I just uploaded PDM ver 5.2 to my PIX and Im having trouble getting it working.
Given the following output:
PIX# show ver
Cisco PIX Security Appliance Software Version 7.2(2)
Device Manager Version 5.2(2)
Compiled on Wed 22-Nov-06 14:16 by builders
System image file is "flash:/pix722.bin"
Config file at boot was "startup-config"
Addison-PIX up 17 hours 8 mins
Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 0003.6bf6.c171, irq 11
1: Ext: Ethernet1 : address is 0003.6bf6.c172, irq 10
Licensed features for this platform:
Maximum Physical Interfaces : 3
Maximum VLANs : 10
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has a Restricted (R) license.
Serial Number: 405400750
Running Activation Key: 0xaeeb8b88 0x04133bbd 0x3244a388 0xded9d489
Configuration has not been modified since last system restart.
And
http server enable
http 0.0.0.0 0.0.0.0 inside
What am I doing wrong?
Start Free Trial
