Link to home
Start Free TrialLog in
Avatar of LeeKelley
LeeKelley

asked on

SATA hardware RAID1

does maxtor diamonmax plus 9 SATA/150 drives support hardware raid1
ASKER CERTIFIED SOLUTION
Avatar of rindi
rindi
Flag of Switzerland image
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of LeeKelley
LeeKelley

ASKER

I have a SATA Controller and SATA drives.  It appears the RAID1 is configured.  Drives have been build and verified, status OPTIMAL.  When trying to load Windows 2003 server, the OS does not see the drives.
SOLUTION
Avatar of Duncan Meyers
Duncan Meyers
Flag of Australia image
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of dsc18
dsc18
Windows 2003 by default can not see RAID Arrays. So even though you have a RAID1 all set up and working if you go into my computer windows it will only show 1 drive and nothing about the RAID Array. Sometimes the manufacturer of the computer system you are using offer an array mananger software. Like Dell has an array manager under Open manage applications, once this software is installed you can see details on your raid configuration.

DSC