We have a PIX 501 firewall. Is it possible to monitor / report on what web sites are being visited?
Thanks!
Mike
I have an office that has a Cisco Pix 501e that is currently connected to the server through a serial cable. My question is is there another way to connect to the firewall through a web inter...
I have a PIX setup and used the VPN wizard to configure the VPN. I am able to connect to the VPN with the cisco client, but it wont let me talk to anything on my remote network.
I am assu...
Hi Experts,
My antispam provider is requesting me to lock down my firewall so that we only accept mails from Postinis IP range.
Required information by Postini.
IP Range: ...
Hey,
Im looking for a way of loggin users who access the network through the remote client vpn connection on the ASA5510.
Is there a way of saving a log of users who log on and details s...
Im unable to access the internet the PPOE is connected and have gotten IP but
no traffic goes anywhere. The asa 5505 had no problem at all going online.
This is my config.
ASA Version...
I had a working Cisco ASA 5505 that I was trying to enable users over the Internet to access a device on ports 8000-8010, when I completely messed up the whole unit. Before I began my adven...
Setting up a Cisco ASA 5505 router. Everything works except when I VPN in, am unable to ping internal network. Using Cisco VPN client, ipsec. Think it's a routing problem. I am able to access ...
hello,
I have a cisco pix 501
It is set to outside dhcp
i need to find out what that outside gateway_ip is
thanks
I am trying to configure a gateway-to-gateway IPSec VPN between a Netopia 3340 broadband router and a Cisco Pix 501 firewall (ver 6.3) using pre-shared keys. I have made what I think are the n...
I have posted my running config on my asa 5505 as well as error messages about denying traffic. Any help is appreciated.
Error messages:
Deny inbound UDP from 192.168.1.180/53 to FTPserv...
Dear All,
I currently have got hold of a Cisco PIX 501
I have just the power and ethernet cable, no console cable currently.
Basically i don't know any of the previous configurations ...
Imagine three devices on the inside LAN of a Cisco ASA. And there is a remote WAN site 10.1.2.0/24.
A 10.1.1.1 is the ASA and is the gateway to the Internet.
B 10.1.1.5 is a Cisco 28...
I have setup an outside connection but am being denied... I don't see what is causing the denial.
Deny tcp src outside:XX.XX.XX.210/37537 dst inside:204.16.20.88/80 by access-group "outsid...
Hi all,
We have a Cisco 877 (integrated ADSL) at one of our remote offices. I went to give myself telnet access from head office over the internet and noticed there was no "ip access-group ...
Hi have two exchange servers sitting behind one ADSL connection (on a Cisco 837). I was told that this would work if I had two public IP addresses . My ISP has assigned another block to me,:
...
I have 12 external IP Addresses that I will be adding to the 5510 from a Watchguard that we are replacing. Currently We are using AnyConnect VPN and routing to different internal subnets which...
Hi I've used CISCO IOS a lot on switch networks, 3750's etc but Pix isnt really my area. Can someone give me an example of if I have a public IP addresses of 81.86.101.77 and 81.86.101.78 how...
I recently upgraded our firewall ACLs to filter outgoing traffic... had it running for a while, but stopped it when I ran into other problems.
I am once again exploring this option, and I h...
I have read several post regarding this error, but im still not sure of the solution. I am using a PIX 515e for VPN, Firewall etc. The users outside the office recently started getting the 413...
Bit of a long brief, I know but...
I'm doing a feasibility study for offloading some of our servers to a datacentre, with DR at a second datacentre. We have some infrastructure already in ...
Hi, first of all I have limited experience configuring Cisco firewalls. We are testing a spam blocking device and I need to forward smtp (port 25) traffic to the new device for testing with th...
I want to know if this is an acceptable design just looking to ensure that Im setup according to industry standard, etc... Thoughts/comments appreciated! Thanks
Background - we are in...
What are the commands for enabling SNMP on a PIX 515E?
we are using our nessus box to successfully scan many local devices with the exception of a PIX firewall. the transcript for this scan includes the usual 'attack' and 'portscan' messages and o...
