I have a new workstation that I just installed. It is identical to all of the others I have in my office, but this one, after setting up the "Allow remote users to connect to desktop", immed...
Try to block a user from the inside to an IP on the out side.
I entered the following line
access-list PUBLIC_DMZ extended deny tcp host 172.16.100.22 255.255.255.255 69.63.186.36
I w...
We have a Cisco Pix with Version 6.0(2) for our firewall. We were advised that port 5060 for sip is not working from our vendor. Below is the Code, all ports are open. I dont see whats bein...
I have a Cisco ASA 5510 firewall with an outside interface of 24.75.13.4. It works fine for traffic going to the default gateway (24.75.13.1). I need to place a host on the outside network, ...
Hi Experts !!
I have just removed the below static NAT statement from our Cisco FWSM (ver 3.1) firewall context, but am still able to ping the NATd IP address ( 10.223.253.20) for the interna...
I am setting up a VPN link between our HQ and a remote site using an ASA 5510 (IOS 7.0 (8) ) and an 1841 router. I have been using an example config off cisco.com as the basis for my configura...
HI, i need do remote access to my network throught a Cisco asa 5505, but when connect i don't have access to normal internet.
I setup it with wizard and marked the option for split internet a...
We have two Cisco ASA 5505's at two of our sites and I want to enable what I've been told is called hair-pinning on them. We have a single static IP on each site and we access resources intern...
We have a VPN client to PIX 515e which is very slow when using low bandwidth tools like RDP.
VoIP calls timeout. Ping to internal hosts is intermittent.
I have tried everything that I c...
I have got to work on already configured PIX and having some issues.
I am not able to ping any host in DMZ from Inside network.
I want to make sure that DMZ can access only mail server i...
I've made some recent changes to my running config to restrict port 25 to accept incoming mail only from Postini (spam filter). I though I had it fixed, but spam is still getting in without go...
I have an e-mail that enters my network, the e-mail is encrypted and has a .gz file attachment. When the e-mail arrives into the user's inbox the encryption is removed and the .gz file is str...
I am looking for some guidance on the pros/cons of the ASA vs the Catalyst 6500.
I have been using an ASA5520 for some time and am very happy with it, but my concern is over the physical po...
I have configured this device and all is working but I wanted to see if someone here could help just review the configuration to make sure it is still secure. Any advice would be appreciated ...
Hi,
I am creating an additional outside interface to connect to another enitity for security reasons has to be segragated from our current outside interface. I have pix 515e and i have cre...
Hi guys,
I'm aware that the Cisco VPN client does not support 64 bit operating systems, and with our ASA this has never been an issue because of AnyConnect...
Another office branch has a...
Hi,
1) I need to get clarification, confirmation and explanation (from the experts) related to Cisco VPN Configuration (Cisco ASA5500)
2) Would you please explain the meaning and the goal of...
How do I configure my PiX 506 to port forward TCP port 80 and port 443 to a internal exchange server ?
Please give me the command to enter via the CLI
500pnts
Cheers
Ian
here is my situation. I have a static lan to lan tunnel between my corporate office in Ohio and an office in Chicago. My corporate office is using an ASA 5520 and the remote side is using a 55...
I'm working on a Cisco ASA 5505. I need to open a port, and have it so it connects to a specific machine.
Being new to doing this, I'm hoping I could get some direction.
OK, so I am confused. I have a PIX-501 which is set up correctly. I was going to block a number of websites using their IP addresses so I entered an object group followed by the list of ip add...
I recently upgraded my ASA 5510 from 7(1).1 to 8(0).4. After upgrading we became aware that we were not able to RDP to any of our internal servers. We then started getting reports from our cus...
I am putting in a remote solution via citrix access gateway for 10 users setup is like this
Outside DMZ ...
I would like to be able to blacklist entire e-mail domains in the CSC.
How would I accomplish this?
Thx,
B.
Hello all-
I have an SSL Web VPN setup via my ASA5520 using the anyconnect client. Upon connection I have full access to my default VLAN on my network at Work. My problem is that I cannot...
