Checkpoint SecureClient NGX R60 HFA 2 - supplement 3 in not installing on my new Vista 64 bit laptop. Is this version compatible to Vista 64bit? If not, what might be a workaround.
Ok so here's the issue. I have a UTM-1 270 NGX R65 with VPN turned on. I am using the certificate method for authentication with the latest Secureclient installed (ver. NGX R60 HFA2 Build 002)...
I have two XP users on my LAN that can successfully authenticate and access a customer's remote network via Checkpoint SecureClient R60. I have tried to install the same client software on th...
Hi,
Is there any way to connect a linux box to a checkpoint VPN?
We have a Checkpoint edge VPN firewall. The router uses a local list on the router itself for login information, it does not use LDAP. When employees are on the network using their laptop, the...
OK, I'll try and explain this as best I can,
Some months ago I set up an Anti-spam/Anti-virus gateway on my network. I placed it in a DMZ. When originally set up checkpoint was at version...
I am trying to create a tunnel between our company Checkpoint Firewall and a clients Cisco ASA 5510.
Current Situation:
Phase 1 settings are fine on both sides,matching.
Phase 2:
...
Checkpoint VPN-1 & Firewall-1 NGX (R65) Build 427
Hi,
Following a power failure my checkpoint firewall running on windows 2000 server SP4 is refusing to push a policy. The rulebase in S...
Hi,
What type of cable do you use to connect to a Nokia IP350 firewall, the connection type is 9 min male.
I have tried to connect and I get a blank screen no logon prompt. IS the cable Nu...
What my focus is to access three systems remotely thru web pages by giving different port nos. i m getting the remote desktop screen and i can put the ip address of remote system after the co...
--------------------------------------------------------------------------------
We have a distributed Checkpoint NGX R62, the enforcement module, internal address 192.168.2.1, on securepla...
Hi everyone:
This one has checkpoint support scratching their heads.
Site A (Main) - VPN-1 UTM running R62
Site B (Remote) - VPN-1 Edge XU running 7.5.55 Configured to pass a...
I cannot connect from my client pc with smartcenter software installed, e.g. Dashboard, to by Checkpoint management server. I get an error of "connection cannot be initiated. Make sure the ...
Hi
i have a windows 200 checkpoint management server which has very little disk space left due to checpoint log files. Can someone tell me how to delete these. When i try to delete ones f...
I need to get some general direction or assistance in implementing L2TP to on our new Ubuntu notebook. We need to be able to VPN into our CheckPoint firewall. Currently the Checkpoint VPN (S...
I am trying to create a lab enviroment for CheckPoint NGX R65
I have a PC, with checkpoint installed (VPN-1 UTM)
Then i install on a second pc the SmartCenter & SmartDashBoard
To SmartC...
hello all,
When I am trying to apply a policy to firewall members, it fails. I believe it is due to SIC problem. When a communication SIC test is undertaken I receive the following message:...
Hi
I have a Citrix WI & CSG server sitting in a DMZ using the checkpoint firewall. I have enabled rules to allow SSL communication with this server across the internet which works fine.
The ...
Hi All,
I'm in need of some assistance. I want to get a backup of my checkpoint configuration. We are planning for disaster recovery and I need these files off site. I've logged on as ad...
How can i add a static route to a Checkpoint applicance?
I dont have access to Web Interface anymore, but I have access to SmartDashboard (its version R65). If I add it through SSH, how can...
I am trying to esblishlish an IPSEC site-to-site tunnel between a Nortel Contivity and Checkpoint 500P. I am located at the Nortel. I have multiple other Checkpoint devices connected to the No...
Certificate on my checkpoint vpn has expired and a don't know how to renew it.
I have options Add, Edit and Remove. I wanted to remove current certificate but it says "Certificate is using a ...
Dear Expert Team,
my internet connection slow because of firewall protected and download also slow. How to make it fast. I have installed Zonealaram Firewall . After Installation of firewal...
Hi There,
I was hoping if some can help with a problem I'm having. Basically I cannot make a VoIP call from one office to the other. Below are the details of the setup/config and I'm at a l...
Hi,
I have reset the sic on the passive node of the cluster and lost all connectivity as the firewall has installed the default policy. The only way can connect to voyager or ping the inter...
