hi
how i can reset password for cisco switch 2950 and 2960 (line console password and enable password) I can not enter to enter to switch
thanks
Hello All.
I have a interesting probem. We have a client trying to access another client's ASA 5510 using Cisco VPN client. The client terminates with Reason 433. This has been going on wi...
One of my users has been having some issues getting to websites. The user is connecting via cisco systems vpn client on vista sp1. He's connecting to a Pix 506E. The VPN is setup to use spl...
I have a static VPN tunnel and am trying to get traffic to pass between (DMZ:4.1.0.0/16) FW01 <--> FW05 (Insiide:7.1.1.0/24).
I get the following error messages on FW01 (ASA 5510 v8.03). ...
Cisco ASA interface issues with VPN
I have the attached config. With this config:
I can ping the outside interface from the internet.
I can telnet and ssh to it.
I cannot RDP through it...
Hello All,
I have a ASA 5505 that has been working great for a few years with 2 VLANs configured. One for the outside (216.64.x.x) and one for the inside (192.168.0.1). We recently installe...
It's simple, how do I hard reset my Cisco ASA 5505. I found different procedures for restoring via CLI etc. There's nothing on how to use the RESET button in the back.
Hi
I'm having problems setting up multiple IP addresses on my ASA 5505.
I have 8 IP's assigned to my connection
I've created a static NAT and allowed https connection to the IP but I ca...
Hi,
I'm replacing my (2) Cisco Pix 515 firewalls with (2) ASA 5520's (running v8 firmware). The only task I have left is to configure them for Active/Standby failover config. I have gone th...
I have a internatl web server on port 80. I can access the server externally just fine but not inside my network. We have just install a cisco ASA5505. Please advise. below is a clean conf...
Hopefully a nice and simple one; what is the recommended way to check the current status and/or uptime of a given tunnel through the CLI?
J.
I have setup local users on the ASA device. I have enabled SSH, HTTPS, Telnet to authenticate from the local user database. When they telnet/ssh into the device, they are properly prompted f...
Once I reset my ASA 5505 to the factory default, I either don't have the right device IP address (tried 192.168.1.1) and/or the wrong username and password. I tried leaving both blank, then ...
Hi, I use CCNA Network Visualiser and Boson NetSim to simulate training of CISCO Routers and Switches.
Can anyone recommend a simulator for Pix Firewalls ?
My office currently has 3MB internet. Access to the outside first passes through a Cisco Pix515 and then on to a 2600. We host a few public servers on our internal network with access lists ...
I have a cisco asa 5505 to configure. i am having a problem locating where to setup multiple ip address from my isp. i would like to setup all my outbound traffic for .35 and my mail and web...
I recently installed an ASA 5540 to replace my PIX 525. I have setup the client-side VPN with Windows IAS/RADIUS to authenticate users against AD and to push DNS and WINS addresses that are AD...
Hi,
I need to setup a Cisco 877 in bridge mode, its connecting into a watchgaurd firewall which is setup to recieve its details via PPPOE
I have setup the 877 is bridge mode,
Config:
...
I have a question related to the configuration below. I have a live ASA 5520 and another ASA with a default configuration. What I need to do is have the Lan/stateful failover occur on the Mana...
I've got a Cisco ASA 5510 and a 2900 router. I need to know what would be the best way to track bandwidth used by ip address.
Can anybody suggest/recommend something to try out?
We've g...
I am trying to setup my new ASA 5505 (ASA 7.2(4) + ASDM 5.2(4)) basic license.
One slight problem I noticed is that the examples given in the "Getting Started Guide software version 7.2" do...
Sir,
We have proposed Fortinet 310 B , for a customer with 4 MBPS Leased Line and 120 users in a Lan environment , Now someone has placed ZyWall as an alternative, Please Advise on the basi...
I tried to setup a VPN SSL Client on ASA 5520 as stated in the link below:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml
WebVPN works fin...
I've setup a Cisco ASA 5510 as our Firewall security for our network. I had configured the asa for telnet access on the inside interface of the network, but for some abrupt reason, I am unable...
Hi Experts,
I have a Cisco PIX 515E at our main site and we are using an ASA 5505 at our telecommuters site. I have set it so that VPN works fine and our user can access internal network, f...
