Mopep
asked on
What if you cannot ping the asa after you have set the address 192.168.1.1 ?
I have an asa5510 that cannot ping the tftp server even after I have set the address. The device was working until I tried to update the asa and asdm . Now I'm at a point were I would like to just start over but can't get an image on the asa5510 because it will not respond.
have you tried switching cables? have you tried a crossover cable?
try this and return to rommon mode
try this and return to rommon mode
Also, you can use hyperterminal, or another terminal emulator program with a serial cable with Z-modem option if you cannot ping. This will be slower, but will work
ASKER
I have tried a crossover cable, with same results. Using hyperterminal, how can I push the file asa723-k8.bin to the asa5510? Sorry for the late response... sick kids at home... could not get back to your answers last night.
will give you step by step instructions around 8 PM EST
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thanks
ASKER