Running ASA Version 7.2(3)
Used the setup from Cisco Document ID: 71028
L2TP Over IPsec Between Windows 2000/XP PC and PIX/ASA 7.2 Using Pre-shared Key Configuration Example
Also noticed th...
Our main office has a Juniper SSG140 firewall. Our remote office has a Cisco PIX 506e firewall. I need to setup a vpn between the 2 offices, so the main office can see printers in the remote...
We are setting up a new extranet link. The firewall to be used is the Cisco ASA5505. At this
point we want to get basic connectivity tested. In the past we have used PIX equipment but t...
I am very new to the Cisco world, so I'm a novice with these complex configurations. I need some help getting a config setup the way I want.
There are a couple things I want to do:
1) S...
Background:
Hello. I'm in the process or replacing our Cisco PIX 501 with a new Cisco ASA 5505. Behind the firewall are a hanful of servers providing services such as terminal services, e...
I am trying to forward a port to an internal ip address using the asdm and am pretty confused. Could someone walk me through the steps using the asdm software? I am tring to forward port 650...
Hi guys
I am having problem installing cisco vpn client 5.0.02.0090 and am getting the following error message: Error 1722. There is a problem with this Windows Installer package. i would ...
Hello
I'm having trouble getting inbound traffic to work on a Cisco ASA5505. I have a single public IP and i need smtp and https to one server and rdp to another. I've configured the box in t...
This on is for the ages! I would give a million points if I could if someone figures this one out.
I have a Cisco ASA 5510, I am initiating a VPN tunnel to a vendor who has a NetScreen FW...
Dear friends !
We have Cisco Router 2600 and the cable that is coming from ISP is connected to Ethernet port (10.xx.y.3) of the Router. Router's Fast Ethernet port (41.xxx.yy.1) is connecte...
I am having an issue with using a static route on an ASA5510 to successfully access a second subnet. We recently added a second subnet (192.168.56.0/24 ) to our network (192.168.100.0/24). A s...
I have a Cisco ASA 5510 as our firewall/gateway, with inside interface 192.168.1.x. I have two clients that we host servers for, and they are connnected to us through point to point T-1's an...
Hi ,
Please find the show version output for Cisco ASA 5520 currently in use.
Kindly suggest a stable IOS version to upgrade this firewall.
Please find the show version output for the...
I have an ASA 5510 that is at the main office. It used to have a Remote Access VPN that worked. I installed 2 ASA 5505's at remote offices and set up site to site VPN's which seemed to have ...
Hi,
I'm replacing my (2) Cisco Pix 515 firewalls with (2) ASA 5520's (running v8 firmware). The only task I have left is to configure them for Active/Standby failover config. I have gone th...
Weird problem. I have a Cisco ASA 5505. Since I put it in, everything mostly works fine. I get email from most places. However, hotmail and one of my clients that is on webmail.us do not g...
My ISP gave me another block of IPs to use on the same interface. I know I can just add a secondary IP to the interface but what else do I have to do with the second gateway? Right now I just ...
Objective: Allow my computers behind the ASA5505 to have access to the internet when I have changed the outside connection from DHCP to Static IP. No Gateway or DNS appears automatically in m...
Is it possible to connect a cisco switch (2900/2950) to a PIX 501 Outside Interface 0?????? If so, how do you configure such a connection? Can you connect to any one of four inside ports (1...
We have a PIX 515 and we're trying to trunk the ethernet interface with a switch so that we can have two VLANs (1 & 2) communicate with the router. Where I'm getting confused is the differen...
Hello,
I recently configured a Cisco ASA 5505 for one of my clients.
Everything works on the network EXCEPT inbound Email, even though I believe I have SMTP properly forwarded to the Exch...
Hi Experts,
Our company has Cisco PIX 501. My knowledge with Cisco is limited. What we are trying to do is block outbound port 25 on our network except for our one mail server. We want t...
Hi there.
I want to know the current connections from the LAN to the internet in the PIX 501, getting this info:
1. Origin IP
2. Destiny IP
3. Bandwidth usage
And that's it!
Thanks!
I setup my PIX 501 through wizard. PPPOE works , but not VPN. I am using vp client 5.0.02.9.
pixfirewall# show config
: Saved
: Written by enable_15 at 00:08:48.697 UTC Fri Jan 1 1993
PI...
Has anyone been successful in getting an iPhone to work with VPN configured with an SSL certificate? I see the option for a cert in the iPhone IPsec VPN settings but it's greyed out and I can...
