CISCO ASA VPN

Experts,

I have an ASA 5505. I would like to learn how to use this device. Can someone please help me understand the necessay config for remote access vpn tunnel?

Show vwersion:
Hardware:   ASA5505, 256 MB RAM, CPU Geode 500 MHz
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted
Inside Hosts                : 10
Failover                    : Disabled
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
VPN Peers                   : 10
WebVPN Peers                : 2
Dual ISPs                   : Disabled
VLAN Trunk Ports            : 0

This platform has a Base license.

Show start:
ASA Version 7.2(2)
!
hostname ASA
domain-name test.local
enable password E0hVIk.JsyFR6YSJ encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.10.1 255.255.255.0
!
interface Vlan2
 nameif outside
 security-level 0
 ip address dhcp setroute
!
interface Vlan3
 no forward interface Vlan1
 nameif home
 security-level 50
 ip address 192.168.30.1 255.255.255.0
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
 switchport access vlan 3
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd E0hVIk.JsyFR6YSJ encrypted
ftp mode passive
clock timezone CST -6
dns server-group DefaultDNS
 domain-name enterprise.local
access-list outside_20_cryptomap extended permit ip 192.168.10.0 255.255.255.0
92.168.2.0 255.255.255.0
access-list inside_access_out extended permit ip 192.168.10.0 255.255.255.0 192
168.2.0 255.255.255.0
access-list nonat extended permit ip 192.168.10.0 255.255.255.0 192.168.2.0 255
255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu home 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit host *.*.*.* echo-reply outside
icmp deny any echo-reply outside
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0
nat (home) 1 0.0.0.0 0.0.0.0
access-group inside_access_out out interface inside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto map outside_map 20 match address outside_20_cryptomap
crypto map outside_map 20 set pfs group1
crypto map outside_map 20 set peer *.*.*.*
crypto map outside_map 20 set transform-set ESP-DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption des
 hash md5
 group 1
 lifetime 86000
tunnel-group *.*.*.* type ipsec-l2l
tunnel-group *.*.*.* ipsec-attributes
 pre-shared-key *
telnet 192.168.10.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.255 home
ssh timeout 5
console timeout 0
dhcpd ping_timeout 10
dhcpd auto_config outside
!
dhcpd address 192.168.10.2-192.168.10.33 inside
dhcpd enable inside
!
dhcpd address 192.168.30.2-192.168.30.5 home
dhcpd enable home
!

!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:90e569637ae728d91a535fb91dae6b59Start Free Trial