I Think this will work I just want a second opinion....
ASA5510 - version 8 Base License
Essentially Im using a free outside IP address and Port forwarding different ports to different int...
Some mail's are blocking by my CSC installed in one CISCO ASA 5520,
the mensage that the user receive are:
This message contains content that is prohibited by organization policy. The mess...
Hi,
I'd like to configure the AUX port on a Cisco ASA 5550 to connect to a switch's console port. Here is an old example that shows how to do this on a router/PIX config (however the PIX i...
Hi Experts,
I know that Cisco VPN Client won't support 64bit Windows any way. But is there any work around to run this on Win7 64bit ???
Any help would be greatly appreciated & Thanks !
Hi all--
I'm trying to erase the current config on a Pix 525, and I can't seem to get it done. There's no "erase start," "delete start," or "write erase" command. I cleared the flashfs, b...
hello, i have a question regarding my asa 5505 setup.. below is a configuration that does not work, unless i change the static route from
route outside 0.0.0.0 0.0.0.0 12.*.25.209 tunne...
I have a PIX 525 running release ASA 7.2(3) trying to connect with Vista x64. What client can I use for VPN access. The Cisco VPN client does not work with VISTA X64 and I tried Any Connect f...
I have an office with 2 internet connections, ISPA and ISPB.
ISPA handles all internal internet traffic by nating 172.17.2.0/24 -> 172.17.2.1
ISPB handles all internal voice traffic by...
Network lost internet access. Looked at the ASA and the syslog states:
Deny UDP reverse path Check from 169.254.68.175 to 169.254.255.255 on inside interface.
An attack is in progress.
Wh...
I want to restrict inbound mail to my Exchange server (10.0.0.10) so that only mail from our Postini mail filter service can get through port 25. The Postini range is 64.18.0.0 - 64.18.240.0. ...
I need to allow only smtp traffic through our ASA to our smtp sever behind the inside interface. I believe I have it but since I'm new to the Cisco world, I wanted to verify that I have it co...
Welcome,
I replaced old Cisco Router with new ASA5510. Looking at the network diagram shows that a LAN address is 172.30.16.0/24. All users to the web goes through a proxy server (172.30.16...
I have a Dynamic L2L tunnel between my corporate office (ASA 5520) and a remote office (ASA 5505). The tunnel is working as intended, but every 24 hours the tunnel drops and reconnects 5 minut...
I am getting a vulnerability scan from a 3rd party company called Trustwave (that audits company network) on a Cisco 506e PIX
Failure:
The remote host is a VPN concentrator that supports...
I'm having trouble getting an ASA 5505 device to connect to my PIX via an l2l tunnel.
The errors I receive at the ASA
Sep 04 11:58:14 [IKEv1]: Group = xx.xxx.xxx.199, IP = 75.xxx.xxx.199, ...
Hi Cisco experts,
I have implemented Clientless WebVPN on my Cisco ASA5510. I have customized my logon page, create bookmarks, etc.
When I logon on to my portal I have http/https acces...
HI all,
Users who connect to our office via VPN can't access the internet. However when they disconnect from the VPN they can access the internet. We have a PIX 515e appliance and we are us...
If I set the logging level for a particular ACL on a PIX to Informational/Level6 for example, and the overall logging level of the PIX is set to just Critical, will those ACL 106100 log entrie...
Hi Experts,
I need some insight on the alias command on the PIX. Currently we have our external IP addresses staticed to internal IP addresses. So when I do a dnslookup for our domainname.c...
After upgrading to ASA version 8.0(3) im having problems with sip traffic.
I can recive calls but i can not call out anymore meaning the people can hear me but i cant hear them.
ASA ...
We are looking to test a new Internet Connection. We have Existing PIX (PIXA) On Network 10.1.x.x configured with ISP A and it talks via VPN to a remote office 10.2.x.x. A PC Configured to use...
Hello all, I'm having trouble with an ASA 5510, 8.2(1), and the AnyConnect client. Client connects fine, accessing internal resources is fine, but no internet access will work. Clientless ss...
I have a quick question about nat. I have been given public address range to do nat for my site. As our address overlap with the entity we are connecting. I am basically setting up a new outsi...
Hi,
I am trying to configure OWA and OMA on our exchange 2003 box, I have made changes to our firewall and the config is posted below.
The adddress is http://mailserverone.wisemanlee.co....
Configuring PIX for the first time here to replace an old security box. I need to allow ICMP from the outside world to an IP address. Problem is the IP address that needs to be allowed is stat...
