I currently have a dynamic L2L tunnel built and working between my corporate office and the remote office. The tunnel drops on a frequent basis and I'm trying to find out why. The only thing I...
Inherited Cisco Pix 506e from previous integrator. Familiar with several other competitors, but not this. Need to see if port 22 is already open outbound or will have to open it. Is there a...
Hello Experts,
I'm currently trying to configure a site-to-site VPN between my PIX 8.0(2) with a static IP and Juniper Netscreen 5GT with a dynamicly assigned IP.
Does anybody implement...
I've been trying to set up a site to site VPN between 2 locations using two PIX 506E units with OS version 6.3(5). I'm able to successfully establish a tunnel, but I can't pass traffic between...
I am having a problem with our ASA. I have compared my config to another ASA line by line to try and figure out what is going on, but I can't put my finger on it. I have created a VPN connec...
i have Cisco FWSM ver 3.2, im trying to add access-list but i get this error message
any one can help , pls
ERROR: Unable to add, access-list config limit reached
We have certain applications that are unable to send through the Cisco ASA firewall. Want to prevent the ASA from looking at SMTP. I think in the past it was call fixup, I think this version...
I recently replaced my Pix525 ver 7.0 (4) to a ASA5520 ver 8.0(2) failover Active/Active
Since replacing this, the Pri ASA will randomly reboot and failover to the standby. There is no ne...
Hello Experts,
I have attached my config for your review. As you can see, 16thfloor interface is 192.168.2.0 and engineering interface is 192.168.1.0 (vlan2). Both of these networks needed ...
Hi,
at present we configured one Global outside IP in our ASA.
We would like to configure Second Global IP for one specific inside IP subnet
we are using 192.168.0.0/16 as our inside...
I want to block all outbound ports, then open only ports I need like 80, 8080, 5001, 443 and so on.
When users are trying to connect to a remote VPN server from inside our network they are getting the followin error. (we have a asa 5505)
Error 806 the vpn connection between your computer ...
I've just configured my server with new certificate and now I'm not able able to access "https://mail.domain.com/exchange" it's always timing out waiting response
I tried to telnet to the "...
I have an ASA with more interfaces.
Two Interfaces are
TRANS 192.168.100.3/24 and
O-COMPANY 10.101.5.4/24
What is this Command realy doing
static(TRANS,O-COMPANY) 10.201.1.0 10.201....
Hi everyone
We have jsut bought two Cisco ASA 5510 to act in a Active/Passive failover pair.
On booting up the second unit it has an amber light on the Status light, which im led to beli...
Hi,
I'm trying to (ultimately) set a VPN over a second internet connection on my ASA 5505 with a Base license but there seem to be problems with getting the routing to work.
As a test I...
I had an ASA from a vendor that came without any IOS. I'm in the rommon mode now and trying to transfer the IOS using xmodem method. But the command xmodem is not coming up ? Is procedure of X...
I have an ASA configured with a couple of point to point tunnels and I have just created a client vpn tunnel but for some reason I can not pass traffic through the client. I can login with no...
I am using Cisco ASA 5510 and would like to block gnutella/limewire traffic. The specs for ASA states that it can P2P traffic via Application Inspection.
Can anyone point me to how that can b...
Dear Experts,
I'm in the process of brain storming how I want to set up a DMZ on my ASA 5510. We'll be doing some network changes and I want all my web servers to sit on the DMZ. I posted m...
I have a PIX 515E running 6.3 software. I can ping the outside DNS server successfully, I can ping the inside network successfully. The inside network can ping the pix but not the outside dn...
I have a vpn group setup on a PIX V 7.2 where remote client can connect to it through vpn cleint on xp machines. I have got some people who have 64 bit vista where vpn client 5 won't work. It ...
I know Cisco's management software (i.e. SDM, ADSM) usually doesn't run on Mac OS X (or at least not properly) and I was just wondering if anybody else has suggestions about good management so...
I have a network on a remotely connected WAN that I wish to allow access to from a IPSEC VPN session (Cisco client)
Network looks a little bit like this
Internet -- Outside Router -- PIX...
Experts- I have been assigned to setup VPN on DSL site so that a printer on the DSL site can establish a connectivity to corporate network domain. I am new to this technology..I have been stru...
