Advertisement

04.01.2008 at 08:37AM PDT, ID: 23286127
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
7.8

line and protocol is down in ASA

Asked by AXISHK in Cisco PIX Firewall

Tags:

My ASA 5505 couldn't connect to the internet.  I have issue "no shut" on interface e0/0 many time but e0/0 is still down again. Any reason cause line protocol and e0/0 interface to down ? What does it tell cause from "down" status on these two interface respectively ?

Many thanks.


 Interface Vlan1 "inside", is up, line protocol is up
  Hardware is EtherSVI
        MAC address 001f.6c3d.c253, MTU 1500
        IP address 192.168.7.2, subnet mask 255.255.255.0
  Traffic Statistics for "inside":
        965 packets input, 124186 bytes
        0 packets output, 0 bytes
        571 packets dropped
      1 minute input rate 0 pkts/sec,  15 bytes/sec
      1 minute output rate 0 pkts/sec,  0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec,  156 bytes/sec
      5 minute output rate 0 pkts/sec,  0 bytes/sec
      5 minute drop rate, 0 pkts/sec


Interface Ethernet0/0 "", is down, line protocol is down
  Hardware is 88E6095, BW 100 Mbps
        Auto-Duplex, Auto-Speed
        Available but not configured via nameif
        MAC address 001f.6c3d.c24b, MTU not set
        IP address unassigned
        253 packets input, 41947 bytes, 0 no buffer
        Received 175 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 L2 decode drops
        0 switch ingress policy drops
        0 packets output, 0 bytes, 0 underruns
        0 output errors, 0 collisions, 0 interface resets
        0 babbles, 0 late collisions, 0 deferred
        0 lost carrier, 0 no carrier
        0 rate limit drops
        0 switch egress policy dropsStart Free Trial
[+][-]04.01.2008 at 01:20PM PDT, ID: 21257740

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]04.02.2008 at 12:01AM PDT, ID: 21260667

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04.02.2008 at 06:29AM PDT, ID: 21262776

Assisted solutions are selected by the member who asked the question as a comment that contributed to their question's solution.

Start your 7-day free trial to view this Assisted Solution or ask the Experts your question.

 
[+][-]04.05.2008 at 03:42AM PDT, ID: 21287690

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04.05.2008 at 12:50PM PDT, ID: 21289367

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]05.09.2008 at 08:17AM PDT, ID: 21533724

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zone: Cisco PIX Firewall
Tags: Cisco PIX
Sign Up Now!
Solution Provided By: bryan_loveless
Participating Experts: 2
Solution Grade: A
 
 
 
Loading Advertisement...
20081112-EE-VQP-42 / EE_QW_2_20070628