Hello Experts -
What is the best practice for setting up NTP on a Cisco ASA 5505. I'm not looking for the commands just any tips you can provide for syncing the time of all PCs to a firewal...
Hello All,
I am receiving error when I am trying to connect to a CISCO ASA using Cisco VPN client 5.0 o Windows Vista. Strange thing is the VPN was working fine. Tried rebooting Vista, no l...
I got 2 ASA 5505 and set them up for site to site VPN. But I can't get it work and seem like it is ISAKMP problem.
From the log:
4 Apr 12 2008 08:28:52 713903 IP = 1.1.1.1, Information ...
We have a specific web application that we set our IIS timeouts to 4 hours. We recently upgraded from a PIX 515e to a ASA5510. Since then, my users are complaining about HTTPS timeouts and h...
Never had to one of these before - and foolishly I just followed the Wizard and http://www.cisco.com/en/US/docs/security/asa/asa80/getting_started/asa5505/quick/guide/ssl_vpn.html
After co...
I have a site with a data network 11.11.11.x and a phone network (Cisco) 10.1.10.x. Users at this site plug a phone into a POE switch and get a 10.1.10.x network. A Pix 501 is providing NAT/...
Cisco document PIX/ASA: Upgrade a Software Image using ASDM or CLI Configuration Example (Document ID: 69984) states,
"ASDM does not work if you upgrade (or downgrade) the security appliance ...
When I go to the web interface for my cisco 5510 I select Run ASDM, the screen flashes that says Java Starting, then I put in my username and password, and a progress bar comes up while it say...
This is my first time configuring a cisco 5510 ASA firewall. How can I go to the internet using the Cisco 5510 Device?
(outside) Public block IP - 67.115.20.128 255.255.255.128
(outside...
Hi
Have a cisco firewall.. 3 interfaces.. Outside, Inside, DMZ
I have a win2k3 domain controller on the inside Int and a couple of file servers as well..
would like to have the DMZ acc...
Hi all,
We would like to build an IPSec tunnel to a customer of ours. We have several tunnels and they are working fine, but this one just won't come up.
This is the scenario, we can use 2...
I am trying to utilize Bluecoat web filtering by using WCCP from a Cisco Firewall ASA 5510. Are there any suggestions as to setup or configurations? Attached you will find a simple diagram o...
Total cisco newb here, but very comfortable with it at the same time. An outside company setup our network, using an ASA 5510 at our main site with two PIX 501's at remote sites. VPN has been ...
Hello All
I have a new out of the box ASA5510 when I start the unit this is what I get
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot...
I am trying to use a Polycom VSX-7000 Video conferencing system behind a PIX fiewall. I have set all features in both the PIX and the VSX to recommended settings but I can't complete a connec...
Once I reset my ASA 5505 to the factory default, I either don't have the right device IP address (tried 192.168.1.1) and/or the wrong username and password. I tried leaving both blank, then ...
Is it possible to enable ICMP ping on my WAN interface for my ASA 5505 as I want to do some diagnosis and performance analysis.
Many thanks.
I am having trouble with a TCP connection being denied. Here is my setup. My main firewall is a Cisco ASA 5505 (192.168.1.1). I also have another VPN concentrator device for some corporate ...
Hi guys,
At my work, we have 3 cisco switches and they're stacked together and only 1 ip address. My questions:
what is stack ?
How does stack work ?
How do I monitor them if there is...
Hi experts,
I have a NAT exemption problem with the configuration of our new ASA 5505.
Short overview
- L2L VPN to other site is working
- Remote Access VPN with RADIUS auth is working
...
Creating a VPN from Cisco PIX 501 6.3 to SonicWall Pro2040 3.1
Attempt to communicate, Phase 1 completes and the SonicWall gives the following notification on Phase 2:
IKE Initiator: Rec...
Hi to all,
I have seven location with "vpn up". Now I want to telnet from public network (from any place) to one of the ASA 5505 for maintenance. I want to use telnet but there is some prob...
After connecting through the client VPN on my ASA 5505 I can only remote desktop (RDP) sporadically to a few of my servers. At first I can't ping or remote into my Windows server but after 5 ...
I was just wondering it there is a tool availble to help with configuring the cisco 2811 router or if it has to be done all by cli. Ive tried cisco network assitant and configuration assitant ...
Created a VPN connection in Windows to a remote network, but users can't connect from behind the ASA 5505. I believe there is some kind of fix up command or something that needs to be run, may...
