pscit04
asked on
DNS for Cisco PIX 515E
I have a Cisco Pix 515E and a consultant has half-way set this device up. Since DNS is not built into the device (as my current firewall which I want to use as a doorstop when this is done) how can I setup DNS for the firewall? We have W2K AD with single domain and a server running internal private networking IPs (10.1.x.x)? Should I just setup a server to run Public IP Addressing and point the Cisco PIX (how do I do this) to the server running the external IP addressing scheme?
You need to make sure you allow TCP port 23 as well from the outside.
-Eric
-Eric
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
W2K by default will act as a full DNS server. If you have an access-list applied to the internal interface just make sure the W2K server is permitted to communicate out on UDP port 53 and it will work. For AD to work correctly all your internal windows machines should use the W2K server as their DNS server anyway.