New Cisco ASA 5510. I have several internal Terminal Servers that I need to access via the internet. The problem is that I only have one public IP address. I can do a translation from publi...
Hi experts, I'm very new to ASA5510 configuration (I use ASDM GUI mainly) Here's my problem as clearly as I can explain it::
I can access ASDM for the firewall management via VPN, but I can...
Hi,
My setup (fake addresses):
(ISP Router)
200.200.200.9/30
|
|
200.200.200.12/30
(ASA Firewall)
|
|
192.168.0.0/24
(LAN)
I am setting up static NAT :
static (inside,ou...
both ASA's are running 8.2(1) with deivce manager 6.2(1)
I am fairy new to Cisco ASA and i have found lots of information on this site pertaining to my problem, but have yet found a solution....
HI
I have the below working config on my cisco asa.
however when I try to use telnet to acces the device when on the VPN it does not connect.
VPN is fine and so is all network functions fro...
The purpose of my question is to receive expert opinion on which of two approaches is superior for configuring authentication against Windows Active Directory through a Cisco ASA5510.
We'd ...
Hi,
The setup:
200.200.200.9/30
|
|
200.200.200.12/30
(ASA Firewall)
|
|
192.168.0.0/24
(LAN)
200.200.200.10 static NAT to 192.168.0.209 / 200.200.200.11 static NAT 192.16...
Hi,
I'm trying to build a LAN-to-LAN VPN Tunnel between my Cisco ASA 5520 and a Cisco ASA on a remote LAN.
I have rebuilt the tunnel numerous times and I am currently receiving th below ...
I would like to know how to configure my ASA 5505 to work with my existing Comcast DSL modem. Currently what I have is a Comcast DSL modem plugged directly into a layer 2 gig E Switch. What I...
GNS3-Set up VPN on Cisco Router/Pix Firewall.
I have CIsco router and PIX firewall on GNS3 simulator.
First I need to know if Cisco VPN is configured on a Router or PIX firewall. Then how ...
Hello Experts
im trying to get netflow packets from my border internet router through my asa to a netflow collector on the inside network. im receiving hits on my access-list on my asa....
a...
I have problems with gaining access via Web browser to my Cisco PIX 501's. My first issue is with Java. It seems that the newer Java does not connect to the PIX correctly. Java 1.4.2 seems ...
We've previously used Cisco VPN to connect to our PIX 501 using Windows XP, but now I see that Cisco VPN doesn't work with Windows Vista 64 bit. Since my only option is Cisco's AnyConnect, wi...
I was attempting to change the interface access (Device Config) that will allow ASDM, SSH, and telnet access to one of our ASDMs. We had an entry such as:
10.103.0.0/255.255.255.0
yet,...
I have a ASA 5510 and I am looking to upgrade the software, while I know the actual process is relatively trivial (upgrade, reload bla bla bla) I want to make sure I have all my basis covered ...
Hello All,
i need clients on 10.1.1.0 subnet (Gateway 10.1.1.1)to go out on the internet
to use either (ip address dsl1 192.168.254.253
ip address dsl2 172.16.17....
I have Cisco ASA5505 device, when i power it up and connect via console, i find that it is continously rebooting itself, i can see it loading flash image and after that the screen just running...
I'm setting up a newly acquired Cisco ASA 5510 and am having some interesting results when attempting to assign static IP addresses to some hosts.
I was under the impression that once you...
I used the CISCO ASA 5505 GUI and did a Backup of configuration I also copy the configuration using the command line to a text file.
Then I did Lot's of changes to the Firewall, that I don't...
Hi Experts,
Just wondering what is the command to copy a folder (not a single file) in flash:/ to tftp server ?Thanks
Utilizing an ASA 5510 on my side and a 5510 Security Plus on the other end with a site-to-site VPN tunnel.
On one of the computers I allow to be routed via the VPN connection, I utilize a p...
I have a problem, i have an ASA Cisco and a Cisco Router 817,
bettween this devices is a VPN tunnel via Internet.
So on the ASA Side is a Communication server what is sending Broadcast
and...
Hi Experts,
We are not very sure if the Cisco ASA5510 (mfg's part# is ASA-5510-BUN-K9) is the right model for our site-to-stie VPN solution. Site A is with 50 users while site B about 25.
1...
I've added a new internet connection to route traffice for workstations in my network. I want to run simultaneously. I have a cisco ASDM with multiple ports. I'm using 0/0 and 0/1 for my curre...
We have implemented an 8e6 web content filtering solution for one of our offices. The content filter acts as a passive device on the network by monitoring traffic through a switchport span se...
