Advertisement

11.20.2007 at 10:19AM PST, ID: 22973392
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

7.8

Cisco PIX 501 Client VPN Problem!

Asked by magnus911 in Cisco PIX Firewall, Virtual Private Networking (VPN), Networking Hardware Firewalls

Tags: , , , ,

Hi, long time viewer, first time poster!

I have set up a site to site Cisco VPN for a client, but am having a couple of issues. I am only concerned with one part of it at the moment because until I test this succesfully I cannot connect this new connection and Cisco Box to the main network.
I have a new SDSL connection, and have configured a PIX 501 with a public IP. I can sit behind it and access the internet.

At the moment however, when i try and use the CISCO remote VPN client to connect to it  I can't. I get the following in the log:
Cisco Systems VPN Client Version 4.8.02.0010
Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 2

691    18:15:54.828  11/20/07  Sev=Info/4      CM/0x63100002
Begin connection process

692    18:15:54.828  11/20/07  Sev=Info/4      CM/0x63100004
Establish secure connection

693    18:15:54.828  11/20/07  Sev=Info/4      CM/0x63100024
Attempt connection with server "217.144.147.66"

694    18:15:54.843  11/20/07  Sev=Info/4      IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 217.144.147.66

695    18:15:55.250  11/20/07  Sev=Info/4      IPSEC/0x63700008
IPSec driver successfully started

696    18:15:55.250  11/20/07  Sev=Info/4      IPSEC/0x63700014
Deleted all keys

697    18:15:55.937  11/20/07  Sev=Info/4      IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, VID(Xauth), VID(dpd), VID(Unity), VID(?), KE, ID, NON, VID(?), VID(Nat-T), NAT-D, NAT-D, HASH) from 217.144.147.66

698    18:15:55.937  11/20/07  Sev=Info/4      IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to 217.144.147.66

699    18:15:55.937  11/20/07  Sev=Info/4      IKE/0x63000083
IKE Port in use - Local Port =  0x0B80, Remote Port = 0x1194

700    18:15:55.937  11/20/07  Sev=Info/4      CM/0x6310000E
Established Phase 1 SA.  1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system

701    18:15:55.937  11/20/07  Sev=Info/4      CM/0x6310000E
Established Phase 1 SA.  1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system

702    18:15:55.953  11/20/07  Sev=Info/4      IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 217.144.147.66

703    18:15:55.968  11/20/07  Sev=Info/4      IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from 217.144.147.66

704    18:15:55.984  11/20/07  Sev=Info/4      IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 217.144.147.66

705    18:15:55.984  11/20/07  Sev=Info/4      CM/0x63100019
Mode Config data received

706    18:15:55.984  11/20/07  Sev=Info/4      IKE/0x63000056
Received a key request from Driver: Local IP = 192.168.17.18, GW IP = 217.144.147.66, Remote IP = 0.0.0.0

707    18:15:55.984  11/20/07  Sev=Info/4      IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 217.144.147.66

708    18:15:56.031  11/20/07  Sev=Info/4      IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:NO_PROPOSAL_CHOSEN) from 217.144.147.66

709    18:15:56.031  11/20/07  Sev=Info/4      IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, DEL) to 217.144.147.66

710    18:15:56.031  11/20/07  Sev=Info/4      IKE/0x63000049
Discarding IPsec SA negotiation, MsgID=EB4C9C43

711    18:15:56.031  11/20/07  Sev=Info/4      IKE/0x63000017
Marking IKE SA for deletion  (I_Cookie=A7EBC229B7E5D221 R_Cookie=E76DC8D38E01865F) reason = DEL_REASON_IKE_NEG_FAILED

712    18:15:56.250  11/20/07  Sev=Info/4      IPSEC/0x63700014
Deleted all keys

713    18:15:59.250  11/20/07  Sev=Info/4      IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=A7EBC229B7E5D221 R_Cookie=E76DC8D38E01865F) reason = DEL_REASON_IKE_NEG_FAILED

714    18:15:59.250  11/20/07  Sev=Info/4      CM/0x63100012
Phase 1 SA deleted before first Phase 2 SA is up cause by "DEL_REASON_IKE_NEG_FAILED".  0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system

715    18:15:59.250  11/20/07  Sev=Info/4      IKE/0x63000001
IKE received signal to terminate VPN connection

