[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.
08/19/2008 at 04:11AM PDT, ID: 23659111
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
8.2

ASA 5505 NAT issue

Asked by d3m00n in Cisco PIX Firewall, Virtual Private Networking (VPN), IPSec Security Protocol

Tags: Cisco, ASA, 5505

Hi,

I have two ASA 5505 connected via VPN - Connection is established. However when I am trying to connect from remote site I have on VPN sever errors:
3      Aug 19 2008      12:17:29      305005      192.168.1.207             No translation group found for tcp src outside:192.168.88.53/2939 dst inside:192.168.1.207/44

I believe that here is some misconfiguration issue - but I don't see it.

Please note that users which are connected via Cisco VPN client can access resources they would like.

I'll appreciate any advice. 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:

: Saved
:
ASA Version 8.0(3) 
!
hostname xxxxxxxxxxxx
domain-name aaaa.local
enable password xxxxxxxxxxxxxxx encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address Cisco_FW 255.255.255.128 
!
interface Vlan2
 nameif outside
 security-level 0
 ip address 123.123.123.123 255.255.255.248 
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
boot system disk0:/asa803-k8.bin
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns domain-lookup inside
dns server-group DefaultDNS
 name-server 192.168.1.124
 domain-name aaaaa.local
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_access_in extended permit tcp any host 123.123.123.123 eq ssh 
access-list mobileusers_splitTunnelAcl standard permit 192.168.1.128 255.255.255.128 
access-list inside_nat0_outbound extended permit ip 192.168.1.128 255.255.255.128 VPN 255.255.255.0 
access-list inside_nat0_outbound extended permit ip 192.168.1.128 255.255.255.128 192.168.88.0 255.255.255.0 
access-list mobileuserscontractor_splitTunnelAcl standard permit host 192.168.1.125 
access-list mobileuserscontractor_splitTunnelAcl standard permit host 192.168.1.124 
access-list 192.168.88.0_splitTunnelAcl standard permit 192.168.1.128 255.255.255.128 
access-list 192.168.88.0_splitTunnelAcl standard permit 192.168.88.0 255.255.255.0 
pager lines 24
logging enable
logging asdm debugging
mtu inside 1500
mtu outside 1500
ip local pool mobileusersRmtPool 192.168.66.10-192.168.66.50 mask 255.255.255.0
ip local pool ContractorsRmtPool 192.168.77.10-192.168.77.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-603.bin
asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 0 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface ssh 192.168.1.123 ssh netmask 255.255.255.255 
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 123.123.123.124 1
route inside 0.0.0.0 0.0.0.0 Cisco_FW 2
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL 
aaa authentication ssh console LOCAL 
aaa authorization command LOCAL 
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
crypto dynamic-map outside_dyn_map 20 set pfs 
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
crypto isakmp ipsec-over-tcp port 9999
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 20
console timeout 0
dhcpd dns xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy
dhcpd auto_config outside
!
dhcpd address 192.168.1.170-192.168.1.190 inside
dhcpd dns 192.168.1.124 interface inside
dhcpd domain aaaa.local interface inside
dhcpd enable inside
!
threat-detection basic-threat
threat-detection statistics
webvpn
 enable outside
 svc image disk0:/anyconnect-win-2.1.0148-k9.pkg 1
 svc enable
group-policy mobileusersnew internal
group-policy mobileusersnew attributes
 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value 192.168.88.0_splitTunnelAcl
 address-pools value mobileusersRmtPool
group-policy mobileuserstest internal
group-policy mobileuserstest attributes
 wins-server value xxx.xxx.xxx.127
 dns-server value xxx.xxx.xxx.126
 vpn-idle-timeout none
 vpn-session-timeout none
 vpn-tunnel-protocol IPSec l2tp-ipsec 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value mobileusers_splitTunnelAcl
group-policy WebVPN internal
group-policy WebVPN attributes
 vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
group-policy mobileusers internal
group-policy mobileusers attributes
 dns-server value 192.168.1.207
 vpn-idle-timeout none
 vpn-session-timeout none
 vpn-tunnel-protocol IPSec svc webvpn
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value mobileusers_splitTunnelAcl
 webvpn
  url-list value mobileusersWeb
  svc ask enable default webvpn
  customization value mobileusersWebVPN
group-policy mobileusers_contractors internal
group-policy mobileusers_contractors attributes
 dns-server value xxx.xxx.xxx.126
 vpn-tunnel-protocol IPSec 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value mobileuserscontractor_splitTunnelAcl
group-policy 192.168.88.0 internal
group-policy 192.168.88.0 attributes
 vpn-filter none
 vpn-tunnel-protocol IPSec l2tp-ipsec 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value 192.168.88.0_splitTunnelAcl
 nem enable
username 192.168.88.0 password xxxxxxxxxxxxxxxxxx encrypted privilege 0
username 192.168.88.0 attributes
 vpn-group-policy 192.168.88.0
 vpn-tunnel-protocol IPSec l2tp-ipsec 
tunnel-group mobileusers type remote-access
tunnel-group mobileusers general-attributes
 address-pool mobileusersRmtPool
 default-group-policy mobileusers
tunnel-group mobileusers ipsec-attributes
 pre-shared-key *
 
tunnel-group remote-site type remote-access
tunnel-group remote-site general-attributes
 default-group-policy 192.168.88.0
tunnel-group remote-site ipsec-attributes
 pre-shared-key *
!
class-map inspection_default1
 match default-inspection-traffic
class-map inspection_default
!
!
policy-map type inspect dns preset_dns_map
 parameters
policy-map global_policy
 class inspection_default
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny  
  inspect sunrpc 
  inspect xdmcp 
  inspect sip  
  inspect netbios 
  inspect tftp 
  inspect dns 
 class inspection_default1
  inspect ftp 
policy-map type inspect netbios test
 parameters
  protocol-violation action drop log
!
service-policy global_policy global
 
Keywords: ASA 5505 NAT issue
Title
1 Cisco 1721 IPSec VPN Problem
2 Simple Port forward TCP 80 and 443
 
Loading Advertisement...
 
[+][-]08/19/08 05:30 PM, ID: 22265182

Assisted solutions are selected by the member who asked the question as a comment that contributed to their question's solution.

Start your 30-day free trial to view this Assisted Solution or ask the Experts your question.

 
[+][-]08/20/08 01:36 AM, ID: 22267210

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]08/21/08 09:43 AM, ID: 22281446

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Cisco PIX Firewall, Virtual Private Networking (VPN), IPSec Security Protocol
Tags: Cisco, ASA, 5505
Sign Up Now!
Solution Provided By: d3m00n
Participating Experts: 1
Solution Grade: A
 
 
 
Loading Advertisement...
20090824-EE-VQP-74 / EE_QW_2_20070628