Advertisement

04.28.2008 at 01:24PM PDT, ID: 23360090
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
9.0

ASA5505 IMAP4 Configuration RE:IPHONE

Asked by davebosco in Cisco PIX Firewall, Networking Hardware Firewalls, Enterprise Firewalls

Tags: , , ,

Having issues configuring access for IMAP4 email on one of my locations servers/firewalls for IMAP4 email access.  to be honest i have never had to support imap email access before, everyone has been satisfied with other protocols.  any help would be appriciated.



Thanks,


DaveStart Free Trial 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:

Result of the command: "sh runn"
 
: Saved
:
ASA Version 7.2(3) 
!
hostname meme
domain-name ya.ta
enable password helllo encrypted
names
name 192.168.2.5 nono
name 192.168.2.0 nono2
name 192.168.2.16 nono3
name 192.168.2.15 nono4
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.2.1 255.255.255.0 
!
interface Vlan2
 nameif outside
 security-level 0
 ip address 1.2.3.4 255.255.255.225 
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd helllo encrypted
ftp mode passive
clock timezone MST -7
dns server-group DefaultDNS
 domain-name nodomain.no
object-group service imap4 tcp
 port-object eq imap4
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq www 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq smtp 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq 3389 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq 8768 
access-list outside_access_in extended permit udp any host 1.2.3.5 eq 8768 
access-list outside_access_in extended permit udp any host 1.2.3.5 eq 3874 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq 51234 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq 14534 
access-list outside_access_in extended permit udp any host 1.2.3.5 eq 8767 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq 3874 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq https 
access-list outside_access_in extended permit tcp any any eq 4125 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq 993 
access-list outside_access_in extended permit tcp any host 1.2.3.5 eq imap4 
access-list inside_outbound_nat0_acl extended permit ip any 192.168.2.48 255.255.255.248 
access-list outside_cryptomap_dyn_20 extended permit ip any 192.168.2.48 255.255.255.248 
access-list nonogroup_splitTunnelAcl standard permit any 
access-list outside_in extended permit tcp any host 1.2.3.5 eq imap4 
access-list in remark rule imap4
pager lines 24
logging enable
logging timestamp
logging trap debugging
logging asdm informational
logging device-id hostname
mtu inside 1500
mtu outside 1500
ip local pool myvpnpool_192.168.2.50-192.168.2.55 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 1.2.3.7 nono2 netmask 255.255.255.255 
static (inside,outside) 1.2.3.6 192.168.2.7 netmask 255.255.255.255 
static (inside,outside) 1.2.3.5 nono netmask 255.255.255.255 
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.43.19.193 1
timeout xlate 0:05:00
timeout conn 0:00:00 half-closed 0:10:00 udp 0:00:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 0:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
http server enable
http 0.0.0.0 0.0.0.0 outside
http lamain 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
 
LEFT OUT ON PURP
 
 hash md5
 group 2
 lifetime 86400
crypto isakmp policy 40
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
crypto isakmp nat-traversal  20
telnet ttttmain 255.255.255.0 inside
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
l2tp tunnel hello 10
dhcpd dns 2.2.2.2.2.2.2.2.2.2.2
dhcpd auto_config outside
!
dhcpd address 192.168.2.2-192.168.2.129 inside
!
vpnclient server 192.168.2.1
vpnclient mode client-mode
vpnclient vpngroup dddd password ********
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect sqlnet 
  inspect skinny 
  inspect sunrpc 
  inspect xdmcp 
  inspect sip 
  inspect netbios 
  inspect tftp 
  inspect http 
!
service-policy global_policy global
group-policy tttgrp internal
group-policy tttgrp attributes
 dns-server value 192.168.2.5
 vpn-tunnel-protocol IPSec 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value nA_splitTunnelAcl
 default-domain value dddr
group-policy lamain internal
group-policy lamian attributes
 vpn-idle-timeout 30
 default-domain value ddd.tv
group-policy you internal
group-policy you attributes
 vpn-idle-timeout 30
 default-domain value dddd.tv
username er password dfdfdfdf encrypted privilege 0
username er attributes
 vpn-group-policy rre
username re password dfdfdfdf encrypted privilege 0
username re attributes
 vpn-group-policy rrre
username dfd password sdfdsddssdfds encrypted privilege 0
username dfdf attributes
 vpn-group-policy rrre
tunnel-group  sdf type ipsec-ra
tunnel-group  sf general-attributes
 address-pool  sadf 
 default-group-policy lamam
tunnel-group  asdf ipsec-attributes
 pre-shared-key *
tunnel-group  sdf type ipsec-ra
tunnel-group sdf general-attributes
 address-pool sdaf  
 default-group-policy Wally
tunnel-group you ipsec-attributes
 pre-shared-key *
tunnel-group sdf type ipsec-ra
tunnel-group sdf general-attributes
 address-pool sdfa
 default-group-policy sdafa
tunnel-group lamain ipsec-attributes
 pre-shared-key *
prompt hostname context 
no compression svc http-comp
[+][-]04.28.2008 at 01:48PM PDT, ID: 21457486

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Cisco PIX Firewall, Networking Hardware Firewalls, Enterprise Firewalls
Tags: cisco, asa5505, asa5505UL-BUN-K9-SEC, imap4 email access configuration
Sign Up Now!
Solution Provided By: stuknhawaii
Participating Experts: 1
Solution Grade: B
 
 
[+][-]04.28.2008 at 01:52PM PDT, ID: 21457517

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04.29.2008 at 07:41AM PDT, ID: 21462717

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
 
Loading Advertisement...
20081112-EE-VQP-44 / EE_QW_2_20070628