716    18:15:59.250  11/20/07  Sev=Info/4      IPSEC/0x63700014
Deleted all keys

717    18:15:59.250  11/20/07  Sev=Info/4      IPSEC/0x63700014
Deleted all keys

718    18:15:59.250  11/20/07  Sev=Info/4      IPSEC/0x63700014
Deleted all keys

719    18:15:59.250  11/20/07  Sev=Info/4      IPSEC/0x6370000A
IPSec driver successfully stopped



here is my cisco config:

londonpix# show run
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 1iwWUtCZbeXI9x7r encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname londonpix
domain-name ciscopix.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 192.168.16.2 mail
name 192.168.1.0 Munich-Lan
name 192.168.15.0 munich
name 212.202.225.34 munichpix
object-group service Webmail tcp
  description Secure webmail access
  port-object eq www
  port-object eq https
  port-object eq smtp
access-list inside_outbound_nat0_acl permit ip any 192.168.17.10 255.255.255.254                                                                              
access-list inside_outbound_nat0_acl permit ip 192.168.16.0 255.255.255.0 munich                                                                               255.255.255.0
access-list outside_cryptomap_dyn_20 deny ip any 192.168.17.10 255.255.255.254
access-list outside_access_in remark Remoteweb workplace
access-list outside_access_in permit tcp any eq 4125 any eq 4125
access-list outside_cryptomap_20 permit ip 192.168.16.0 255.255.255.0 munich 255                                                                              .255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 217.144.147.66 255.255.255.252
ip address inside 192.168.16.253 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool remote 192.168.17.10-192.168.17.21 mask 255.255.255.0
ip local pool vpnpool 192.168.17.50-192.168.17.75
pdm location 192.168.16.0 255.255.255.255 inside
pdm location 192.168.16.0 255.255.255.0 inside
pdm location Munich-Lan 255.255.255.0 inside
pdm location mail 255.255.255.255 inside
pdm location 192.168.17.10 255.255.255.254 outside
pdm location Munich-Lan 255.255.255.255 outside
pdm location munich 255.255.255.0 outside
pdm location munichpix 255.255.255.255 outside
pdm location 0.0.0.0 255.255.255.255 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 217.144.147.65 1
route outside munich 255.255.255.0 217.144.147.65 1
route outside munichpix 255.255.255.255 217.144.147.66 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http Munich-Lan 255.255.255.0 inside
http 192.168.16.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
sysopt connection permit-l2tp
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 20 ipsec-isakmp
crypto map outside_map 20 match address outside_cryptomap_20
crypto map outside_map 20 set peer munichpix
crypto map outside_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp key ******** address 212.202.225.48 netmask 255.255.255.255 no-xauth no-c                                                                              onfig-mode
isakmp key ******** address munichpix netmask 255.255.255.255 no-xauth no-config                                                                              -mode
isakmp key ******** address 0.0.0.0 netmask 255.255.255.255 no-xauth no-config-m                                                                              ode
isakmp nat-traversal 300
isakmp log 1
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash sha
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup users address-pool remote
vpngroup users dns-server 217.144.147.66
vpngroup users idle-time 1800
vpngroup users password ********
telnet 0.0.0.0 255.255.255.255 outside
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group users accept dialin pptp
vpdn group users ppp authentication pap
vpdn group users client configuration address local remote
vpdn group users pptp echo 60
vpdn group users client authentication local
vpdn username magnus password *********
dhcpd address 192.168.16.1-192.168.16.10 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
username lmiles password C2KmXgyDJjL27vvz encrypted privilege 5
username dvago password WXHm1TBh5B6VgDIo encrypted privilege 5
username nlarsen password QtvepTrpg8fR1r86 encrypted privilege 5
username sfallgren password j75viSdKsDioff67 encrypted privilege 5
username treiss password 84cqV/yi9n6c6nuT encrypted privilege 5
username jcgas password uTOiBOn/rmqRSV.v encrypted privilege 5
username akoch password 8KaL7ZAowyWxZxhN encrypted privilege 5
username magnus password qu7pouLeRTTVAQBg encrypted privilege 15
username eyblood password whhCrfoivSj9zJwC encrypted privilege 5
vpnclient server 217.144.147.66
vpnclient mode client-mode
vpnclient vpngroup users password ********
terminal width 80
Cryptochecksum:84c96b4ddd7c308187771c7222aa69e6
: end
londonpix#



I hope someone can help me! It's really doing my head in...I've been working on it for 3 straight days and I have trawled through the internet trying to find out why it won't work. I've tried different clients on different machines too!

Thanks in advance..

Start Free Trial
 
Loading Advertisement...
 
[+][-]11.20.2007 at 11:09AM PST, ID: 20322224

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]11.20.2007 at 11:30AM PST, ID: 20322359

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]11.20.2007 at 08:43PM PST, ID: 20325562

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]11.21.2007 at 01:38AM PST, ID: 20326427

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]11.21.2007 at 03:14PM PST, ID: 20331802

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Cisco PIX Firewall, Virtual Private Networking (VPN), Networking Hardware Firewalls
Tags: pix, cisco, 501, vpn, client
Sign Up Now!
Solution Provided By: brian_36526
Participating Experts: 2
Solution Grade: A
 
 
[+][-]11.21.2007 at 03:15PM PST, ID: 20331808

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]11.22.2007 at 12:56AM PST, ID: 20333333

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20080716-EE-VQP-32 / EE_QW_2_20070628