I have an ASA 5505, with running NAT/PAT with Vlan1 (inside) and Vlan2 (outside). Inside is connected to the LAN, Outside is connected to the Internet. This works fine, LAN hosts can access ...
My Cisco vpn client drops out regularlly ( ever 10-15 min ) and I get this error message.
When VPN went down:
Secure VPN connection terminated locally by the client.
Reason 412: Th...
I am having so hard time accomplishing this b/s i am connected through hyperterminal to this pix and i don't know the ip it is assigned nor i have the password to get to it. i read the proces...
We have been having issues with Bounced Emails at random and mostly Gmail getting bounced to our Exchange server. We are using Microsoft's FrontBridge Filtering service. They have reccomended ...
hi
how i can reset password for cisco switch 2950 and 2960 (line console password and enable password) I can not enter to enter to switch
thanks
This is my first time configuring a cisco 5510 ASA firewall. How can I go to the internet using the Cisco 5510 Device?
(outside) Public block IP - 67.115.20.128 255.255.255.128
(outside...
I have a Cisco PIX 501. I used it to connect two sites together and to allow users VPN capabilities from home. I've had no problems when using window XP L2TP VPN client, but I just had a use...
I just uploaded PDM ver 5.2 to my PIX and Im having trouble getting it working.
Given the following output:
PIX# show ver
Cisco PIX Security Appliance Software Version 7.2(2)
Device...
Hello All.
I have a interesting probem. We have a client trying to access another client's ASA 5510 using Cisco VPN client. The client terminates with Reason 433. This has been going on wi...
Hello
I'm having trouble getting inbound traffic to work on a Cisco ASA5505. I have a single public IP and i need smtp and https to one server and rdp to another. I've configured the box in t...
I am working on a project involving a Cisco ASA 5500 appliance. The client ordered a PIX 506e, but Cisco shipped the ASA. I have some experience with port forwarding on PIX devices and under...
Hello, I must have made a stupid mistake when setting up my new Cisco ASA 5505. After I completed the setup wizard I was prompted to enter the password (which I did change). When I put in the ...
Hello,
I am trying to connect to the console interface of my ASA 5505. Unfortunately I don't have a single computer with serial port. Thus, I would like to use Telnet or SSH. My preferen...
OK Doing some testing set up client VPN access - the client connects and says connected - but no traffic passes and the client cannot ping any network resources,
: Saved
: Written by enabl...
Hi, I have the following configuration:
Internet----Router----Cisco ASA 5510----SWITCH CISCO 4507----Private LAN--------ISA Server
...
Hello Experts,
I'm setting up an ASA 5520 with a basic config and am having connectivity problems on the inside interface. I can ping across the ASA but can't connect to network shares, RDC, ...
I recently installed a ASA5520 (replaced a PIX 515) and Exchange 2007 on our network. For Exchange, I have two servers. One is in our network and host the Hub/CA/Mailbox roles, and the other...
Hello All,
I am receiving error when I am trying to connect to a CISCO ASA using Cisco VPN client 5.0 o Windows Vista. Strange thing is the VPN was working fine. Tried rebooting Vista, no l...
I am unable to initialize the Cisco VPN client software on a Windows XP laptop. When I click on the shortcut to intialize the program, it returns an error which reads:
"Error 51: Unable to...
Hi,
We currently have two ASA 5505's on separate ISP's. One is a slower line meant for e-mail only traffic and the other is a high-bandwidth line for outbound internet access. If the high...
Internet---DSL Modem---CiscoASA-----DMZ (Exchange Server)
|
Internal LAN
This is my current setup at home an...
Have idea the minimize command to enable the ssh on ASA 5505 box ? I need to enable ping command and ssh so that I could remotely put the configuratoin on the box again.
In PIX, i use "ca g...
One of my users has been having some issues getting to websites. The user is connecting via cisco systems vpn client on vista sp1. He's connecting to a Pix 506E. The VPN is setup to use spl...
Hi
I would like to configure Netflow on my Cisco 2811 router:
-Is it too bulky for the bandwidth and my network, I mean the traffic for this information to flow to a machine is it too much?...
Here is my basic setup:
PIX 515 with IOS 7.1(2) connected via site to site vpn with a Cisco 871W (IOS 12.4).
I originally set this up with a static address for the point to point between...
