[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.
03/26/2009 at 04:59PM PDT, ID: 24269610
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
9.1

pix and router ipsec vpn

Asked by nabeel92 in Cisco PIX Firewall, Network Routers, Networking Hardware Firewalls

Tags: pix and router ipsec vpn

Hi,
Ive an IPSEC tunnel b/w PIX and a router ... Can you please suggest why its not establishing the tunnel ? Router and PIX are directly connected...Given below is the code: 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
214:
215:
216:
217:
218:
219:
220:
221:
222:
223:
224:
225:
226:
227:
228:
229:
230:
231:
232:
233:
234:
235:
236:
237:
238:
239:
240:
241:
242:
243:
244:
245:
246:
247:
248:
249:
250:
251:
252:
253:
254:
255:
256:
257:
258:
259:
260:
261:
262:
263:
264:
265:
266:
267:
268:
269:
270:
271:
272:
273:

PIX
 
pixfirewall(config)# sh running-config
: Saved
:
PIX Version 8.0(3)
!
hostname pixfirewall
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!
interface Ethernet0
 nameif outside
 security-level 0
 ip address 1.1.1.2 255.0.0.0
!
interface Ethernet1
 nameif inside
 security-level 100
 ip address 10.1.1.1 255.0.0.0
!
interface Ethernet2
 nameif dmz
 security-level 50
 ip address 4.1.1.1 255.0.0.0
!
interface Ethernet3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet4
 shutdown
 no nameif
 no security-level
 no ip address
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list 1 extended permit ip any interface outside
access-list 1 extended permit ip any host 1.1.1.3
access-list 1 extended permit ip any any
access-list 101 extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
mtu dmz 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 1.1.1.3 10.1.1.2 netmask 255.255.255.255
access-group 1 in interface outside
route outside 0.0.0.0 0.0.0.0 1.1.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
pixfirewall(config)# no access-list 1 permit ip any any
pixfirewall(config)#
pixfirewall(config)# sh run
pixfirewall(config)# sh running-config cry
pixfirewall(config)# sh running-config crypto isa
pixfirewall(config)# sh running-config crypto isakmp
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption des
 hash md5
 group 2
 lifetime 86400
pixfirewall(config)#
pixfirewall(config)# sh run
pixfirewall(config)# sh running-config
: Saved
:
PIX Version 8.0(3)
!
hostname pixfirewall
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!
interface Ethernet0
 nameif outside
 security-level 0
 ip address 1.1.1.2 255.0.0.0
!
interface Ethernet1
 nameif inside
 security-level 100
 ip address 10.1.1.1 255.0.0.0
!
interface Ethernet2
 nameif dmz
 security-level 50
 ip address 4.1.1.1 255.0.0.0
!
interface Ethernet3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet4
 shutdown
 no nameif
 no security-level
 no ip address
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list 1 extended permit ip any interface outside
access-list 1 extended permit ip any host 1.1.1.3
access-list 101 extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
mtu dmz 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 1.1.1.3 10.1.1.2 netmask 255.255.255.255
access-group 1 in interface outside
route outside 0.0.0.0 0.0.0.0 1.1.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
no snmp-server location
no snmp-server contact
crypto ipsec transform-set tset esp-des esp-md5-hmac
crypto map smap 10 match address 101
crypto map smap 10 set peer 1.1.1.1
crypto map smap 10 set transform-set tset
crypto map smap interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption des
 hash md5
 group 2
 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
 pre-shared-key *
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns migrated_dns_map_1
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns migrated_dns_map_1
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect netbios
  inspect rsh
  inspect rtsp
  inspect skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect tftp
  inspect sip
  inspect xdmcp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:58dadee7ff677d49fc03ae5de4c92ffa
: end
 
 
ROUTER
 
RTR#sh run
Building configuration...
 
Current configuration : 1178 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname RTR
!
boot-start-marker
boot-end-marker
!
no logging console
!
no aaa new-model
ip cef
!
multilink bundle-name authenticated
!
crypto isakmp policy 10
 hash md5
 authentication pre-share
 group 2
crypto isakmp key cisco address 1.1.1.2
!
!
crypto ipsec transform-set tset esp-des esp-md5-hmac
!
crypto map smap 10 ipsec-isakmp
 set peer 1.1.1.2
 set transform-set tset
 match address 101
!
interface FastEthernet0/0
 ip address 20.1.1.1 255.0.0.0
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet1/0
 ip address 1.1.1.1 255.0.0.0
 duplex auto
 speed auto
 crypto map smap
!
interface FastEthernet1/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
ip route 0.0.0.0 0.0.0.0 1.1.1.2
no ip http server
no ip http secure-server
!
!
!
logging alarm informational
access-list 101 permit ip any any
!
control-plane
!
 shutdown
!
!
line con 0
 stopbits 1
line aux 0
line vty 0 4
!
!
end
[+][-]03/27/09 12:00 AM, ID: 23998509

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]03/27/09 01:30 AM, ID: 23998867

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]03/27/09 03:51 AM, ID: 23999553

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]03/27/09 06:34 AM, ID: 24000659

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04/01/09 05:36 PM, ID: 24045442

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]04/01/09 05:37 PM, ID: 24045451

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Cisco PIX Firewall, Network Routers, Networking Hardware Firewalls
Tags: pix and router ipsec vpn
Sign Up Now!
Solution Provided By: asdlkf
Participating Experts: 3
Solution Grade: A
 
 
[+][-]04/05/09 05:33 AM, ID: 24071265

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20090824-EE-VQP-74 - Hierarchy / EE_QW_3_20080625