Advertisement

Experts have come up with some helpful tips for getting a solution to your problem fast.

 

Welcome! If you have any general questions about Experts Exchange, feel free to ask me.

 
Top Cisco PIX Firewall Solutions: 101 - 125 of 456
 
I am new to this cisco webvpn always used the client in the past and present. Someone has requested the webvpn and i am complete stuck. Any help is greatly appreciated. I would like it to ...
I've done this before on cisco routers, but it's been awhile and I need a refresher. I have a tftp server set up (I think). Let's say I have a Cisco ASA in place and I want to use this tftp se...
We have multiple sites connected via an MPLS Connection.  My Main site has an ASA 5520, but the MPLS is connected to a Layer 3 switch which is then connected to the inside interface of the ASA...
I have been trying to switch from Netgear router to an ASA 5505 for over a week now and I have to admit defeat.  I am a novice at configuring a Cisco devices but I thought the graphical interf...
I have problem to ping from one subnet to another subnet Situation: I can ping to 192.168.11.0/24 from PIX User in 192.168.10.0/24 can ping to 192.168.11.1 when gateway is set to 192.168....
I have a Cisco ASA 5510 that is already setup and in production. The 6+ servers behind the device all NAT to the IP address of the external interface, 69.7.19.18. We have 5 satellite sites tha...
We have been using a product called CMS XE-Filter to block spam by Country IP addresses.  This worked extremely well for us, but we have moved to Exchange 2007 on a Windows 2008 server and the...
hi, Is there any way to break pix firewall password without using any flopy disk or software?
Usign a Cisco ASA version 7.0 Having to add a new NAT statement againt an inteface to allow "interestign " traffic to go down a VPN. When I try to add the following line                  ...
Hi There, I am currently trying to configure an ASA 5505 as a firewall on an ADSL line but are unable to browse the internet from a PC behind the firewall or ping any external addresses inc...
Hi all, I have the following problem and I am stuck at the moment and cannot find out how to solve this: I have a PIX 525 at the main site where multiple 506 PIXes are connected with Sit...
When Cisco VPN clients connect to the ASA5510, they successfully authenticate and the tunnel is established. However, they cannot ping or access hosts on the remote LAN subnets  192.168.3.0/2...
I have a Cisco PIX 515 in place at my office.  I average about 30-40 remote users daily. Our current VPN connection is the Windows remote access server on a windows 2003 server.   I wou...
I bought a new 4506-E recently. I just finished setting it up at our COLO. I have all my routes setup in the firewall I also have all traffic routed to the firewall from the 4506. I set up 2 V...
hi experts...                         for practice  is there any software for ASA & pix  like dyngen for routers. or any website where i can practice online for such tpe of devices. all rep...
I have a site to site vpn setup between my pix515 (corporate) and an ASA5505 (remote office). From the ASA side I can ping hosts at my corporate office, but from the pix side (corporate office...
Hi, I'm a newbie on ASA configurations. We've a ASA5505 with Security Plus license running ASA 7.2(4). I'll try to explain how I want to setup the device; We've two public IPs x.x.x.241...
Hi, I'm trying to restrict access to VPN-Clients on a Pix by restricting NAT exemptions. it works fine if i use IP and the whole subnet, but i want to restrict down to a port / protocol leve...
I have a server that has 2 NIC cards in it.  One NIC is plugged into our first ISP via T1.  the other NIC is plulgged into a cable modem.   I would like to be able to access this server from t...
I just installed a Cisco ASA 5505 on my network. I haven't changed any of the default access rules or filter rules. I can access the Internet just fine including the Microsoft Windows Update s...
Has anyone successfully configured Microsoft IAS to send the Cisco Radius Privilege-Level 220 attribute to an ASA with firmware 8.0 When a user telnets into the ASA they should be put into ...
I am having trouble getting DNS to work. I recently upgraded from a PIX 515 to teh ASA 5510 and there must be something different about the ASA because nobody from the outside can get a respon...
Hello, Ive hear that you can use the Cisco ASA's Advanced HTTP Inspection for blocking things like Real Player and Windows Media Player streaming audio. Does anyone know how to do this, or...
I am having problems connecting to ftp sites going through the cisco asa 5510.  I have all outbound traffic opened but it can't reach the site.  The problem is with ftp sites but for example t...
I have a Cisco ASA 5505 and Cisco client 5.0.03 - I am unable to see the inside network although I can connect to and send/recv traffic.  I have tried enabling for Nat Traversal but that didn'...