So, i can't get into the ASDM anymore. I get an error message saying that the ASDM software is not compatible with the ASA software. now i can't get into the ASA5510 via asdm. how can i fix this?
I have a Cisco ASA-5505 that I wish to create access from DMZ to Internal, and from External to DMZ.... I have tried unsuccessfully to use the steps listed at
http://www.cisco.com/en/US/pro...
Experts,
I am trying to allow PASV FTP into my DMZ via my ASA 5505. When i try to connect via filezilla I can see that the FTP server is receiving my credentials, but is failing when trying...
I have a new ASA 5505 10 User appliance connecting a 20Mbps Cable Internet connection to the Internal network. I have configured Access rules and NAT, but obviously do not have something righ...
Experts!
I could really use your help right now. I have configured remote access VPN on my Cisco ASA 5505 but I'm not able to reach the internal network (the internal network of the ASA). I c...
Is it possible to load(restore) a configuration file to a ASA 5505 running ASA 8.0.2 & ASDM 6.1.5?
What is the proceedure?
If I must use the CLI then what is the proceedure to load/rest...
I have 2 cisco ASA 5510 units running in active/pasive. Recently, the memory/ram usage has gone up quite a bit; currently it is using around 191 mb out of 256.
How can I find out what is ...
I've been hunting through the VPN connection posts and I haven't come across a solution to my problem yet. I have a newly configured Cisco ASA 5505. I have many clients that I need to connect ...
Hi,
I have confusion on how the licensing work for the Cisco IOS
I would like to upgrade our Cisco ASAs 5505 firmware from 7.x to 8.x (total 10 ASAs)
Do I need to buy / pay cisco for this...
Hello -
I have a Cisco ASA 5520 and I am setting up an L2L tunnel with an outside party using a Checkpoint firewall. I have 5 existing tunnels on this 5520, and also created a previous tunne...
Does anyone know if the Cisco ASA 5510 allow you to block urls/websites without having to purchase the applicance? We were looking at websense/Trend micro but we dont want to spend too much mo...
Ive allready "Fixed" this - so Im just wondering if anyone knows WHY I had to fix it.........
Background:
Client has 5 sites all connected together with a big VPN Mesh (All symantec 1660 o...
We current running local Authenication on the ASA and we have just moved across to Radius authenication on our 2003 DC which when I test the radius within-side SDM we authenicate 100%, but whe...
First off, I would like to start off with saying -- pardon my lack of expertise in Cisco.. Recently I've been slowly moving along but still get stuck and need to have my hand held with configu...
Hi Expert,
I'm facing trouble related to establish VPN between our network and remote company, as trouble shooting the remote side inform me that Generic Route Encapsulation (GRE) protocol n...
Hi I've got two ASA5510's to be installed as a failover configuration active\passive. The primary is the following:
ASA5510-AIP10-K9 ASA 5510 Appliance with AIP-SSM-10, SW, 3FE, 3DES/AES
Se...
I have been getting flooded with these messages in the past few days.
313001: Denied ICMP type=8, code=0 from <Remote Monitoring IP> on interface 0
313001: Denied ICMP type=0, code=0 fr...
Hello,
I have been googling this issue for a while now and I can't seem to find a straight answer on what fixes this issue. We have a 5505 ASA connecting our corporate network to the inte...
How can I locate the onboard sound driver for SIS on NEC L1060 GA-T671MG motherboard to use with XP SP3. Friends wanted to use their XPSP3 to replace vista basic on their L1060 NEC desktop. Th...
Hi
I'm having problems setting up multiple IP addresses on my ASA 5505.
I have 8 IP's assigned to my connection
I've created a static NAT and allowed https connection to the IP but I ca...
How do I block these sites which eat a lot of our web traffic in a Cisco 1800 ?
I recently aquired a Cisco ASA 5505 and am wondering how to get the ASDM software off of the ASA device? Do I use a console cable? or plug directly in? Which port? Are there default passwords?...
Hello,
I have a question on the traffic between DMZ and Inside network:
We have web servers (Windows) in the dmz, and database servers in inside (private) network, and a Windows domain c...
Hi everyone,
We have an ASA 5540.
When i try to create users with privileges from 0 to 14 and none of them have access to the running config and to
Configuration in ASDM, and I need this...
I am having a problem getting split-tunneling to work using the Cisco VPN client v5.0 attaching to a Cisco 5540 ASA.
The client works fine without split-tunneling active. I can VPN in and ...
