Most of our WAN is connected into an MPLS cloud (managed solution with routers configured by ISP). Our head office also has a coule of branch offices which connect via VPN from Cisco PIX 506E...
i need to setup a site to site vpn between a pix 515E and an ASA5510.
i have done the follwing and only get the pix to see the ASA but the ASA does not see the pix.
see code attached
...
I have Symantec Web Security on one of my servers and currently there are proxy settings in everyone's web browser. There is supposibly a transparent proxy mode where you don't have to enter ...
We have configured a 506 pix for VPN using PPTP. The connection to the PIX gets established without a problem. Once that is done we cannot connect to or ping any resource on the internal net...
Hi there,
Trying to configure remote access VPN on PIX 515E with os 6.2(2).
PIX is behind a router with the following config:
Current configuration : 1648 bytes
!
version 12.4
no ...
This message is spamming our ASDM.
I am attempting to replace a Netscreen, which is the firewall for the main internet line with an ASA 5505(192.168.1.5). I have a second ASA (192.168.1.250) which is on a seperate internet line...
So... title says most of it.
VPN clients are connecting using Cisco VPN Client 5.X and are leasing DHCP addresses; they are receiving the proper DNS server, WINS server, and IP config... th...
HI Team,
I have a challenging Issue here, We have a source trying to connect to the Server in the inside network.
Source: 10.11.5.173 ( WYSE TERMINAL), Destination : 10.10.10.170
As sou...
I need to copy the running config of our PIX 506 to our tftp server so I have a backup of the configuration I also need to know how to restore the configuration from a tftp server
Help...
We have a Cisco Pix 501 C using 6.2 - We have purchased a new phone system that requires the we open ports 5000 through 6200 UDP for voice packets. I received some help on opening these porst ...
So i have to replace my nice little dlink router/FW with a cisco PIX 501 (i need the VPN stuff)
I have installed it and everything appears to be working.
I took the default settings of t...
We have a brand new ASA5510 and we are trying to access the GUI, but I guess its missing this binary file and I am trying to send the file to the firewall. Does anyone have the command line t...
At my corporate office we have a PIX515 acting as both the firewall and vpn concentrator. I have purchased an ASA 5505 to test with. I have it in a lab environment right now which uses DSL. It...
I think I'm having some ACL issues. Attached are the config files. Any ideas? I would like the remote 172.31.12.0 network to be able to access all of the 172.31.0.0 networks. I found a very si...
I have been unable to telnet or SSh to the PIX ( I can web in) I get to the login screen and it asks me:
"login as:"
I tried putting a username and password but that didn't work What do I do?
Hello,
I'm new to the Cisco PIX Firewall and have a config question. The config is set for VPN and it appears split tunnel. The VPN client connects just fine, but I cannot access the LAN (thr...
I have CISCO PIX 515E with firewall version 6.3 and PDM version 3.0(1) at my two sites. We have site to site VPN. I want to upgrade those both sites to CISCO ASA. Below is my show vesion outpu...
Hello:
We got ASA 5510, configured to accept VPN connections (with Cisco Vpn Client).
I used to get the login window with 2 fields (UserName and Password).
Now I'm getting 3 fields (Usernam...
Hi Everyone
I need to have a Read Only SNMP string to the PIX for one of my client managers the PIX inside interface is 172.21.100.x the manager computer is 172.21.104.x how to cconfigure th...
My customer have a Cisco PIX 501 and the users has a Cisco VPN Client to connect to the office LAN from remote sites. That works so far.
Local LAN: 192.168.22.0 (255.255.255.0)
VPN clien...
Configuring a site to site vpn tunnel using a Cisco ASA 5510 & a Linksys BEFSX41. The Linksys is connecting to the Cisco. All network resources (SMTP/POP3 srv, DC, etc..) are behind the Cisc...
We have an 'attacking' IP, originating in China, which is successfully getting through to one of our servers even though the IP is clearly blocked on the firewall. It is a general block for t...
I have pc 192.168.1.10 behind PIX 7.2(2) .I am not able to ping www.google.com from it although I have allowed
ICMP ANY ANY for this PC.
What needs to be configured on firewall for th...
Hello All,
I am trying to set up bandwidth monitoring on the outside interface of an ASA. my question is what commands would I use to do this? Thank you.
