We have a specific web application that we set our IIS timeouts to 4 hours. We recently upgraded from a PIX 515e to a ASA5510. Since then, my users are complaining about HTTPS timeouts and h...
I am working on a project involving a Cisco ASA 5500 appliance. The client ordered a PIX 506e, but Cisco shipped the ASA. I have some experience with port forwarding on PIX devices and under...
I recently aquired a Cisco ASA 5505 and am wondering how to get the ASDM software off of the ASA device? Do I use a console cable? or plug directly in? Which port? Are there default passwords?...
I have taken over a network which has an ASA5520. I can access the ASA via ASDM on the maintenance interface but cannot on the inside interface. I can download and install asdm but when I tr...
Hi Expert,
I'm facing trouble related to establish VPN between our network and remote company, as trouble shooting the remote side inform me that Generic Route Encapsulation (GRE) protocol n...
I,
I don't know how to configurer my asa for block the msn messenger and yahoo messenger.
This is my configuration:
: Saved
: Written by enable_15 at 18:29:57.012 UTC Thu Jun 21 200...
Experts,
This is my first time configuring an ASA device, but not the first time I've configured firewalls. Although this device is new to me, the concepts are not.
I have a very simp...
Hi,
Can anyone help me to configure ssh remote access on the outside interface?
Ive managed to set it up easily on our PIX 506E but on the ASA its proving extremely dificult...
im sure ...
Hello All,
I have a ASA 5505 that has been working great for a few years with 2 VLANs configured. One for the outside (216.64.x.x) and one for the inside (192.168.0.1). We recently installe...
Hello Experts,
I'm setting up an ASA 5520 with a basic config and am having connectivity problems on the inside interface. I can ping across the ASA but can't connect to network shares, RDC, ...
How do I block these sites which eat a lot of our web traffic in a Cisco 1800 ?
I have a static VPN tunnel and am trying to get traffic to pass between (DMZ:4.1.0.0/16) FW01 <--> FW05 (Insiide:7.1.1.0/24).
I get the following error messages on FW01 (ASA 5510 v8.03). ...
I have a cisco asa 5505 to configure. i am having a problem locating where to setup multiple ip address from my isp. i would like to setup all my outbound traffic for .35 and my mail and web...
I want to create a simple script that can be run daily against my Cisco ASA and Layer 3 switch to back up runnning congi. I want these backed up to a local tftp server. Maybe some thing that w...
We are sending off a PIX 501 Cisco router to one of our telecommuters in another state. We want to be able to configure up the VPN and other settings of that unit from here (because we don't ...
Hi all,
I just setup two ASA and I am trying to configuring stateful failover using a crossover cable but both devices don't seem to detect each other. Below is the failover configuration:
...
Background:
Hello. I'm in the process or replacing our Cisco PIX 501 with a new Cisco ASA 5505. Behind the firewall are a hanful of servers providing services such as terminal services, e...
I am needing to know if it is possible to block Internet access (or ports 80 at least) on an internal computer based on it MAC address. We have a simple flat network with a Cisco Pix 515 (v7....
I can succefully access my Pix Device Manager (PDM) software via HTTPS but when the PDM tries to connect to the firewall it fails. Supposedly the PDM is always connected to the PIX firewall v...
Hi,
I recently had a question regarding reporting of users loggin using client vpn.
and the answer was to build a syslog server.
Can someone point me in the right direction of creating ...
Hi to all,
I have seven location with "vpn up". Now I want to telnet from public network (from any place) to one of the ASA 5505 for maintenance. I want to use telnet but there is some prob...
Hi
Have a cisco firewall.. 3 interfaces.. Outside, Inside, DMZ
I have a win2k3 domain controller on the inside Int and a couple of file servers as well..
would like to have the DMZ acc...
Hello All,
I am receiving a Removing peer from peer table failed, no match! when trying to connect to an ASA using the Cisco VPN client. There have been no changes to the ASA recently so ...
We have a PIX 515 and we're trying to trunk the ethernet interface with a switch so that we can have two VLANs (1 & 2) communicate with the router. Where I'm getting confused is the differen...
Creating a VPN from Cisco PIX 501 6.3 to SonicWall Pro2040 3.1
Attempt to communicate, Phase 1 completes and the SonicWall gives the following notification on Phase 2:
IKE Initiator: Rec...
