Advertisement

04.28.2008 at 10:49AM PDT, ID: 23359557
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

9.4

Cisco ASA 5510 multiple IP's won't ping or respond on outside interface.

Asked by kstauffer in Cisco PIX Firewall

Tags: , ,

Hi all,

I have a range of IP's set to the outside interface of my ASA 5510, and I can not get this additional IP's to ping.  The ip address of the interface will ping just fine, but nothing will ping when I have static entries in the ASA.

I have configured PIX's before and have tried to mimic the PIX and a bunch of other configs to no avail.

Could someone please help?  Here is the config of the ASA.

Many thanks in advance!Start Free Trial
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
ciscoasa(config)# sho run
: Saved
:
ASA Version 8.0(2)
!
hostname ciscoasa
enable password XodgWJ4aP8uoJnLo encrypted
names
!
interface Ethernet0/0
 nameif outside
 security-level 0
 ip address xxx.xxx.xxx.114 255.255.255.240
!
interface Ethernet0/1
 nameif inside
 security-level 100
 ip address 192.168.0.29 255.255.255.0
!
interface Ethernet0/2
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Management0/0
 nameif management
 security-level 100
 ip address 192.168.1.1 255.255.255.0
 management-only
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
same-security-traffic permit intra-interface
object-group service Email tcp
 port-object eq smtp
 port-object eq www
access-list outside_access_in extended permit tcp host xxx.xxx.xxx.116 host 192.168.0.3 object-group Email
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
asdm image disk0:/asdm-602.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) xxx.xxx.xxx.116 192.168.0.3 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.113 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no crypto isakmp nat-traversal
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics access-list
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:83c9659bd59d2fde46f2ae2439a779ee
: end
 
Loading Advertisement...
 
[+][-]04.28.2008 at 11:02AM PDT, ID: 21456090

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]04.28.2008 at 11:28AM PDT, ID: 21456350

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04.28.2008 at 11:33AM PDT, ID: 21456421

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]04.28.2008 at 11:49AM PDT, ID: 21456548

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04.28.2008 at 12:01PM PDT, ID: 21456647

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zone: Cisco PIX Firewall
Tags: cisco, asa, 5510
Sign Up Now!
Solution Provided By: batry_boy
Participating Experts: 1
Solution Grade: A
 
 
[+][-]04.28.2008 at 12:30PM PDT, ID: 21456898

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04.28.2008 at 12:34PM PDT, ID: 21456933

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]04.28.2008 at 12:39PM PDT, ID: 21456974

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20080716-EE-VQP-32 / EE_QW_2_20070628