[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.
Question
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
7.8

OWA and Remote Web workplace over PIX firewall

Asked by dcaggiano in Cisco PIX Firewall, SBS Small Business Server

Tags: Cisco, PIX firewall

Hi everyone,
I am having a tough time here.  I am trying to get Outlook Web Access (OWA) and Remote Web Workplace (RWW) to work over a PIX firewall.  The server is running Microsoft Small Business Server 2003.  I have OWA and RWW running on a SSL cert INSIDE of the firewall just fine.  However, once I try to access it through the PIX, I get nothing.  Check out my code below.

Important IP's :  My server 10.100.100.2
                         PIX inside interface 10.100.100.1
                         Our ISP static IP 24.x.x.30
                         Our ISP gateway IP 24.x.x.1

1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:

pixfirewall(config)# show run
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password FQ4orRPEuDfqzY4w encrypted
passwd FQ4orRPEuDfqzY4w encrypted
hostname pixfirewall
domain-name ciscopix.com
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 10.100.100.2 Server
access-list remote_splitTunnelAcl permit ip 10.0.0.0 255.0.0.0 any
access-list inside_outbound_nat0_acl permit ip 10.0.0.0 255.0.0.0 10.100.100.0 255.255.255.224
access-list outside_cryptomap_dyn_20 permit ip any 10.100.100.0 255.255.255.224
access-list inside_access_in permit ip any any
access-list fromoutside permit tcp any host 24.x.x.30 eq 3389
access-list fromoutside permit tcp any host 24.x.x.300 eq https
access-list fromoutside permit tcp any host 24.x.x.30 eq 444
access-list fromoutside permit tcp any host 24.x.x.30 eq ftp
access-list fromoutside permit tcp any host 24.x.x.30 eq smtp
access-list fromoutside permit tcp any host 24.x.x.30 eq www
access-list fromoutside permit tcp any host 24.x.x.30 eq pptp
access-list fromoutside permit tcp any host 24.x.x.30 eq 4125
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 24.x.x.30 255.255.255.0
ip address inside 10.100.100.1 255.0.0.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn 10.100.100.10-10.100.100.20
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 24.x.x.30 smtp Server smtp netmask 255.255.255.255 0 0
static (inside,outside) tcp 24.x.x.30 https Server https netmask 255.255.255.255 0 0
static (inside,outside) tcp 24.x.x.30 3389 Server 3389 netmask 255.255.255.255 0 0
static (inside,outside) tcp 24.x.x.30 www Server www netmask 255.255.255.255 0 0
static (inside,outside) tcp 24.x.x.30 4125 Server 4125 netmask 255.255.255.255 0 0
static (inside,outside) tcp 24.x.x.30 pptp Server pptp netmask 255.255.255.255 0 0
static (inside,outside) tcp 24.x.x.30 444 Server 444 netmask 255.255.255.255 0 0
access-group fromoutside in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 24.x.x.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 10.0.0.0 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
sysopt connection permit-l2tp
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup remote address-pool vpn
vpngroup remote default-domain medart.local
vpngroup remote split-tunnel remote_splitTunnelAcl
vpngroup remote idle-time 1800
vpngroup remote password ********
telnet 10.0.0.0 255.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address Server-10.100.100.129 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:410a099298f4871dff60c20fa8921ee8
: end
[+][-]11/08/08 07:58 PM, ID: 22915050Accepted Solution

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

About this solution

Zones: Cisco PIX Firewall, SBS Small Business Server
Tags: Cisco, PIX firewall
Sign Up Now!
Solution Provided By: dcaggiano
Participating Experts: 2
Solution Grade: A
 
[+][-]11/07/08 11:18 AM, ID: 22907624Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]11/07/08 11:19 AM, ID: 22907633Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]11/07/08 11:43 AM, ID: 22907832Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]11/07/08 12:11 PM, ID: 22908085Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]11/09/08 10:49 AM, ID: 22917215Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
 
Loading Advertisement...
20091118-EE-VQP-93 - Hierarchy / EE_QW_2_20070628