camtasia asked me to move the script to the header so I did.
Then I was asked to re-index. So I did.
Now Camtasia is asking me to transcode it.
This is becoming sooo time-consuming.
IS THERE ANY WAY I CAN REPAIR THIS WMV file?
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I'm going to try to play it in VLC.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
[21:19:27] scan: decoding previews for title 1
[21:19:27] scan: audio 0x0: wmav2, rate=44100Hz, bitrate=31960 English (wmav2) (2.0 ch)
[21:19:27] scan: 10 previews, 640x480, 22.667 fps, autocrop = 60/60/0/0, aspect 4:3, PAR 1:1
[21:19:28] libhb: scan thread found 1 valid title(s)
+ title 1:
+ stream: D:\tv\tk.wmv
+ duration: 00:29:32
+ size: 640x480, pixel aspect: 1/1, display aspect: 1.33, 22.667 fps
+ autocrop: 60/60/0/0
+ chapters:
+ 1: cells 0->0, 0 blocks, duration 00:03:06
+ 2: cells 0->0, 0 blocks, duration 00:00:25