change static routes on Cisco ASA

Hi to all of you,
I need to modify the 3 static routes show below , can you please confirm that the command I'm going to type ( the ones in BOLD ) are correct?
Thank you
Carlettus

CISCOASA# show route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is 84.104.95.1 to network 0.0.0.0

S    192.168.240.0 255.255.255.0 [1/0] via 172.19.5.1, inside
C    84.104.95.0 255.255.255.192 is directly connected, outside
C    172.19.0.0 255.255.0.0 is directly connected, inside
S    192.168.221.0 255.255.255.0 [1/0] via 172.19.5.1, inside
S    192.168.223.0 255.255.255.0 [1/0] via 172.19.5.1, inside
S*   0.0.0.0 0.0.0.0 [1/0] via 84.104.95.1, outside
CISCOASA#

CISCOASA# clear ip route 192.168.240.0
CISCOASA# clear ip route 192.168.221.0
CISCOASA# clear ip route 192.168.223.0

CISCOASA# route inside 192.168.240.0 255.255.255.0 172.19.0.3
CISCOASA# route inside 192.168.221.0 255.255.255.0 172.19.0.3
CISCOASA# route inside 192.168.223.0 255.255.255.0 172.19.0.3