Hi i am new to this. I want to configure the router with a static ip address on the WAN interface so as to give access to the internet for my LAN PCs.
I want to use CLI commands to assign t...
I am new to Cisco Firewalls and am having some trouble opening port 25 for SMTP and port 3389 for Terminal Services. Could someone explain to me how to do this using the ASDM Launcher?
I am running 8.2.1 on a couple Cisco ASA 5505's at 2 different sites. The sites are connected via a site to site VPN. I have successfully configured netflow on the ASA at site 1 to report to ...
We are trying to forward Remote Desktop port 3389 to a PC inside a network using ASDM on a ASA 5505.
The lan IP of the PC which we want to forward is 192.168.0.99. The lan IP of the ASA is 1...
Hi,
I need help setting up my ASA5505 Sec+ license to work with 2 ISPs. Right now it works just fine with one WAN interface, and I set second one as backup but not getting any traffic throu...
I am only able to access the ASA ASDM via the management console port or serial cable, I want to be able to access via the network or remotely. Please take a look at my configuration and advis...
I'm not sure how this mess got started, but here's the error message I get:
Dec 8 13:16:01 192.168.99.3 Dec 08 2008 13:16:01: %ASA-3-305005: No translation group found for tcp src inside:1...
Hi
I have installed a Cisco ASA 5510 and i want configure a IPSEC VPN Remote access for external user.
i have used the ASDM 6.0 and now i can connect without problems with the Cisco VPN ...
I am trying to set up an alternative VPN server on our network. The outside interface is set to a public IP, and the inside interface is connected to one of our core switches, and able to free...
Sir,
We have proposed Fortinet 310 B , for a customer with 4 MBPS Leased Line and 120 users in a Lan environment , Now someone has placed ZyWall as an alternative, Please Advise on the basi...
I recently installed a ASA5520 (replaced a PIX 515) and Exchange 2007 on our network. For Exchange, I have two servers. One is in our network and host the Hub/CA/Mailbox roles, and the other...
I want to start seeing threats (or blocked threats) on my ASA. I upgraded to version 8.0 (3) 20 and I enabled threat detection by adding:
threat-detection basic-threat
threat-detection sc...
Hi,
I need to setup a Cisco 877 in bridge mode, its connecting into a watchgaurd firewall which is setup to recieve its details via PPPOE
I have setup the 877 is bridge mode,
Config:
...
Hello-
I am trying to install iis on one of my servers and i go through the installation and it looks like everything installs without error. When I go into IIS however, the default websit...
I have an issue where we have several sites connected to the same Cisco ASA5510 but to different subinterfaces. Some of the subnets use the same subnets (ie. the very popular 192.168.0.0/24) I...
Hello All,
I'm having problems here is what I need:
I have someone at "XO comm" that runs a program that needs to access my 172.16.9.0/24 network, they do not need access to my 192.168....
I am trying to set up a site-site VPN between two sites. The Cisco ASA 5505 has a static public IP and the site with an Adtran router has a dynamic IP on the public interface. I have successfu...
Hello Experts,
I'm setting up an ASA 5520 with a basic config and am having connectivity problems on the inside interface. I can ping across the ASA but can't connect to network shares, RDC, ...
I can't access my Cisco PIX 515e firewall via a web interface. I ran into this problem a few months ago, called my reseller with whom I have a "support" contract, they couldn't figure out why...
I have a working site to site VPN connection between a Cisco 5510 ASA and a Cisco 5505 ASA. The problem is the Cisco 5505 is on a DSL connection that is not a static IP, so when the IP addres...
This seems to be a commonly asked question, but not of the existing answers seem to fit my situation.
After connecting to the remote network using Cisco VPN Client 4.9.01 on my MacBook Pro ...
I have just been made responsible for our network security and have found that the previous person has not documented anything. I need to reset a Cisco PIX 506e device to factory default, but...
Hi all,
I have a range of IP's set to the outside interface of my ASA 5510, and I can not get this additional IP's to ping. The ip address of the interface will ping just fine, but nothing...
I have an ASA5520 just trying to cleanup some lines that are not in use. I dont get an error, however I can't remove the statement.
I have these as follow which I cannot remove. Can anyone...
Okay i been working on this ASA for a couple of weeks and having some trouble getting certain things i want to work to work. I have 2 ISPs 1 a T-1 the other DSL. I would either like to load ba...
